Manual de uso Conair CD253T Moldeador

Manual de uso

ROSE GOLD TITANIUM

CURLING WAND

Instructions

& Styling Guide

For your safety and

continued enjoyment

of this product, always

read the instruction book

carefully before using.

Model CD253T

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when

children are present, basic safety precautions

should always be taken, including the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any appliance is electri-

cally live even when the switch is off. To

reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it

can fall or be pulled into a tub or sink.

4. Do not place in, or drop into water or other

liquids.

5. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING – To reduce the risk of

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. This appliance should not be used by, on

or near children or individuals with certain

disabilities.

3. Use this appliance only for its intended use,

as described in this manual. Do not use attach-

ments not recommended by the manufacturer.

4. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly or if it has been dropped or

damaged, or dropped into water. Return

the appliance to an authorized service

center for examination and repair.

5. Keep the cord away from heated

surfaces. Do not pull, twist, or wrap line

cord around appliance.

6. Never use while sleeping or drowsy.

7. Never drop or insert any object into any

opening or hose.

8. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

9. Unit is hot when in use. Do not let heated

surfaces touch eyes or skin.

10. Do not place the heated unit directly on

any surface while it is hot or plugged in.

Use the stand provided.

11. Never block the air openings of the

appliance or place it on a soft surface, such

as a bed or couch, where the air openings

may be blocked. Keep the air openings free of

hair, lint and other debris.

12. Do not use an extension cord with this

appliance.

13. Do not touch hot surfaces of the

appliance. Use handles or knobs.

14. Do not attempt to touch the housing of

your appliance near the barrel, as it is hot

when in use.

15. Do not operate with a voltage converter.

16. This appliance is not a toy. Keep away

from children.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This curling wand is intended for household use.

Use on Alternating Current (60 hertz) only. This

unit is designed to be operated at 120V AC.

This appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this

plug will fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to defeat this safety

feature.

NOTE: Do not use this styling appliance on

hair extensions.

INSTANT HEAT TECHNOLOGY

The wand’s unique 30 high heat temperature

settings and Instant Heat technology provide

styling versatility for all hair types. If you have

fine hair, a low temperature will provide the

best results. If you have thick, wavy or

hard-to-curl hair, keep the heat setting on

high. You can vary the wand’s temperature

according to your particular need!

Temperature Setting Guide

Temp. Control Hair Type

Low ON – 5 Fragile/Fine Hair

Medium 6 –10 Thin Hair

Med-High 11–15 Medium/Normal Hair

High 16–20 Wavy/Curly Hair

Maximum 21–30 Coarse/Thick Hair

USING INSTANT HEAT, THE HIGH HEAT

TEMPERATURE SETTINGS &

UNIFORM HEAT RECOVERY SYSTEM

This styling wand features a ceramic heater

that maintains constant temperature during

use for precision styling.

Conair’s professional salon standards of

engineering provide you with a uniform and

improved heat recovery system that

maintains the wand at constant tempera-

tures. There is a constant surge of power to

ensure that heat is continuously and quickly

delivered for optimal styling results, unlike

other units, which lose heat during use. This

provides consistent styling power so that

every strand of your hair is set with the same

level of heat and comes out the same way

for a perfect finish.

STYLING WITH THE NEW ROSE GOLD

TITANIUM EASY-GLIDE BARREL

The barrel of your new curling wand has a

Rose Gold Titanium Technology easy-glide

surface, the newest technology. This means

it’s not only simpler to clean off styling

product residue, etc., after each use, but you’ll

find that hair glides easily over the surface of

the barrel as you’re curling. The Rose Gold

Titanium

surface also helps smooth down

flyaways for polished results. It evenly

distributes heat so that the style you create

has a salon-perfect, silky smooth, shining

finish. Hair also slips right off the barrel after

it’s curled.

The new Rose Gold Titanium

Technology is a

pleasure to work with and makes styling your

hair easier and the results more professional.

GETTING STARTED

Plug the wand into an electrical outlet. Turn on

unit. The indicator light setting will become

illuminated. Allow unit to heat up for 30

seconds.

WARNING: The curling wand’s barrel will get

very hot within a few seconds and should

not be placed in contact with the skin after

the curling wand has been turned on.

TO CURL HAIR

Hair should be clean and completely dry before

using the curling wand.

For best results, use a

light styling product before blow-drying hair.

1. Take a 1-in. wide section of hair. Starting

where you would

like your curl to

begin, wind the

section of hair

around the thicker

portion of the

barrel toward the

cool tip.

2. Hold the end of

the hair in place at the cool tip for 5 to 8

seconds, depending on hair type, and then

release. No clamp allows you to easily curl hair

without kinks. For tighter, bouncier curls, roll

less hair. For loose, free-flowing curls, roll more

hair. To set the curl, do not comb or brush hair

until it cools.

