Manual de uso Breville VKT146X New York Hervidor

Manual de uso

54

IMPORTANT SAFETY INFORMATION

READ CAREFULLY AND KEEP FOR

FUTURE REFERENCE

This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or lack of

experience and knowledge if they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved. Children shall not play with

the appliance. Cleaning and user

maintenance shall not be made by

children unless they are older than 8

and supervised. Keep the appliance

and its cord out of the reach of children

aged less than 8 years.

Never use a power base other than the

one supplied with the appliance.

Never ll the kettle above the MAX

marking. If the kettle is overlled,

boiling water may be ejected.

If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualied

persons in order to avoid a hazard.

• This appliance generates heat during use. Adequate

precaution must be taken to prevent the risk of burns,

scalds, res or other damage to persons or property

caused by touching the exterior whilst in use or during

cooling.

• Never use this appliance for anything other than its

intended use. This appliance is for household use only.

Do not use this appliance outdoors.

• Always ensure that hands are dry before handling the

plug or switching on the appliance.

• Always use the appliance on a stable, secure, dry and

level surface.

• This appliance must not be placed on or near any

potentially hot surfaces (such as a gas or electric hob).

• Do not use the appliance if it has been dropped, if

there are any visible signs of damage or if it is leaking.

• Ensure the appliance is switched off and unplugged

from the supply socket after use and before cleaning.

• Always allow the appliance to cool before cleaning or

storing.

• Never immerse any part of the appliance or power cord

and plug in water or any other liquid.

• Never let the power cord hang over the edge of a work

top, touch hot surfaces or become knotted, trapped or

pinched.

• Never leave the appliance unattended when in use.

• Beware of steam coming from the spout or lid

especially during relling. Never open the lid during the

boiling cycle.

• Never use the appliance without the lter tted.

• Never ll the appliance when it is positioned on the

power base.

• Never use the kettle without sufcient water in the

kettle for it to operate correctly.

• Never allow the appliance to boil dry.

UK

FITTING OF A PLUG - FOR U.K. AND IRELAND ONLY

This appliance must be earthed.

If the plug is not suitable for the socket outlets in your home, it

can be removed and replaced by a plug of the correct type.

If the fuse in a moulded plug needs to be changed, the fuse

cover must be retted. The appliance must not be used without

the fuse cover tted.

If the plug is unsuitable, it should be dismantled and removed

from the supply cord and an appropriate plug tted as detailed.

If you remove the plug it must not be connected to a 13 amp

socket and the plug must be disposed of immediately.

If the terminals in the plug are not marked or if you are unsure

about the installation of the plug please contact a qualied

electrician.

Blue

(Neutral)

Brown

(Live)

Fuse

Green/Yellow

(Earth)

Plug should be ASTA approved to BS1363

Fuse should be ASTA approved to BS1362

Ensure that the outer sheath of

the cable is firmly held by the cord grip

13A

PARTS

1. 360° rotational power base with cord storage

2. Spout

3. Lid

4. Water level window

5. Illuminated on/off switch

BEFORE FIRST USE

Remove any packaging and promotional material from

your kettle and position it on a stable, secure, dry and

level work surface away from the edge.

Before connecting to a power source, make sure your

mains supply voltage is the same as the one indicated on

the appliance. Connect the plug to a suitable power outlet

and make sure that the power cord does not overhang

the work surface. Excess power cord can be stored in the

power base.

Remove the kettle from the power base. Fill it to the

maximum mark.

Place the kettle back onto the power base. Switch the

kettle on, allow it to boil then discard the water. Repeat

twice. This will remove any residue left over from the

manufacturing process.

USING YOUR KETTLE

1. Remove the kettle from the power base and ll it with

water either through the spout or through the opened

lid. Don’t overll the kettle and always ensure that

there is sufcient water in the kettle (approx. 250ml)

for it to operate correctly (gure 1).

2. Check the level with the kettle on its power base

(gure 2).

3. If removed, ret the lid and then switch the kettle on

by moving the switch to the down position. Make sure

that the lid is closed correctly to ensure safe operation

(gure 3).

4. When the water reaches boiling point, the kettle will

switch off automatically (gure 4).

5. You may also switch the kettle off manually at any

time by moving the switch to the up position (gure 5).

Always use caution when carrying the kettle when it is full

of boiling water and when pouring it.

IF THE KETTLE BOILS DRY

If your kettle is operated with insufcient water a built

in safety device will automatically switch it back off

preventing damage. If this should happen:

• Unplug your kettle and allow it to cool. When your

kettle has cooled down sufciently the safety device

will reset itself.

• Once the safety device has reset, rell your kettle with

cold water and use it as normal.

CLEANING

Never immerse any part of the appliance or power cord

and plug in water or any other liquid.

1. Unplug the kettle from the mains supply socket and

allow it to completely cool down before cleaning or

descaling it.

2. Clean the exterior surface of the kettle with a damp

cloth and then polish with a soft dry cloth. Do not use

steel wool pads or harsh/abrasive cleaners.

3. Descale your kettle regularly to keep it working

efciently. Use a descaling product following the

manufacturer’s instructions carefully.

CLEANING THE FILTER

• Unplug the kettle from the mains supply socket and

allow it to completely cool down.

• Open the lid and remove the lter from behind the

spout (gure 6).

• Rinse the lter under a tap whilst brushing it with a

soft brush (gure 7).

• In hard water areas it may be necessary to descale

the lter using a descaling agent. Use a descaling

product following the manufacturer’s instructions

carefully.

• The lter may be washed safely in a dishwasher.

• Ret the lter back into the kettle.

UK

VKT145X_VKT146X_19MLM1 (EMEA).indd 4-5 6/27/19 15:12

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Breville VKT146X New York Hervidor. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Breville. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Breville VKT146X New York Hervidor en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Breville Hervidores
Más manuales de Hervidores

Preguntas frecuentes sobre Breville VKT146X New York Hervidor

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Breville VKJ944X High Gloss Hervidor

Manual de uso

Breville VKJ991X Style Hervidor

Manual de uso

Breville BKE845BSS1BUS1 The Smart Luxe Hervidor

Manual de uso

Breville VKT145X New York Hervidor

Manual de uso

Breville VKT230X Edge Hervidor

Manual de uso

Breville SK500XL Hervidor

Manual de uso

Breville VKJ990X Style Hervidor

Manual de uso

Flama 711FL Hervidor

Categorias relacionadas