Manual de uso Black and Decker BDBBC2C Arrancador instantáneo

Manual de uso

3

ENGLISH

X Follow these instructions and those published by the

battery manufacturer, vehicle manufacturer and

manufacturer of any equipment you intend to use with

this unit. Review warning labels on these products and

on the vehicle.

X This appliance is not designed to be used as a

replacement for a vehicular battery. Do not attempt to

operate a vehicle that does not have a battery installed.

X The appliance must only be connected to a 12 V lead-

acid battery. Do not use the appliance for charging dry-

cell batteries that are commonly used with home

appliances. These batteries may burst and cause injury

to persons and damage property.

Warning! Explosive gas may be vented from the lead-acid

batteries when charging and under extreme conditions

battery leakage may occur. Make sure that the area is well

ventilated when conducting jump starting and charging

procedures.

The following symbols are marked on the appliance:

Features

1. Power LED indicator

2. Boosting LED indicator

3. Plug storage

4. Cord storage

5. 12 Vdc accessory plugs

6. Housing

Use

Warning! Make sure that the car is in neutral and the parking

brake is applied.

Step 1

X Connect the black 12 Vdc accessory plug (5) into the

12 V outlet on the working vehicle and make sure that

the power LED (1) lights.

X Start the engine on the working vehicle.

Step 2

Warning! Make sure that car is in neutral and the parking

brake is applied.

X Fully unwind the cord from the cord storage (4) and

connect the orange 12 Vdc accessory plug (5) into the

12 V outlet on the dead vehicle and make sure that the

boosting LED (2) lights.

Step 3

X When the dead car is sufficiently boosted to start the

engine both the power LED (1) and the boosting LED (2)

will change colour to green (approx. 20 minutes).

X Remove the orange 12 Vdc accessory plug (5) from the

dead car and try starting the vehicle in 3-5 second

bursts.

Note: The housing (6) and the 12 Vdc accessory plugs (5)

will become warm during the boosting process. This is

normal.

Step 4

X Remove the black 12 Vdc accessory plug (5) from the

working car and coil the cable around the cord storage

(4) and fit the 12 Vdc accessory plugs (5) into the plug

storage apertures (3).

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

care and regular cleaning.

Warning! Before performing any maintenance or cleaning

on the appliance, unplug the appliance.

X From time to time wipe the appliance with a damp cloth.

Do not use any abrasive or solvent-based cleaner. Do

not immerse the appliance in water.

X Clean the outside case with a soft cloth and, if

necessary, mild soap solution.

X Do not allow liquid to enter the unit. Do not operate

when the unit is wet.

X Keep the cords coiled during storage to prevent damage

to the cords.

Troubleshooting

If the power and boosting LED’s (1 & 2) do not light up check

the following:

X Check that the donor vehicles 12 V accessory socket is

live, some cars require the key to be in the accessory

position before the socket is live.

X Check that the 12 Vdc accessory plugs (5) are fully

inserted.

X Check for blown fuses in the 12 Vdc accessory

plugs (5).

If your car fails to start:

X Repeat steps 2-4 in the ‘use’ section and continue the

boosting process for a further 10 minutes or until the

LED’s change to green.

X If your car still fails to start we suggest you have your

battery checked by a qualified auto-electrician.

Power LED indicator.

Boosting LED indicator.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Black and Decker BDBBC2C Arrancador instantáneo. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Black and Decker. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Black and Decker BDBBC2C Arrancador instantáneo en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Black and Decker Arrancadores instantáneos
Más manuales de Arrancadores instantáneos

Preguntas frecuentes sobre Black and Decker BDBBC2C Arrancador instantáneo

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Black and Decker BDV030 Arrancador instantáneo

Manual de uso

Black and Decker BDSBC10A Arrancador instantáneo

Manual de uso

Black and Decker BDJS450 Arrancador instantáneo

Manual de uso

Black and Decker BDJS350 Arrancador instantáneo

Manual de uso

Black and Decker BDSBC30A Arrancador instantáneo

Manual de uso

Black and Decker BDJS450I Arrancador instantáneo

Manual de uso

Black and Decker JUS350B Arrancador instantáneo

Manual de uso

Black and Decker BDSBC20A Arrancador instantáneo

Categorias relacionadas