Manual de uso Orbis Deco-Termo Termostato

¿Necesita un manual para su Orbis Deco-Termo Termostato? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 2 preguntas frecuentes, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.

¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.

Manual de uso

Loading…

FLUSH MOUNTING DIGITAL THERMOSTAT
DECO TERMO
INSTRUCTIONS FOR USE
INSTALLATION
This device is designed for installing in a universal flush mounting box or surface
mounting box. Follow the next diagram for installation.
214LN
L
N
Contact NO
Contact NC
RECOMMENDATIONS
The installation should be carried out by an officially authorised technician.
Do not install near inductive charges (motors, transformers…).
A separate power supply line is advisable (if necessary from a network filter).
RESET
When resetting, the device will restore the last valid setting before the power
supply was lost: time and date and parameter configuration.
Regardless of the length of time the device is disconnected, the configuration
parameters will be saved correctly.
The time and date will be saved for a period of approximately 24 hours, without any
type of power supply.
Following a period longer than this, the device will reset to 1 January 2006, 00:00
hours.
The device is reset by pressing the 4 buttons simultaneously for more than 3
seconds.
After resetting the device, the factory default settings are the following:
Language: Spanish
Time: 00:00 (24 hour mode)
Date: 01/01/2006 – Sunday (winter)
Daylight saving adjustment in spring: last Sunday in March at 2am.
Daylight saving adjustment in autumn: Last Sunday in October at 3am.
The default temperature setting is COMFORT (22ºC).
Temperature sensor correction: ± 0.5ºC.
OPERATION
The following information is displayed on the screen:
Day of the week.
Time and date.
Room temperature.
Temperature setting and symbol corresponding to current period (comfort,
saving, anti-freezing / security).
The device is programmed using the menus and sub-menus.
The values to be programmed will flash on the display screen.
Main screen: the thermostat shows the current date and uses the selected
temperature setting. This temperature can be modified by pressing ▲▼.
: Access the CLOCK menu; validate a change by modifying and / or selecting
comfort, saving and anti-freeze / security temperature settings.
: Scroll up the menu / Increase the flashing value. If is held down the value can
be increased faster, by 5 units per second
: Scroll down the menu / Decrease the flashing value. If is held down the value
can be decreased faster, by 5 units per second.
C: Return to the previous option or display the different temperatures on the
screen. Starting from the main screen, each time the button is pressed the
following will be displayed in order:
COMFORT and the set temperature. Press ▲▼ to change the temperature.
The word COMFORT will be displayed. If no button has been pressed after 3
seconds, it will return to automatic mode.
SAVING and the set temperature. Press ▲▼ to change the temperature. The
word SAVING will be displayed. If no button has been pressed after 3
seconds, it will return to automatic mode.
ANTI-FREEZING / SECURITY and the temperature setting (2ºC in heating
mode and 55ºC in air conditioning mode). These temperatures cannot be
modified. The word ANTI-FREEZE or SECURITY will be displayed according
to the selection. If no button has been pressed after 3 seconds, it will return to
automatic mode.
CLOCK MENU
The device’s time can be set using this menu. The values to be configured include
(in this order): Year, month, day, day of the week, hour, minute.
Once MINUTE has been confirmed the display will automatically return to the MAIN
MENU and the time and date will be saved.
LANGUAGE SELECTION
The language can be set using this menu, selecting between: Spanish, English or
Portuguese.
ADJUSTMENTS MENU
This menu accesses the more complex functions of the device, such as:
configuration of temperature sensor, daylight savings changes, type of load, and
switch off mode.
- SENSOR sub-menu: The correction to be applied to the sensor can be set using
this menu. Initially no correction is established (0.0ºC), but this can be corrected as
required.
- LOAD sub-menu: The load on which the device will function can be set using
this menu, selecting between heating and air conditioning. In HEATING mode, the
“flame” symbol will be displayed when the room temperature is lower than the set
temperature.
In AIR CON mode, the “ICE” symbol will be displayed when the room temperature
is higher than the set temperature.
- SEASON sub-menu: In this menu the daylight savings changes can be set,
selecting between:
Automatic: switches to daylight saving at 2am on the last Sunday in March
and switches back at 3am on the last Sunday in October.
Manual: this allows the specific dates and times of the changes to be
established.
Disabled: daylight saving changes will not be made.
- STATUS sub-menu: The device can be left without temperature programming.
ON: The temperature programming will function.
NUM DAY: The temperature timer programming will NOT function during the
established number of days, between 1 and 31 (for example: during
holidays).
OFF: The temperature programming will NOT function.
- CONTRAST sub-menu: The level of brightness of the display (High / Low) can
be selected using this menu.
- VERSION sub-menu: The firmware version of the device can be displayed
quickly in this menu. Type: TRM V1.02.
TECHNICAL CHARACTERISTICS
Power supply: 230 V~
Power supply tolerance: ± 10%
Frequency: 50 Hz.
Rupture capacity: µ 8 (2) A / 250 V ac
Internal consumption: 16.5 VA Maximum capacitives (1.4W).
Anti-freezing Temperature: 2ºC
Operational temperature: between 0 ºC and +40 ºC
Precision: ± 1 s/24 h at 23 ºC using quartz crystal
Temperature precision: ± 0.5 ºC
Type of protection: IP 20 according to EN 60529
Class of protection: II according to EN 60335 fully installed
Directives: 2002/95/EC (RoHS) 73/23/CEE and
93/68/CEE (Electrical Safety)
89/336/CEE and 92/31/CEE (CEM)
Mark: CE
DIMENSIONS
01/11.2013 A016.35.53588
ORBIS TECNOLOGIA ELECTRICA, S.A.
Lérida, 61 E-28020 MADRID
Teléfono: +34 91 5672277; Fax: +34 91 5714006
E-mail: info@ orbis.es
http://www.orbis.es
93
86
31
45.5
60
60
Frame
Metallic frame
Comfort / saving / security
temperatures selection button and
return to previous option button.
Increase / decrease
temperature
buttons and function
selection
Menu access button /
Confirm flashing value
Descargue el manual en Español (PDF, 0.28 MB)
(Piense en el medioambiente y solo imprima este manual si es de verdad necesario)