3. Repeat process on additional sections of hair

until you achieve the hairstyle you desire.

Some experience is necessary when learning

to use this curling wand. After using it several

times, you will learn the ideal way to curl and

style your hair.

GETTING TO KNOW

YOUR CURLING WAND

Due to continued product enhancements,

product image may differ slightly from

actual product purchased.

Cool Tip

Professional

Swivel Line Cord

Temperature Dial

Auto Off

Uniform Heat

Recovery System

Rose Gold

Titanium Barrel

Heat-Protective

Glove for Left Hand

Counter Rest

IMPORTANT

A heat-protective glove has been supplied to

help protect your hand from temporary contact

with the barrel when wrapping the hair around

the appliance.

Please note that the heat-protective glove is only

designed to give initial contact protection.

Discomfort will be caused by prolonged contact

with the hot surface.

Never leave your curling wand on and

unattended. However, should you fail to turn

the wand off, it will shut itself off automati-

cally within 60 minutes.

USER MAINTENANCE

Your curling wand is virtually maintenance free.

No lubrication is needed. Keep all vents and

openings clear of dirt and dust. If cleaning

becomes necessary, disconnect the unit from

the power source, allow to cool and wipe

exterior with a cloth. If any abnormal condition

occurs, unplug the unit, allow it to cool, and

return it for repair to an authorized service

representative only. No repairs should be

attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be

pulled, twisted, or severely bent. Never wrap the

cord tightly around the appliance. Damage will

occur at the high flex point of entry into the

appliance, causing it to rupture and short circuit.

Inspect the cord frequently for damage. Stop

use immediately if damage is visible or if unit

stops or operates intermittently.

STORAGE

When not in use, your appliance is easy to store.

Allow appliance to cool, then simply store out of

reach of children in a safe, dry location. Do not

jerk or strain cord at plug connections. Do not

wrap the line cord around the appliance. Allow

the cord to hang or lie loose and straight at the

point of entry into the appliance

.

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or modifications to this

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device

must accept any interference received,

including interference that may cause

undesired operation.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there

is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

SUPPLIER´S DECLARATION

OF CONFORMITY

Brand: InfinitiPRO by Conair

®

Model No.: CD253T

Description:

Rose Gold Titanium Curling Wand

Responsible Party: Conair Corporation,

150 Milford Road, East Windsor,

NJ 88520 (609) 426-1300

Standards: FCC Part 15 Subpart B,

ANSI C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) This device must

accept any interference received, including

interference that may cause undesirable

operation.

DATE OF ISSUE: 11/20/2018

WARNING:

IF YOU THINK

THE POWER IS OFF

WHEN THE SWITCH

IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are

a dangerous combination. But did you know

that an electric appliance is still electrically

live even if the switch is off? If the plug is in,

the power is on. So when you are not using

your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED FIVE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 60 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return

the defective product to the service center

listed, together with your purchase receipt and

$7.50 for postage and handling. California

residents need only provide proof of purchase

and should call 1-800-3-CONAIR for shipping

instructions. In the absence of a purchase

receipt, the warranty period shall be 60

months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 60-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR

ANY SPECIAL, INCIDENTAL, OR CONSEQUEN-

TIAL DAMAGES FOR BREACH OF THIS OR

ANY OTHER WARRANTY, EXPRESS OR

IMPLIED, WHATSOEVER. Some states do not

allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you.

This warranty gives you specific legal rights,

and you may also have other rights, which vary

from state to state.

BEAUTY TIPS:

To achieve the looks you love and

for more great InfinitiPRO by Conair

®

products, visit infiniti.conair.com

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

Please register this product at

www.conair.com/registration

For information on any Conair or InfinitiPRO by Conair

product, call 1-800-3-CONAIR or visit us on the web

at www.conair.com/infiniti

©2019 Conair Corporation

150 Milford Road, East Windsor, NJ 08520

7475 N. Glen Harbor Blvd., Glendale, AZ 85307

18PA055064

IB-15405A

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Conair CD253T Moldeador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Conair. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Conair CD253T Moldeador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Conair Moldeadores
Más manuales de Moldeadores

Preguntas frecuentes sobre Conair CD253T Moldeador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Conair CD1000 Moldeador

Manual de uso

Conair 2016G Moldeador

Manual de uso

Conair BC86 Moldeador

Manual de uso

Conair 2014G Moldeador

Manual de uso

Conair TS63X Moldeador

Manual de uso

Conair CR330CM Moldeador

Manual de uso

Conair CD1001 Moldeador

Manual de uso

Conair CD266 InfinitiPro Moldeador

Categorias relacionadas