Manual de uso Bosch PDA 180 E Lijadora delta

Manual de uso

English | 13

Louvre Sanding Attachment (see figure D)

The louvre sanding attachment (8) allows you to work on

areas that are particularly difficult to reach, such as slats on

windows, cupboards and doors.

Sanding Finger, Flat (see figure E)

The flat sanding finger (10) allows you to work on narrow

slits and tight gaps.

Sanding Finger, Oval (see figure F)

The oval sanding finger (11) allows you to work on curves,

hollow parts and concave surfaces, such as those found on

items of furniture, handrails and radiators.

Operation

Starting Operation

u Pay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the power tool. Power tools marked

with 230V can also be operated with 220V.

u Products that are only sold in AUS and NZ: Use a resid-

ual current device (RCD) with a nominal residual current

of 30 mA or less.

Switching On/Off

u Make sure that you are able to press the On/Off switch

without releasing the handle.

To switch on the power tool, slide the on/off switch(1) for-

ward so that "I" appears on the switch.

To switch off the power tool, slide the on/off switch(1)

backwards so that "0" appears on the switch.

Preselecting the orbital stroke rate (PDA 180 E)

You can even preselect the orbital stroke rate during opera-

tion using the necessary orbital stroke rate preselection

thumbwheel (2).

The required orbital stroke rate is dependent on the material

and the work conditions and can be determined using prac-

tical tests.

Working Advice

u Pull the plug out of the socket before carrying out any

work on the power tool.

u Always wait until the power tool has come to a com-

plete stop before placing it down.

The material removal rate when sanding is primarily determ-

ined by the choice of sanding sheet and the preselected or-

bital stroke rate (PDA 180 E).

Only immaculate sanding sheets achieve good sanding per-

formance and make the power tool last longer.

Be sure to apply consistent contact pressure in order to in-

crease the lifetime of the sanding sheets.

Excessively increasing the contact pressure will not lead to

increased sanding performance, rather it will cause more

severe wear of the power tool and of the sanding sheet.

To sand corners, edges and hard-to-reach areas accurately,

you can also work with the tips alone or with an edge of the

sanding plate.

Do not use a sanding sheet for other materials after it has

been used to work on metal.

Use only original Bosch sanding accessories.

Maintenance and Servicing

Maintenance and Cleaning

u Pull the plug out of the socket before carrying out any

work on the power tool.

u To ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord

needs to be replaced, this must be done by Bosch or by a

customer service centre that is authorised to repair Bosch

power tools.

After-sales service and advice on using products

Our after-sales service can answer questions concerning

product maintenance and repair, as well as spare parts. You

can find exploded drawings and information on spare parts

at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the type plate of

the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or ar-

range the collection of a product in need of servicing or re-

pair.

Tel. Service: (0344) 7360109

E-Mail: [email protected]

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: (01) 4666700

Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Bosch Power Tools 1 609 92A 4LA | (18.10.2018)

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Bosch PDA 180 E Lijadora delta. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Bosch. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Bosch PDA 180 E Lijadora delta en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Bosch Lijadoras delta
Más manuales de Lijadoras delta

Preguntas frecuentes sobre Bosch PDA 180 E Lijadora delta

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Bosch EasySander 12 Lijadora delta

Manual de uso

Bosch PSM 160 A Lijadora delta

Manual de uso

Bosch PSM 18 LI Lijadora delta

Manual de uso

Bosch PSM Primo Lijadora delta

Manual de uso

Bosch PDA 180 Lijadora delta

Manual de uso

Chicago Pneumatic CP7263 Lijadora delta

Manual de uso

Parkside IAN 61649 Lijadora delta

Manual de uso

Chicago Pneumatic CP7264 Lijadora delta

Categorias relacionadas