Manual de uso Conair CD2112 Moldeador

Manual de uso

SET AND PROTECT

COOL AIR STYLER

model CD2112 – all versions

INSTRUCTIONS

AND STYLING

GUIDE

For your safety

and continued

enjoyment of

this product,

always read the

instruction book

carefully before

using.

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any appliance is electrically

live even when the switch is off. To reduce the

risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

4. Do not place in, or drop into water or other

liquids.

5. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING – To reduce the risk of

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. Do not pull, twist, or wrap line cord

around appliance.

3. This appliance should not be used by, on

or near children or individuals with certain

disabilities.

4. Use this appliance only for its intended use,

as described in this manual. Do not use

attachments not recommended by the

manufacturer.

5. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly or if it has been dropped or

damaged, or dropped into water. Return the

appliance to an Authorized Service Center for

examination and repair.

6. Keep the cord away from heated surfaces.

7. Never use while sleeping.

8. Never drop or insert any object into any

opening or hose.

9. Do not use outdoors or operate where aerosol

(spray) products are being used or where

oxygen is being administered.

10. Unit is hot when in use. Do not let heated

surface touch eyes or skin.

11. Do not place the heated unit directly on

any surface while it is hot or plugged in.

12. Never block the air openings of the

appliance or place it on a soft surface, such as

a bed or couch, where the air openings may be

blocked. Keep the air openings free of hair, lint

and other debris.

13. Do not use an extension cord with this

appliance.

14. Do not touch hot surfaces of the appliance.

Use handles or knobs.

15. Do not attempt to touch the housing of

your appliance near the plates, as it is hot

when in use.

16. This appliance is not a toy. Keep away

from children.

17. Do not use with a voltage converter.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This styler is intended for household use. Use on

Alternating Current (60 hertz) only. This unit is

designed to be operated at 120V AC.

This appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this

plug will fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to defeat this safety

feature.

NOTE: Do not use this styling appliance on

hair extensions.

AUTO-MONITORING FUNCTION

ALCI WITH LED INDICATOR

CHECK ALCI SAFETY FEATURE EVERY TIME

YOU USE APPLIANCE. WHEN THE LED LIGHT

IS FLASHING, THIS INDICATES THE ALCI IS

NOT FUNCTIONING PROPERLY. IF THIS IS THE

CASE, STOP USING AND RETURN APPLIANCE

TO SERVICE CENTER.

This appliance is equipped with an auto-

monitoring function Appliance Leakage Circuit

Interrupter (ALCI), a safety feature that renders

it inoperable under some abnormal conditions,

such as immersion in water. To make sure

the ALCI is functioning properly, perform the

following test. The purpose of this test is to

allow you to make sure the water sensing

system (ALCI) is working.

1. Plug in the

appliance and press

test button on plug

(see diagram).

2. The appliance will

stop working. There

will be an audible

click, reset button will

pop out and the LED light is off. This indicates

the ALCI is functioning properly.

3. To reset ALCI with a reset button (see

diagram), unit should be unplugged. Then push

reset button in and reinsert plug into outlet.

4. If ALCI is not functioning properly and

LED light is flashing, stop using immediately

and return appliance to service center. If the

appliance stops working and the LED light on

the ALCI is flashing, return appliance to service

center.

5. It is important that if immersion occurs, this

unit be brought to a service center. Do not try

to reset.

6. Be sure to repeat test every time you use the

unit to confirm ALCI is operational.

Should the appliance go off and the reset

button pop up during use, this could indicate a

malfunction in the unit. Remove plug from outlet

and allow the appliance to cool. Reinsert plug

into outlet. The appliance should then function

normally. If not, return it to an authorized Conair

Service Center for evaluation and repair.

Conair’s professional salon standards of

engineering provide you with a uniform and

improved heat recovery system that maintains

the iron at constant temperatures. There is a

constant supply of power to ensure that heat is

continuously and quickly delivered for optimal

styling results, unlike other units, which lose

heat during use. This provides consistent styling

power so that every strand of your hair is set

with the same level of heat and comes out the

same way for a perfect finish.

Never leave your styler on and unattended.

However, should you fail to turn the iron off,

it will shut itself off automatically within

60 minutes.

