Manual de uso Buffalo HT497 Sellador de vacío

Manual de uso

4

EN

Location of Controls

2

4

3

1

5

7

14

13

11

8

10

12

9

6

1. Gasket: Keeps air away by forming vacuum

chamber with gasket. Clean and dry or replace

when dirty, distorted or broken.

2. Sealing strip: Place the bag to be sealed over

this strip. Clean and dry or replace when dirty,

distorted or broken.

3. Bag clip: Fix the bag when vacuum and sealing

4. Sealing bar: Coated heating element which

heats and seals the bag

5. Lid lock: Raise/lower to lock/release the lid.

6. Control panel

7. Pressure gauge: To display vacuum pressure

8. Smart Vac: In standby mode, press “Smart

Vac” button to enter smart vacuum mode. The

appliance will smartly vacuum according to the

size of bag and stuff.

- If desired, you can adjust the programmed

“Smart Vac” time. In standby mode, press

and hold the “Smart Vac” button for about 2

seconds, the indicator light will flash. Press

and to adjust the vacuum time in

the range of -10s~+10s. Close the lid and the

machine will vacuum with the set time. To

exit, just press “Stop” button to return to the

normal “Smart Vac” mode.

9. Marinate: In standby mode, press “Marinate”

to enter marinate mode. In this mode, set the

marinate time from 9-99 minutes using arrow

buttons

and (Every 9 minutes is a

vacuum cycle, which consists of three stages:

vacuum > keep vacuum > release.)

10. Seal: In standby mode, press “Seal” button (indicator flashes) and then press

and to adjust

the seal time from 0-9 seconds. This button works for both smart vacuum mode and customized

vacuum mode. Press “Seal” during vacuuming to seal directly.

11. Stop: During operation, press “Stop” button to stop operation and return to standby.

12. Customized Vac: In standby mode, press “Customized Vac” button to enter customized vacuum mode.

In this mode, you can adjust the vacuum time from 5-80 seconds by pressing

and .

13.

/ : To increase/decrease the vacuum time or sealing time

14. Display:

In standby mode:

• When powered on, it shows “On”.

• When in protected mode, it shows “CLO”.

• When in smart vacuum mode, it shows

“Au”.

• When pressing “Seal”, it shows the seal

time.

During operation:

• In smart vacuum mode, it shows the vacuum

time and remaining seal time.

• In customized vacuum mode, it shows the

remaining vacuum time and seal time.

• In marinate mode, it shows the vacuum time and

remaining marinate time.

HT497_ML_A5_v1_20240807.indb 4 2024/8/7 19:14:12

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Buffalo HT497 Sellador de vacío. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Buffalo. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Buffalo HT497 Sellador de vacío en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Buffalo Selladores de vacío
Más manuales de Selladores de vacío