Manual de uso Black and Decker CP142 Atornillador taladrador

Manual de uso

7

ENGLISH

◆ For drilling in wood, metal and plastics, set the collar (3)

to the drilling position by aligning the symbol

with the

marking (19).

◆ For screwdriving, set the collar to the desired setting.

If you do not yet know the appropriate setting, proceed as

follows:

◆ Set the collar (3) to the lowest torque setting.

◆ Tighten the first screw.

◆ If the clutch ratchets before the desired result is

achieved, increase the collar setting and continue

tightening the screw. Repeat until you reach the correct

setting. Use this setting for the remaining screws.

CP122K/CP142K - Drilling in masonry (fig. G & H)

◆ For drilling in masonry, set the collar (3) to the hammer

drilling position by aligning the symbol

with the

marking (19).

◆ Slide the two-gear selector (5) towards the front of the

tool (2nd gear).

CP122K/CP142K - Two-gear selector (fig. H)

◆ For drilling in steel and for screwdriving applications,

slide the two-gear selector (5) towards the rear of the tool

(1st gear).

◆ For drilling in materials other than steel, slide the two-

gear selector (5) towards the front of the tool (2nd gear).

Drilling/screwdriving

◆ Select forward or reverse rotation using the forward/

reverse slider (2).

◆ To switch the tool on, press the switch (1). The tool speed

depends on how far you press the switch.

◆ To switch the tool off, release the switch.

Hints for optimum use

Drilling

◆ Always apply a light pressure in a straight line with the

drill bit.

◆ Just before the drill tip breaks through the other side of

the workpiece, decrease pressure on the tool.

◆ Use a block of wood to back up workpieces that may

splinter.

◆ Use spade bits when drilling large diameter holes in

wood.

◆ Use HSS drill bits when drilling in metal.

◆ Use masonry bits when drilling in soft masonry.

◆ Use a lubricant when drilling metals other than cast iron

and brass.

◆ Make an indentation using a centre punch at the centre of

the hole to be drilled in order to improve accuracy.

Screwdriving

◆ Always use the correct type and size of screwdriver bit.

◆ If screws are difficult to tighten, try applying a small

amount of washing liquid or soap as a lubricant.

◆ Always hold the tool and screwdriver bit in a straight line

with the screw.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

◆ Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

◆ Regularly open the chuck and tap it to remove any dust

from the interior.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Black and Decker CP142 Atornillador taladrador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Black and Decker. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Black and Decker CP142 Atornillador taladrador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Black and Decker Atornilladores taladrador
Más manuales de Atornilladores taladrador

Preguntas frecuentes sobre Black and Decker CP142 Atornillador taladrador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Black and Decker XTC143BK Atornillador taladrador

Manual de uso

Black and Decker EPC18 Atornillador taladrador

Manual de uso

Black and Decker BDCH188 Atornillador taladrador

Manual de uso

Black and Decker KC9652 Atornillador taladrador

Manual de uso

Black and Decker CD18C Atornillador taladrador

Manual de uso

Black and Decker MT188 Atornillador taladrador

Manual de uso

Black and Decker KC7251 Atornillador taladrador

Manual de uso

Black and Decker CP122 Atornillador taladrador

Categorias relacionadas