Manual de uso DeWalt D28715 Sierra de corte

Manual de uso

D28715 Heavy-Duty 14" (355 mm) Chop Saw with Quick-Change Clamp

Scie fendeuse robuste D28715, 355 mm (14 po) dotée d’une bride à Attache Rapide

(Quick-Change)

Sierra trozadora con abrazadera de Cambio Rápido (Quick-Change) de 355 mm (14") para

trabajo pesado D28715

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-DEWALT • www.dewalt.com

DEWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286

(AUG08) Part No. N014387 D28715 Copyright © 2006, 2008 DEWALT

The following are trademarks for one or more D

EWALT power tools: the yellow and black

color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit box

configuration; and the array of lozenge-shaped humps on the surface of the tool.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT

TOOL, CALL US TOLL FREE AT: 1-800-4-D

EWALT (1-800-433-9258)

Defi nitions: Safety Guidelines

The definitions below describe the level of severity for each

signal word. Please read the manual and pay attention to these

symbols.

DANGER: Indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may result

in property damage.

Important Safety Instructions

WARNING: Read and understand all instructions. Failure to follow all instructions listed

below may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

• KEEP GUARDS IN PLACE and in working order.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that

keys and adjusting wrenches are removed from tool before turning it on.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

• DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet

locations, or expose them to rain. Keep work area well lighted.

• KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from work

area.

• MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing

starter keys.

• DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was

designed.

• USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not

designed.

• USE PROPER EXTENSION CORD. Make sure your extension cord is in good

condition. When using and extension cord, be sure to use one heavy enough to carry

the current your product will draw. An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. The following table shows the correct size to

use depending on cord length and nameplate ampere rating. If in doubt, use the next

heavier gauge. The smaller the gauge number, the heavier the cord.

Minimum Gauge for Cord Sets

Ampere Rating

Volts Total Length of Cord in Feet (meters)

120V

25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)

240V

50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)

More

Than

Not More

Than

AWG

0 6 18 16 16 14

610 18161412

10 12 16 16 14 12

12 16 14 12 Not Recommended

• WEAR PROPER APPAREL. Do not wear loose clothing, neckties, rings, bracelets, or

other jewelry which may get caught in moving parts. Nonslip footwear is recommended.

Wear protective hair covering to contain long hair. Air vents often cover moving parts

and should also be avoided.

• ALWAYS USE SAFETY GLASSES which meet the ANSI Z87.1 requirements. Also

use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have

impact resistant lenses, they are not safety glasses.

• SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand

and it frees both hands to operate tool.

• DON’T OVERREACH. Keep proper footing and balance at all times.

• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest

performance. Follow instructions for lubricating and changing accessories.

• DISCONNECT TOOLS before servicing; when changing accessories, such as blades,

bits, cutters, and the like.

• REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off

position before plugging in.

• USE RECOMMENDED ACCESSORIES. Consult the instruction manual for

recommended accessories. The use of improper accessories may cause risk of injury

to persons.

• NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the

cutting tool is unintentionally contacted.

• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that

is damaged should be carefully checked to determine that it will operate properly

and perform its intended function — check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and any other conditions that may affect

its operation. A guard or other part that is damaged should be properly repaired or

replaced.

• NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave

tool until it comes to a complete stop.

• REPLACEMENT PARTS. When servicing use only identical replacement parts.

• TO REDUCE THE RISK OF ELECTRIC SHOCK:

a. This equipment may have a polarized plug (one blade is wider than the other.)

This plug will fit in a polarized outlet only one way. If the plug does not fit, contact a

qualified electrician to install the proper outlet.

b. The tool may be equipped with a 3-prong grounding type plug. This plug is to be

used in a grounded outlet only. If the plug does not fit, contact a qualified electrician

to install the proper outlet.

c. Do not alter the plug in any way.

Additional Safety Rules for Chop Saw

• Always wear proper eye and respiratory protection.

• Before using, inspect the cutting wheel for cracks or flaws. If such a crack or flaw

is evident, discard the wheel. The wheel should also be inspected whenever you

think the tool may have been dropped. Flaws may cause wheel breakage.

• When starting the tool with a new or replacement wheel or if you are unsure of

the condition of the wheel, hold the tool in a well protected area and let it run for

one minute. If the wheel has an undetected crack or flaw, it should burst in less than

one minute. Never start the tool with a person in line with the wheel. This includes the

operator.

• In operation, avoid bouncing the wheel or giving it rough treatment. If this occurs,

stop the tool and inspect the wheel for cracks or flaws.