STYLING WITH THE

QUARTZ CERAMIC-COATED,

EASY-GLIDE PLATES & BARREL

Your new styler has a quartz ceramic-coated,

easy-glide surface. This means it’s not only

simpler to clean off styling product residue, etc.,

after each use, but you’ll find that hair glides

easily over the surface of the plates as you’re

styling. The ceramic surface also helps smooth

down flyaways. It evenly distributes heat so that

the style you create has a salon-perfect, silky

smooth, shiny finish.

UNIQUE AIRFLOW SYSTEM

This styling iron features a unique cooling

system for the outer barrel. A fan releases cool

air along the outside of the barrel to help set

your style and creates long-lasting curls.

USING INSTANT HEAT, THE 3

HEAT SETTINGS & UNIFORM

HEAT RECOVERY SYSTEM

This styling iron features a heater that

maintains constant temperature during use

for precision styling.

The Instant Heat technology has 3 heat settings.

There is a temperature range that’s gentle and

safe for every type of hair, from the finest to the

most resistant, and helps you create the look

you want.

If you have fine hair, a low temperature will

provide the best results. If you have thick, wavy

or hard-to-style hair, keep the heat setting on

high. Always test a small section of hair to

ensure the proper heat setting for your hair.

You can vary the iron’s temperature according

to your particular need!

TEMPERATURE SETTING GUIDE

HAIR TYPE TEMP. CONTROL

FRAGILE/FINE HAIR Low(L) − 320ºF

MEDIUM/

Medium(M) − 356ºF

NORMAL HAIR

WAVY/CURLY HAIR/

High(H) − 400ºF

COARSE/THICK HAIR

Stays cool with air

OUTER BARREL

flow system on

GET TO KNOW

YOUR STYLER

Temperature

Setting Indication

LED

Quartz

Ceramic-

Coated Plates

Heat Up to

400°F

ON/OFF

Button

Single

Voltage

Outer Barrel

Keeps Cool

with Airflow

Cool Tip

6 ft. Swivel

Power Cord

Open/Close

Button

Fan ON/OFF

Indication LED

GETTING STARTED

Plug the styler into any standard electrical

outlet. The RED temperature setting and GREEN

fan LED light up immediately. The lights blink

and cycle through 3 times and then turn off.

Press and hold ON/OFF button for 1–2 seconds

to turn the styler on. The unit will automatically

default to the MEDIUM heat setting. The

LOW and MEDIUM settings turn to a red LED.

The LOW red LED will remain solid, while the

MEDIUM red LED blinks. It will stop blinking

and become solid when desired temperature is

reached. The GREEN fan LED blinks and then

becomes solid. The fan starts to release cool air

and will become a solid GREEN when the correct

heat setting has been reached.

Press the ON/OFF button again to select your

desired temperature setting. Press the ON/OFF

button 2 times quickly to turn off fan. The GREEN

LED will blink. Press the ON/OFF button 2 times

quickly again to turn on the fan. The GREEN

LED becomes solid. Press and hold the ON/OFF

button for 1–2 seconds to turn the unit off. The

RED LED light will turn off immediately. The fan

and GREEN LED will remain for a few seconds

and then turn off. Unplug the unit. Allow the

styler to cool down before storing.

WARNING: The styler will get very hot within

a few seconds and should not be placed in

contact with the skin after the unit has

been turned on.

SWITCH FUNCTION FOR

TEMPERATURE SETTING

L M H

To select your temperature, press the ON/OFF

button again. Press and release button until you

reach the temperature you desire. As the

temperature increases to the next setting, the

LED lights will blink as follows:

•

Temperature setting is set to LOW. The LOW

red LED light blinks, then turns solid when the

temperature has been reached.

•

•

Temperature setting is set to MEDIUM. The LOW

red LED remains solid. MEDIUM red LED light

blinks, then turns solid when the temperature

has been reached.

• •

Temperature setting is set to

•

HIGH. The LOW

and MEDIUM red LED remain solid. HIGH setting

light blinks, then turns solid when the tempera-

ture has been reached.

TO CURL HAIR

Hair should be clean and completely dry before

using the styler. Ensure hair is dry and combed

through.

1. Separate a section of hair. The smaller the

section, the more defined the curl. The larger the

section, the looser the curl or wave.

2. Press and hold the Open/

Close button to open plates.

Take a section of hair and

place it between the plates,

roughly 2 inches from the

roots. (See Fig. 1.) Release

the plates by letting go

of the Open/Close button.

3. Turn the styler 180° back

on itself, so that the hair is

wrapped once around the

outside of the styler (Fig. 2).

