Manual de uso Adler AD 1345 Hervidor

Manual de uso

4

In order to interrupt the temperature maintenance function, remove the kettle from its base (5) or press the button (7). The keep-warm

function is maintained for max.24 hours from the last cooking.

If the water temperature in the kettle is higher than the desired temperature (more than 5 ℃), the indicator of the keep-warm function (9)

will flash until the water cools down to the pre-set temperature of 40 ℃ or 55 ℃ 80 ℃ / 90 ℃), being in the keep temperature mode all

the time.

22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.

25. Descale your kettle regularly. Using kettle with heating element covered by scale may

cause damage.

27. The device is not designed to work with external schedulers or separate remote control

system.

29. Children aged 3 to 8 years old can enable and disable the device only when it is in its

normal position of use, they are supervised or instructed on the safe use and understand

the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean or

maintain.

3. Housing

4. Handle

24. Never use kettle without filter or with open cover (automatic shutdown will not work).

1. Lid

5. Base

6. Cover opening button

9. Keep-warm function indicator

2. LED display

8. Temperature selection button

7. Power button (On / Off)

10. Cooking indicator

20. Always use caution when boiling water in the kettle. Do not touch the housing of kettle

or lid. Do not open the lid during boiling in kettle or immediately after boiling, because

steam coming out of lid can cause burns.

28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.

DEVICE DESCRIPTION ELECTRIC KETTLE AD1345

11. MIN / MAX water level indicator

21. Move the kettle only by holding it by handle..

23. Never switch on kettle without water.

26. Do not use aggressive detergents to wash the kettle housing - they can damage the

kettle or remove the markings.

BASIC OPERATION:

12. Touch panel

SINGLE WATER BOLING UP TO 100 °C

2. Fill the kettle with water so that the water level is between the maximum and minimum level on the water level indicator inside the

kettle (11).

7. If you want to turn off the kettle before the boiling water is finished, lift it from the base (5) or press the button (7).

Fill the kettle three times with water to the maximum level, boil, and pour out. To remove any factory odor.

3. Remember to close the kettle with the lid (1) after filling, otherwise, the kettle will not turn off automatically after boiling water.

6. After boiling the water, the kettle will automatically turn off, and you will hear a triple sound "di-di-di".

9. When the appliance is not in use, the LED display (2) will stay on showing the current water temperature.

1. Place the base (5) on a stable, flat, and heat-resistant surface.

ADVANCED OPERATION:

4. Insert the plug of the power cord into a 220-240V ~ 50-60Hz mains socket. Put the kettle on the base (5), you will hear the “di” sound,

and the LED display (2) will show the current water temperature.

5. Press the button (7), the cooking indicator (10) will light up, then the heater will start heating the water and the LED display (2) will start

showing the current water temperature. The temperature of the water will increase until it boils, i.e. up to 100 ° C.

WITH THE TEMPERATURE KEEP-WARM FUNCTION

Put the kettle on the stand (5), and wait until you hear the "di" sound. Press the temperature selection button (8), the LED display (2) will

show the temperature of your choice (40 ℃ or 55 ℃ / 80 ℃ / 90 ℃) and blink four times storing the selected temperature level, the

temperature hold function indicator (9) will light up. Then the LCD display (2) will show the current water temperature inside the kettle.

The kettle will stop boiling water when it reaches the selected temperature level of 40 ℃ or 55 ℃ / 80 ℃ / 90 ℃, you will hear a triple

sound "di-di-di". After reaching the set temperature, the kettle will switch to the temperature maintenance mode and will periodically heat

the water when the water temperature drops by 5 ℃ in relation to the selected temperature level.

BEFORE FIRST USE

8. The kettle can be switched on again approximately 2 minutes after the last use.

BOILING WATER TO THE SELECTED TEMPERATURE 40 ℃ OR 55 ℃ / 80 ℃ / 90 ℃

Only touch the buttons on the touch panel (12) with your fingertips, touching your fingernails may damage the touch panel!

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Adler AD 1345 Hervidor. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Adler. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Adler AD 1345 Hervidor en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Adler Hervidores
Más manuales de Hervidores

Preguntas frecuentes sobre Adler AD 1345 Hervidor

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Adler AD 08 b Hervidor

Manual de uso

Adler AD 1273 Hervidor

Manual de uso

Adler AD 1299 Hervidor

Manual de uso

Adler AD 1274 Hervidor

Manual de uso

Adler AD 1223 Hervidor

Manual de uso

Adler AD 1295b Hervidor

Manual de uso

Adler AD 1216 Hervidor

Manual de uso

Adler AD 1244 Hervidor

Categorias relacionadas