• NEVER have any part of your body in line with the path of the saw blade. Personal

injury will occur.

• Clean your chop saw periodically following the procedure in this manual.

• Do not remove wheel guards or base.

• ALWAYS USE THE VISE OR SPECIAL FIXTURE TO CLAMP WORK SECURELY.

Other aids such as spring, bar, or C-clamps may be appropriate for certain sizes and

shapes of workpiece. Use care in selecting and placing these clamps and make a dry

run before making a cut.

• Use only 14" type 1 wheels rated at 4100 rpm or higher.

• Allow cut off parts to cool before handling.

• Do not attempt to cut wood or plastic with this tool.

• NEVER CUT MAGNESIUM WITH THIS TOOL.

• Use chop saw in a well-ventilated area.

• Turn chop saw off before removing any pieces from the base.

• DO NOT CUT ELECTRICALLY LIVE MATERIAL.

• Do not use circular saw blades or any other toothed blades with this tool. Serious

injury may result.

• DO NOT OPERATE THIS TOOL NEAR FLAMMABLE LIQUIDS, GASES OR DUST.

Sparks or hot chips from cutting or arcing motor brushes may ignite combustible

materials.

• Do not use the side of the abrasive wheel as a deburring grinder. This will substantially

weaken the wheel creating an unsafe condition. The wheel may come apart.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work

with approved safety equipment, such as those dust masks that are specially designed

to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding,

drilling, and other construction activities. Wear protective clothing and wash

exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or

lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause

serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved

respiratory protection appropriate for the dust exposure. Direct particles away from face

and body.

WARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety

glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS wear certified

safety equipment:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3)

• ANSI S12.6 (S3.19) hearing protection

• NIOSH/OSHA/MSHA respiratory protection.

CAUTION: Wear appropriate hearing protection during use. Under some conditions

and duration of use, noise from this product may contribute to hearing loss.

CAUTION: Spark deflector will get hot. Avoid touching or adjusting while hot. Keep

cordset and materials away from spark deflector.

• The label on your tool may include the following symbols. The symbols and their

definitions are as follows:

V .................. volts A .................. amperes

Hz ................ hertz W ................. watts

min .............. minutes

................. alternating current

................ direct current n

o

................ no load speed

................. Class I Construction ................. earthing terminal

.................... (grounded) ................. safety alert symbol

................. Class II Construction .../min ...........revolutions or reciprocation

.................... (double insulated) .....................per minute

BPM ............ beats per minute

For your convenience and safety, the following warnings are on your Heavy-Duty 14"

(355 mm) Chop Saw:

FOR SAFE OPERATION READ THE INSTRUCTION MANUAL.

DO NOT USE TOOTHED BLADES.

USE ONLY REINFORCED WHEELS RATED 4100 RPM OR HIGHER.

WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.

ALWAYS: WEAR EYE PROTECTION, USE GUARDS, CLAMP WORK IN VISE,

USE PROPER RESPIRATORY PROTECTION.

DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.

Features (Fig. 1, 7)

A. Lock pin J. Wheel

B. Spark deflector screw K. Spark guard

C. Spark deflector L. Wheel lock lever

D. Base M. Trigger switch

E. Fence N. Padlock hole

F. Vise O. Extra blade bolt

G. 8mm Allen wrench P. Extra blade bolt washer

H. Crank Q. Quick-Change blade clamp

I. Vise lever

Power Supply

Be sure your power supply agrees with the nameplate marking. 120 volts, “60 Hz” means

alternating current (normal 120 volt, 60 Hz house current).

A voltage decrease of more than 10% will cause a loss of power and overheating.

Cutting Capacity

The wide vise opening and high pivot point provide cutting capacity for many large pieces.

Use the cutting capacity chart to determine total maximum size of cuts that can be made

with a new wheel.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus DeWalt D28715 Sierra de corte. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con DeWalt. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu DeWalt D28715 Sierra de corte en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para DeWalt Sierras de corte
Más manuales de Sierras de corte

Preguntas frecuentes sobre DeWalt D28715 Sierra de corte

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

DeWalt D28710 Sierra de corte

Manual de uso

DeWalt DWE46044 Sierra de corte

Manual de uso

DeWalt DWE46066 Sierra de corte

Manual de uso

DeWalt D28730 Sierra de corte

Manual de uso

Stayer TD 355 B Sierra de corte

Manual de uso

Scheppach MT150 Sierra de corte

Manual de uso

Hitachi CC 14SC Sierra de corte

Manual de uso

RIDGID R41422 Sierra de corte

Categorias relacionadas