Manual de uso Black and Decker CP142 Atornillador taladrador

Manual de uso

5

ENGLISH

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Battery tool use and care

a. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

c. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

d. When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

e. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for batteries and chargers

Batteries

◆ Never attempt to open for any reason.

◆ Do not expose the battery to water.

◆ Do not store in locations where the temperature may

exceed 40 °C.

◆ Charge only at ambient temperatures between 4 °C and

40 °C.

◆ Charge only using the charger provided with the tool.

◆ When disposing of batteries, follow the instructions given

in the section “Protecting the environment”.

◆ Under extreme conditions, battery leakage may occur.

When you notice liquid on the battery, proceed as follows:

- Carefully wipe the liquid off using a cloth.

Avoid skin contact.

- In case of skin or eye contact, follow the instructions

below.

◆ Warning! The battery fluid, a 25-30% solution of potassium

hydroxide, can be harmful. In case of skin contact,

immediately rinse with water. Neutralise with a mild acid

such as lemon juice or vinegar. In case of eye contact,

rinse abundantly with clean water for at least 10 minutes.

Consult a physician.

◆ Do not incinerate the battery.

◆ Do not attempt to charge damaged batteries.

Chargers

◆ Use your Black & Decker charger only to charge the battery

in the tool with which it was supplied. Other batteries

could burst, causing personal injury and damage.

◆ Never attempt to charge non-rechargeable batteries.

◆ Have defective cords replaced immediately.

◆ Do not expose the charger to water.

◆ Do not open the charger.

◆ Do not probe the charger.

The charger is intended for indoor use only.

Electrical safety

Your charger is double insulated; therefore no earth

wire is required. Always check that the mains

voltage corresponds to the voltage on the rating

plate. Never attempt to replace the charger unit with

a regular mains plug.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Forward/reverse slider

3. Mode selector / torque adjustment collar

4. Chuck

5. Two-gear selector (CP122K/CP142K)

6. Battery charge indicator

7. Bit holder

8. Battery

Fig. A

9. Charger

10. Charger receptacle

11. Charging indicator

12. End of charge indicator

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Black and Decker CP142 Atornillador taladrador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Black and Decker. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Black and Decker CP142 Atornillador taladrador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Black and Decker Atornilladores taladrador
Más manuales de Atornilladores taladrador

Preguntas frecuentes sobre Black and Decker CP142 Atornillador taladrador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Black and Decker PF126 Atornillador taladrador

Manual de uso

Black and Decker PS142/H Atornillador taladrador

Manual de uso

Black and Decker EPC14L Atornillador taladrador

Manual de uso

Black and Decker ASL188 Atornillador taladrador

Manual de uso

Black and Decker HP144F4L Atornillador taladrador

Manual de uso

Black and Decker CD96CA Atornillador taladrador

Manual de uso

Black and Decker XTC183BK Atornillador taladrador

Manual de uso

Black and Decker BCD003 Atornillador taladrador

Categorias relacionadas