Loading…

Puntuación

Dé su opinión de la Orbis Deco-Termo Termostato calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.
¿Estás satisfecho con elOrbis Deco-Termo Termostato?
No
Sea el primero en calificar este producto
0 votos

Únase a la conversación sobre este producto

Aquí puedes compartir lo que piensas sobre Orbis Deco-Termo Termostato. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Orbis Deco-Termo Termostato. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Orbis. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Orbis Deco-Termo Termostato en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Marca Orbis
Modelo Deco-Termo
Categoría Termostatos
Tipo de archivo PDF
Tamaño del archivo 0.28 MB

Todos los manuales para Orbis Termostatos
Más manuales de Termostatos

Preguntas frecuentes sobre Orbis Deco-Termo Termostato

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

¿Cuál es la zona neutra de un termostato? Verificado

Muchos termostatos modernos tienen una zona neutra. Si la temperatura se desvía menos de 4 °C del valor fijado, el sistema no calentará ni enfriará. Esta llamada zona neutra del termostato impide que el sistema se encienda y apague demasiado a menudo, ahorrando energía.

Ha sido de gran ayuda (1588) Leer más

¿Cuál es el mejor lugar para montar un termostato? Verificado

El mejor lugar para un termostato es aproximadamente a 1,5 metros del suelo. Nunca coloque el termostato cerca de un radiador u otro equipo que emita calor ni bajo la luz directa del sol. Elija una habitación que utilice a menudo. En la mayoría de los casos suele ser la sala de estar.

Ha sido de gran ayuda (990) Leer más
Manual de uso Orbis Deco-Termo Termostato

Productos relacionados

Categorias relacionadas