Manual de uso DeWalt DCE530B Decapador por aire caliente

Manual de uso

ENGLISH

2

GENERAL POWER TOOL SAFETY WARNINGS



WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

seriousinjury.

SAVE ALL WARNINGS AND

INSTRUCTIONS FOR FUTURE

REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

Safety Instructions for Heat Guns

• To reduce the risk of explosion, DO NOT use in paint spray

booths or within 10' (3.0 m) of paint sprayingoperations.

• DO NOT use this tool to remove paint containing

lead. The peelings, residue and vapors of paint may

contain lead which ispoisonous.

• Hidden areas such as behind walls, ceilings, floors,

soffit boards and other panels may contain flammable

materials that could be ignited by the heat gun when

working in these locations. The ignition of these materials

may not be readily apparent and could result in property

damage and injury to persons. When working in these

locations, keep the heat gun moving in a back-and-forth

motion. Lingering or pausing in one spot could ignite the

panel or the material behindit.

NOTE: These heat guns are capable of producing

temperatures in excess of 875˚ F (468˚ C).

• DO NOT use this tool as a hairdryer.

• DO NOT use this tool to heatfood.

• DO NOT lay the heat gun on flammable surfaces when

operating the gun or immediately after shutting it off.

Allow the tool to cool before storing. Always set the gun on

a flat level surface so that the nozzle tip is pointedupward.

• DO NOT use in the presence of explosivematerials.

• Keep moveable items secured and steady whilescraping.

• NEVER obstruct the air intake or nozzle outlet. This may

cause excessive heat build up resulting in damage to

thetool.

• Be sure to direct the hot air blast in a safe direction; away

from other people or flammableobjects.

• DO NOT remove the heat barrel cover duringuse.

• KEEP FINGERS AWAY FROM METAL NOZZLE; it

becomes very hot during use and remains hot for 30

minutes after use. Wear gloves to protecthands.

• DO NOT touch the nozzle to any surface while running or

shortly afterrunning.

• DO NOT place anything inside the nozzle as it could

cause an electric shock. Do not look down the nozzle

while the unit is turned on due to the high temperatures

beingproduced.

• Splinters and small particles of stripped paint can be

ignited and blown through holes and cracks in the surface

beingstripped.

• DO NOT apply heat to the same area for a long period

oftime.

• DO NOT burn the paint. Use the scraper and keep the

nozzle at least 1" (25 mm) away from the painted surface.

When working in a vertical direction, work downwards to

prevent paint from falling into the tool andburning.

• DO NOT allow paint to adhere to the nozzle or scraper. It

couldignite.

• ALWAYS use good quality scrapers and strippingknives.

• DO NOT use the heat gun in combination with

chemicalstrippers.

• DO NOT use accessory nozzles asscrapers.

• DO NOT direct heatgun airflow directly on glass. The

glass may crack and could result in property damage or

personalinjury.

• Maintain labels and nameplates. These carry

importantinformation.

• Place the heat gun on a stable, level surface when

nothand held.

• Be constantly aware that this tool can ignite flammable

materials, soften or melt others. Regardless of the task you

are performing, shield or keep the heat gun away from

thesematerials.

• You may occasionally notice some slight smoking of the

tool after it is turned off. This is the result of heating the

residual oil that was deposited on the heating element

during the manufacturingprocess.

• Use eye protection and other safetyequipment.

• Do not expose tools to rain or wet conditions. Water

entering a tool will increase the risk of electricshock.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the tool in

unexpectedsituations.

• Store idle tools out of the reach of children and do

not allow persons unfamiliar with the tool or these

instructions to operate the tool. Tools are dangerous in

the hands of untrainedusers.

• Have your tool serviced by a qualified repair person

using only identical replacement parts. This will

ensure that the safety of the tool ismaintained.

Additional Safety Information



WARNING: To reduce the risk of fire or electric shock,

do not expose this product to rain or moisture. Store

indoors. Read instruction manual before using.



WARNING: ALWAYS use safety glasses. Everyday

eyeglasses are NOT safety glasses. Also use face or dust

mask if operation is dusty. ALWAYS WEAR CERTIFIED

SAFETYEQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratoryprotection.



WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to the State

of California to cause cancer, birth defects or

other reproductive harm. Some examples of these

chemicalsare:

• lead from lead-based paints,

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus DeWalt DCE530B Decapador por aire caliente. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con DeWalt. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu DeWalt DCE530B Decapador por aire caliente en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para DeWalt Decapadores por aire caliente
Más manuales de Decapadores por aire caliente

Preguntas frecuentes sobre DeWalt DCE530B Decapador por aire caliente

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

DeWalt DCE530P1 Decapador por aire caliente

Manual de uso

DeWalt D26960K Decapador por aire caliente

Manual de uso

DeWalt D26411 Decapador por aire caliente

Manual de uso

DeWalt D26414 Decapador por aire caliente

Manual de uso

DeWalt D26950 Decapador por aire caliente

Manual de uso

DeWalt DCE530N Decapador por aire caliente

Manual de uso

DeWalt D26960 Decapador por aire caliente

Manual de uso

DeWalt DW340K Decapador por aire caliente

Categorias relacionadas