Cool tips provide a safe,

heat-resistant place to hold

the styler while you curl.

4. Slowly glide the styler

along the length of hair

from roots to ends in a

downward motion (Fig. 3).

5. Release the hair from the

styler. The cool air channels set the style.

6. Repeat for each section of hair.

(F ig. 1)

(F ig. 2)

(F ig. 3)

This message about...

GROUND

FAULT

CIRCUIT

INTERRUPTERS

...can save a life!

IF YOU MUST USE YOUR STYLER IN THE

BATHROOM, INSTALL A GFCI* NOW!

Your local electrician can help you decide

which type is best for you – a portable unit that

plugs into the electrical outlet or a permanent

unit installed by your electrician. The National

Electrical Code now requires GFCIs in the

bathrooms, garages, and outdoor outlets of all

new homes.

WHY DO YOU NEED A GFCI?

Electricity and water don’t mix.

If your styler falls into water while

it’s plugged in, the electric shock

can kill you...even if the switch

is off. A regular fuse or circuit breaker won’t

protect you under these circumstances.

A GFCI offers you far greater protection.

A GFCI can save your life! Compared to

that, the price is small! Don’t wait...install

one now!

* A GFCI is a sensitive device that reacts

immediately to a small electric current leak

by stopping the electricity flow.

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device must

accept any interference received, including

interference that may cause undesired

operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

SUPPLIER’S DECLARATION

OF CONFORMITY

Brand: InfinitiPRO by Conair

Model No.: CD2112

Description: Cool Air Curler

Responsible Party: Conair Corporation,

1 Cummings Point Road,

Stamford, CT 06902 (203) 351-9000

Standards: FCC Part 15 Subpart B,

ANSI C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful

interference, and (2) This device must accept

any interference received, including interference

that may cause undesirable operation.

DATE OF ISSUE: 06/09/2021

USER MAINTENANCE

Your styling iron is virtually maintenance free.

No lubrication is needed. Keep all vents and

openings clear of dirt and dust. If cleaning

becomes necessary, disconnect the unit from

the power source, allow to cool and wipe

exterior with a cloth. If any abnormal condition

occurs, unplug the unit, allow it to cool, and

return it for repair to an Authorized Service

Center only. No repairs should be attempted by

the consumer.

CAUTION

NEVER allow the power supply cord to be pulled,

twisted, or severely bent. Never wrap the cord

tightly around the appliance. Damage will occur

at the high flex point of entry into the appliance,

causing it to rupture and short circuit. Inspect

the cord frequently for damage. Stop use

immediately if damage is visible or if unit stops

or operates intermittently.

STORAGE

When not in use, your appliance is easy to store.

Allow appliance to cool, then simply store out of

reach of children in a safe, dry location. Do not

jerk or strain cord at plug connections. Do not

wrap the line cord around the appliance. Allow

the cord to hang or lie loose and straight at the

point of entry into the appliance.

WARNING:

IF YOU THINK

THE POWER IS OFF

WHEN THE SWITCH

IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are

a dangerous combination. But did you know

that an electric appliance is still electrically

live even if the switch is off? If the plug is in,

the power is on. So when you are not using

your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED ONE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 12 months from the date

of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed,

together with your purchase receipt. California

residents need only provide proof of purchase

and should call 1-800-3-CONAIR for shipping

instructions. In the absence of a purchase

receipt, the warranty period shall be 12 months

from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED IN

DURATION TO THE 12-MONTH DURATION OF

THIS WRITTEN, LIMITED WARRANTY. Some

states do not allow limitations on how long an

implied warranty lasts, so the above limitations

may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH

OF THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you.

This warranty gives you specific legal rights,

and you may also have other rights, which vary

from state to state.

BEAUTY TIPS

To achieve the looks you love and

for more great InfinitiPRO by Conair

®

products, visit infiniti.conair.com

Please register this product at

www.conair.com/registration

For info on any Conair or InfinitiPRO by Conair

product, call 1-800-3-CONAIR or visit us

on the web at www.conair.com/infiniti

Service Center

Conair LLC

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

©2021 Conair LLC

21PA078773

IB-172 9 4 A

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Conair CD2112 Moldeador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Conair. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Conair CD2112 Moldeador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Conair Moldeadores
Más manuales de Moldeadores

Preguntas frecuentes sobre Conair CD2112 Moldeador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.