Manual de uso Caliber MCC100 Radio para coche

Manual de uso

5. PRESET STATION [ 1-6 ] BUTTONS

In normal radio mode:

A).If you press one of the preset buttons more than one second, the current station is stored in

the preset memory bank.

B].To recall a preset memory, press one of the preset buttons [1-6].

In PTY radio mode, the function of preset buttons is assigned according to the following list:

DIGITAL BUTTON PROGRAM

1 NEWS

2 INFO

3 SPORT

4 POP M

5 ROCK M

6 CLASSICS M

6. RW/FF PROGRAM BUTTONS

When in TAPE mode, press RW or FF button to fast rewind or forward the tape, and press one

of them again to stop the fast forward or rewind.

When in TAPE mode, press them together at the same time to switch from one side of the tape

to the other side.

7.AF [ALTERNATIVE FREQUENCIES]

When pressed short,AF switching mode is selected and the state of AF switching mode is

displayed by AF segment in display.

Segment off:AF switching mode off.

Segment on:AF switching mode on, and has RDS information.

Segment flashing:AF switching mode is selected, but no RDS information is received yet.

When AF switching mode is selected, the radio checks the signal strength of AF constantly.The

interval of checking time of each AF depends on the signal strength of current station, from a few

minutes for a strong station to a few seconds for a weak station. Every time that a new AF is

stronger than current station, it switches over to that frequency for very short time, and NEW

FREQUENCY is displayed for 1-2 seconds. Because the mute time of AF switching or checking

time is very short, it is almost inaudible in case of normal program.

When pressed long, regional mode ON/OFF is activated.

REGIONAL MODE ON:

AF switching or PI SEEK is implemented to the station from which all PI codes are similar to the

current station. REG of individual segment is turned on also, together with displaying REG ON

on numeric display for a few seconds.

* In this double displaying mode, the some type may not be dislayed in case of not enough-space

type of display.

REGIONAL MODE OFF:

The regional code in the format of PI code is ignored when AF switching or PI SEEK is

implemented. REG of individual segment is turned off together with displaying REG OFF on

numeric display for a few seconds.

8.AUTO SEARCH TUNING(AS/PS) BUTTON

Press it to display all stations memory for 5 seconds each time, while memory digital and

frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will seek station

on current band, then write to the preset memories.

When the auto-storage operation is completed, it will automatically display for 5

GB 2

USER MANUAL

LOCATION AND FUNCTION OF CONTROLS

1. RELEASE BUTTON

Press it to flip down the front panel from the unit, then you can take away the front panel, insert

the tape into the compartment or press EJECT button to eject tape.

2. BAND BUTTON

Press it to change into RADIO mode from TAPE mode, then press it repeatedly to select your

desired radio band.

3. PTY(PROGRAM TYPE) BUTTON

Press it to turn on or off PTY mode.

While selecting PTY TYPE, its selection is made by preset buttons as described in preset key

item.

When PTY is selected, the radio starts to search corresponding PTY information, and stops if the

corresponding PTY information is detected.

If corresponding PTY information does not exist any more, PTY type is automatically exit to

normal mode.

4. POWER BUTTON

Press it to turn on or off the unit.

The unit has the function of previously playing TAPE: In spite of any previous playing mode

(RADIO OR TAPE) , press it to turn on the unit to always begin to play the tape(If there is a tape

in the compartment) after turning off the unit.

GB 1

USER MANUAL

MCC 100manual 22-06-2004 08:46 Pagina 1

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Caliber MCC100 Radio para coche. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Caliber. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Caliber MCC100 Radio para coche en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Caliber Radio para coche
Más manuales de Radio para coche

Preguntas frecuentes sobre Caliber MCC100 Radio para coche

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Caliber MCC110 Radio para coche

Manual de uso

Caliber MCD171 Radio para coche

Manual de uso

Caliber RCD236DAB-BT Radio para coche

Manual de uso

Sony CDX-M630 Radio para coche

Manual de uso

Sony XAV-AX6050 Radio para coche

Manual de uso

Sony CDX-R3000 Radio para coche

Manual de uso

Sony CDX-M8800 Radio para coche

Manual de uso

Sony CDX-GT300 Radio para coche

Categorias relacionadas