Manual de uso Casals CCS190L Sierra circular

Manual de uso

3

Circular Saw

CCS190L

Dear Customer,

Many thanks for trusting to Casals Professional.

Thanks to its continuous effort, our innovation and the

strictest quality controls, Casals Professional develops

electric Power Tools for the toughest jobs.

Read these ORIGINAL instructions carefully before

switching on the appliance and keep them for future ref-

erence. Failure to follow and observe these instructions

could lead to an accident.

GENERAL POWER TOOLS SAFETY WARNING

WARNING Read all safety warnings and all in-

structions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cord-

less) power tool.

Work Area Safety

- Keep the working area clean and well lit. Cluttered and

dark areas invite accidents.

- Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust. Power tools create sparks which may ignite the

dust or fumes.

- Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control

- CAUTION: In order to prevent overheating do not cover

the appliance.

- Ensure that neither the air access nor exit become either

totally or partially covered by drapery, clothing, etc., as this

increases the risk of re.

Electric safety

- Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

- Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges or

refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded

- Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

- Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

- When operating the power tool outdoors, use an

extension cord suitable for outdoor use. Use a cord

suitable for outdoor use reduces the risk of electric shock.

- If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

- Do not use the appliance if the cable or plug is damaged.

- Ensure that the voltage indicated on the rating label

matches the mains voltage before plugging in the

appliance.

- Only use the appliance with the specic electric

connector provided.

- If any of the appliance casings breaks, immediately

disconnect the appliance from the mains to prevent the

possibility of an electric shock.

- Do not use the appliance if it has fallen on the oor, if

there are visible signs of damage or if it has a leak.

- CAUTION: Maintain the appliance dry.

- CAUTION: Do not use the appliance near water.

- Do not use the appliance with damp hands or feet, or

when barefooted.

- Do not wrap the power cord around the appliance.

- Do not clip or crease the power cord.

- Check the state of the power cord. Damaged or tangled

cables increase the risk of electric shock.

- Do not touch the plug with wet hands.

Personal safety

- Stay alert, Watch you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in

serious personal injury.

- Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

- Prevent unintentional starting. Ensure the switch

is in the off-position before connecting the power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energizing power tools that have the switch on

invites accidents.

- Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injur.

- Do not overreach. Keep proper footing and balance

at all times.

- This enables better control of the power tool in

unexpected situations

English ORIGINAL instructions

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Casals CCS190L Sierra circular. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Casals. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Casals CCS190L Sierra circular en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Casals Sierras circular
Más manuales de Sierras circular

Preguntas frecuentes sobre Casals CCS190L Sierra circular

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Casals VSC65 Sierra circular

Manual de uso

Worx WX531L.X Sierra circular

Manual de uso

Parkside IAN 445969 Sierra circular

Manual de uso

Parkside IAN 396073 Sierra circular

Manual de uso

Vito VIBCSCB16520 Sierra circular

Manual de uso

Skil 3571 FA Sierra circular

Manual de uso

Parkside IAN 426017 Sierra circular

Manual de uso

Vito VISC12185A Sierra circular

Categorias relacionadas