Manual de uso DeWalt DWS520K Sierra de inmersión

Manual de uso

English

3

ADDITIONAL SPECIFIC SAFETY RULES

Safety Instructions for All Saws

a)

DANGER: Keep hands away from cutting area and the

blade. Keep your second hand on auxiliary handle, or

motor housing.

If both hands are holding the saw, they cannot

be cut by the blade.

b)

Do not reach underneath the workpiece. The guard

cannot protect you from the blade below the workpiece.

c)

Adjust the cutting depth to the thickness of the workpiece.

Less than a full tooth of the blade teeth should be visible below

the workpiece.

d)

Never hold piece being cut in your hands or across

your leg. Secure the workpiece to a stable platform.

It is important to support the work properly to minimize body

exposure, blade binding, or loss of control.

e)

Hold power tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a "live"

wire will also make exposed metal parts of the power tool

"live" and shock the operator.

f)

When ripping always use a rip fence or straight edge

guide.

This improves the accuracy of cut and reduces the

chance of blade binding.

g)

Always use blades with correct size and shape (diamond

versus round) of arbor holes.

Blades that do not match the

mounting hardware of the saw will run eccentrically, causing loss

of control.

h)

Never use damaged or incorrect blade washers or bolt.

The blade washers and bolt were specially designed for your

saw, for optimum performance and safety of operation.

CAUSES AND OPERATOR PREVENTION OF KICKBACK

– Kickback is a sudden reaction to a pinched, bound or

misaligned saw blade, causing an uncontrolled saw to lift up

and out of the workpiece toward the operator.

– When the blade is pinched or bound tightly by the kerf

closing down, the blade stalls and the motor reaction drives

the unit rapidly back toward the operator.

– If the blade becomes twisted or misaligned in the cut, the

teeth at the back edge of the blade can dig into the top

surface of the wood causing the blade to climb out of the kerf

and jump back toward operator.

Kickback is the result of tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below:

a) Maintain a firm grip with both hands on the saw and

position your body and arm to allow you to resist

kickback forces. Kickback forces can be controlled by the

operator, if proper precautions are taken.

b) When blade is binding, or when interrupting a cut for any

reason, release the trigger and hold the saw motionless

in the material until the blade comes to a complete

stop. Never attempt to remove the saw from the work

or pull the saw backward while the blade is in motion or

kickback may occur. Investigate and take corrective actions

to eliminate the cause of blade binding.

c) When restarting a saw in the workpiece, center the

saw blade in the kerf and check that the saw teeth are

not engaged into the material. If saw blade is binding, it

may walk up or kickback from the workpiece as the saw is

restarted.

d) Support large panels to minimize the risk of blade

pinching and kickback. Large panels tend to sag under

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus DeWalt DWS520K Sierra de inmersión. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con DeWalt. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu DeWalt DWS520K Sierra de inmersión en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para DeWalt Sierras de inmersión
Más manuales de Sierras de inmersión

Preguntas frecuentes sobre DeWalt DWS520K Sierra de inmersión

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

DeWalt DWS520SKH Sierra de inmersión

Manual de uso

Stayer CPT 3000 E Sierra de inmersión

Manual de uso

Virutex SRI174T Sierra de inmersión

Manual de uso

Parkside IAN 353273 Sierra de inmersión

Manual de uso

Festool TSC 55 REBI-F-Set-FS Sierra de inmersión

Manual de uso

Mafell KSP 40 Flexistem Sierra de inmersión

Manual de uso

Parkside IAN 282339 Sierra de inmersión

Manual de uso

Festool TS 55 REQ-F-Plus Sierra de inmersión

Categorias relacionadas