Manual de uso Black and Decker KA86 Lijadora de banda

Manual de uso

6

ENGLISH

Features

1. On/off switch

2. Lock-on button

3. Dust bag

4. Dust extraction outlet

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting a sanding belt (fig. A)

Warning! Never use the tool without a sanding belt (6).

 Pull the tension lever (5) outward to release the tension

on the sanding belt (6).

 Remove the old sanding belt (6).

 Place a new sanding belt (6) over the rollers. Ensure

that the arrow on the sanding belt (6) points in the same

direction as the arrow on the tool.

 To ensure a correct tracking, the sanding belt (6) must

be centred over the rollers.

 Push the tension lever (5) inward to tension the sanding

belt (6).

Fitting and removing the dustbag (fig. B)

 Slide the dustbag (3) over the dust extraction outlet (4).

 To remove the dustbag (3), slide it off the outlet.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not overload.

The auto tracking feature of this sander allows you to sand

without adjusting the location of the sanding belt (6).

 Make sure that the sanding belt (6) is centred over the

rollers during assembly.

 During use, if the sanding belt (6) begins to track

incorrectly, remove the belt sander from the work piece

and allow it to run briefly. The sanding belt (6) will return

to its centred position.

 If the sanding belt (6) does not return to the centred

position, allow the unit to cool for 5 minutes and repeat.

Switching on and off (fig. D)

 To switch the tool on, press the on/off switch (1).

 For continuous operation, press the lock-on button (2)

and release the on/off switch (1).

 To switch the tool off, release the on/off switch (1).

 To switch the tool off when in continuous operation,

press the on/off switch (1) once more and release it.

Emptying the dustbag

The dustbag (3) should be emptied every 10 minutes.

 Unzip the dustbag (3) and empty it before continuing.

Hints for optimum use

 Always hold the tool with both hands (fig. C).

 Do not exert too much pressure on the tool.

 Regularly check the condition of the sanding belt (6).

Replace when necessary.

 Always sand with the grain of the wood.

 When sanding new layers of paint before applying

another layer, use extra fine grit.

 On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start

with a medium grit. In both cases, gradually change to a

fine grit for a smooth finish.

 Consult your retailer for more information on available

accessories.

Accessories

The performance of your tool depends on the accessory

used. Black & Decker and Piranha accessories are

engineered to high quality standards and designed to

enhance the performance of your tool. By using these

accessories you will get the very best from your tool.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Warning! Before performing any maintenance, switch off

and unplug the tool.

 Regularly clean the ventilation slots in your tool using a

soft dry brush or dry cloth.

 Regularly clean the motor housing using a clean damp

cloth. Do not use any abrasive or solvent-based

cleaner.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Black and Decker KA86 Lijadora de banda. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Black and Decker. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Black and Decker KA86 Lijadora de banda en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Black and Decker Lijadoras de banda
Más manuales de Lijadoras de banda

Preguntas frecuentes sobre Black and Decker KA86 Lijadora de banda

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Black and Decker XTA900E Lijadora de banda

Manual de uso

Black and Decker KA75 Lijadora de banda

Manual de uso

Black and Decker KA85 Lijadora de banda

Manual de uso

Black and Decker BR318 Lijadora de banda

Manual de uso

Black and Decker KA83E Lijadora de banda

Manual de uso

Black and Decker KA89E Lijadora de banda

Manual de uso

Black and Decker KA900E Lijadora de banda

Manual de uso

Black and Decker XTA80EK Lijadora de banda

Categorias relacionadas