Manual de uso Emerson 1F85U-22PR Termostato

Manual de uso

3

INSTALLER MENU

To prevent changes that may aect system performance, this thermostat has an INSTALLER

MENU and a USER MENU. The INSTALLER MENU provides access to every option, while the

USER MENU provides access to items that will not aect system performance. To access the

INSTALLER MENU press the Menu button for 8 seconds. The display will show item 05 in the

table below. Use Next and Back to navigate through menu items. Press or to change a

menu setting.

Installer Menu #

(Hold Menu 8 Seconds)

Description

Default Setting

(ashing icons)

Settings

(Press or )

05

Outdoor Equipment: selects air

conditioner (AC) or heat pump (HP)

equipment as well as the number of

stage

AC2

AC0

AC1

AC2

HP1

10

Indoor Equipment: selects whether

the equipment is a gas furnace, elec-

tric furnace or fan only

EL2

FAN

GA1

GA2 (convenonal only)

EL1

EL2 (convenonal only)

15

Dedicated Emergency: W/E only

operates in Emergency Aux mode. W2

becomes 1st stage Aux. Heat

OFF

On

OFF

20

O,B or 3 Wire Zone Valve Selection

O

O

B

3

30

Heat Cycle Rate: how often

the heat will turn on

MEd

SLO – slow

MEd – medium

FAS – fast

32

Aux Cycle Rate: how often the

auxiliary heat will turn on

MEd

SLO – slow

MEd – medium

FAS – fast

35

Cool Cycle Rate: how often

the cooling will turn on

MEd

SLO – slow

MEd – medium

FAS – fast

50

Compressor Lockout:

protects the compressor

from short cycling

OFF

On – 5 minute delay

OFF – no delay

65

Max Heat Limit: maximum set point

for heat mode

99

47 to 99

66

Minimum Cool Limit: minimum set

point for cool mode

45 45 to 97

RC/RH Jumper Wire

This thermostat electrically connects

the RC and RH terminals so a jumper

wire is not required. If the application

provides a separate wire for RC and

RH, clip the RC/RH jumper. This will

isolate both terminals so they can be

independently used.

Baery Locaon

Premium AA alkaline batteries are

required when C-wire is not available.

When C-wire is available, the batteries

provide a back-up source of power

(this will maintain the clock in the

event of a power outage).

(Installer Menu continued on next page)

4

TEST EQUIPMENT Turn on power to the system.

Fan Operation

If your system does not have a G terminal connection, skip to Heating System.

1.) Press the fan button to select the On position. The blower should begin to operate.

2.) Press the fan button to select the Auto position. The blower should stop immediately.

Heating System

1.) Press the System button to select the Heat position. Heat Pumps only - if the auxiliary

heating system has a standing pilot, be sure to light it.

2.) Press to adjust thermostat setting to 1° above room temperature. The heating system

should begin to operate and the thermostat will indicate Heat On.

3.) For heat pump with auxiliary- Press to adjust thermostat setting to 3° above room

temperature. The auxiliary heat should begin to operate and the thermostat will indicate

Heat On Aux.

4.) Press to adjust thermostat setting 1° below room temperature. The heating system

should stop operating and the Heat On icon will disappear.

Auxiliary System ( only for heat pumps with auxiliary)

1.) Press the System button to select the Aux position.

2.) Press to adjust thermostat setting to 1° above room temperature. The auxiliary heating

system should begin to operate and the thermostat will indicate Heat On Aux.

3.) Press to adjust thermostat setting 1° below room temperature. The auxiliary heating

system should stop operating and the Heat On Aux icon will disappear.

Cooling System

1.) Press the System button to select the Cool position.

2.) Press to adjust thermostat setting 1° below room temperature. The blower should

come on immediately on high speed, followed by cold air circulation. The thermostat will

indicate Cool On. There can be up to a 5 minute delay. (see INSTALLER MENU, item 50)

3.) Press to adjust thermostat setting to 1° above room temperature. The cooling system

should stop operating and the Cool On icon will disappear.

Installer’s Menu #

(Hold Menu 8 Seconds)

Description

Default Setting

(ashing icons)

Settings

(Press or )

74

Schedule Type: set as either 7-Day,

5-1-1 Day or Non-Programmable

5

7 – 7 Day

5 – 5-1-1 Day

0 – Non Programmable

75

Denes periods per day

4

2 -leave, return

4 -wake, leave, return, sleep

76

Early Start: starts heating or

cooling early so your programmed

temperature is reached by the

programmed time

OFF

On – start early

OFF – start at program

period time

79

Fahrenheit or Celsius °F

°F – Fahrenheit

°C – Celsius

81

Temperature Display Adjustment:

adjust the displayed “Room

Temperature”

0 -5 to +5

83

Continuous Display Light: keep

the backlight always on – “C” wire

required

OFF

On – always on

OFF – momentarily

86

Change Air Filter: set up a monthly

reminder

OFF

1 to 12 – reminder time

(months)

OFF – no lter reminder

88

Auto Changeover: thermostat

automatically switches between

heat and cool

OFF

On – enable auto

OFF – disable auto

99

Keypad Lock: prevent unwanted

changes to the thermostat

OFF

On – disable buttons

OFF – all buttons are active

INSTALLER MENU (C0ntinued)

Note: If Starting Soon is shown on the display, the compressor lockout feature is operating. There will

be up to a 5 minute delay before the compressor turns on (see INSTALLER MENU, item 50).

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Emerson 1F85U-22PR Termostato. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Emerson. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Emerson 1F85U-22PR Termostato en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Emerson Termostatos
Más manuales de Termostatos

Preguntas frecuentes sobre Emerson 1F85U-22PR Termostato

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Emerson 1F85U-42PR Termostato

Manual de uso

Emerson 1F83H-21PR Termostato

Manual de uso

Emerson 1F85U-42NP Termostato

Manual de uso

Emerson 1F83C-11PR Termostato

Manual de uso

Emerson 1F85U-22NP Termostato

Manual de uso

Emerson 1F83H-21NP Termostato

Manual de uso

SilverCrest IAN 285219 Termostato

Manual de uso

Nedis ZBHTR10WT Termostato

Categorias relacionadas