Manual de uso Beurer HK 126 XXL Nordic Taupe Almohadilla térmica

Manual de uso

12

6. OPERATION

6.1 Safety

NOTICE

•

The device is fitted with a SAFETY SYSTEM. This sensor

technology provides protection against overheating across the

entire surface of the heating element with an automatic switch-

o in the event of afault. If the SAFETY SYSTEM has switched

o the device, the control will no longer light up in any way,

even when switched on.

•

Please note that for safety reasons, the device can no longer be

operated after a fault has occurred and must either be disposed

of or be sent to the specified service address.

•

Do not under any circumstances connect the defective heating

element with another control of the same type. This would

also trigger apermanent switch-o by the safety system in the

control.

6.2 Initial use

NOTICE

Ensure that the heating element will not bunch up or become

folded during use.

1.

First, connect the control

2

to

the heating element by inserting

the plug-in coupling

6

.

2.

Then plug the mains plug

1

into

the socket.

6.3 Switching on

Press the ON-OFF button

3

. When switched on, the temperature

settings display

5

is lit up.

Switching sequence: 3-1-2-3-1...

6.4 Setting the temperature

To change the temperature, press the button for setting the

temperature

4

.

Setting 1: Minimum heat

Setting 2: Medium heat

Setting 3: Maximum heat

The fastest way to warm up the device is to initially set the

highest temperature setting.

This device has afast heating function, which allows the

device to warm up quickly in the first 10 minutes.

6.5 Automatic switch-o

This device is equipped with an automatic switch-o function.

This turns o the heat supply and the temperature settings display

approx. 90 minutes after the initial use of the device. Press the

ON-OFF button

3

to be able to restart the device. After about

5seconds it is possible to switch it on again.

 WARNING

If the device is being used over several hours, we recommend

that you set the lowest temperature setting on the control to avoid

overheating the body part being heated, which may lead to burns

to the skin.

6.6 Switching o

Press the ON-OFF button

3

to switch o the device. The

temperature settings display is no longer illuminated.

If the device is not in use, press the ON/OFF button

3

to switch o the device and pull the power plug out of

the socket.

Then disconnect the control

2

from the heating element

by unplugging the plug-in coupling

6

.

7. CLEANING AND MAINTENANCE

 WARNING

Before cleaning, always remove the power plug from the socket

first. Then disconnect the control from the heating element by

unplugging the plug-in coupling. Otherwise there is a risk of

electric shock.

NOTICE

The control must never come into contact with water or other

liquids, as this may cause damage.

•

To clean the control, use adry, lint-free cloth. Do not use any

chemical or abrasive cleaning agents.

•

Small marks on the heating element can be removed with

adamp cloth and, if necessary, with alittle liquid detergent for

delicate laundry.

NOTICE

Please note that the heating element must not be chemically

cleaned, wrung out, tumble dried, put through amangle or ironed.

Otherwise the heating element may get damaged.

•

The heating element is machine-washable.

•

Set the washing machine to aparticularly gentle wash cycle

at 30°C (wool cycle). Use a delicate laundry detergent and

measure it out according to the manufacturer’sinstructions.

•

Immediately after washing, reshape the heating element to its

original dimensions while it is still damp and spread it out flat

on aclothes horse to dry.

NOTICE

•

Do not use pegs or similar items to attach the heating element

to the clothes horse. Otherwise the heating element may get

damaged.

•

Do not reconnect the control to the heating element until the

plug-in coupling and heating element are completely dry.

Otherwise the device may get damaged.

 WARNING

Never switch the device on to dry it! Otherwise there is arisk of

electric shock.

8. WHAT IF THERE ARE PROBLEMS?

Problem

The temperature settings are not illuminated

despite the fact that

- the control is properly connected to

the heating element

- the power plug is connected to awork

-

ing socket

- the ON/OFF button

3

has been

pressed.

Possible cause The safety system has switched the device

o permanently.

Solution Send the heating element and the control for

servicing.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Beurer HK 126 XXL Nordic Taupe Almohadilla térmica. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Beurer. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Beurer HK 126 XXL Nordic Taupe Almohadilla térmica en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Beurer Almohadillas térmicas
Más manuales de Almohadillas térmicas

Preguntas frecuentes sobre Beurer HK 126 XXL Nordic Taupe Almohadilla térmica

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Beurer HK 41 Almohadilla térmica

Manual de uso

Beurer HK 123 XXL Nordic LE Almohadilla térmica

Manual de uso

Beurer HK 44 Cosy Almohadilla térmica

Manual de uso

Beurer HK 49 Almohadilla térmica

Manual de uso

Beurer HK 53 Almohadilla térmica

Manual de uso

Beurer HK 43 Supercosy Almohadilla térmica

Manual de uso

Beurer HK 25 Almohadilla térmica

Manual de uso

Beurer HK Comfort Almohadilla térmica

Categorias relacionadas