5
CAPABILITIES
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
LAMINATOR CONTROLS
A On / off switch
B Standby button
C Pouch selection buttons (
, 3 Mil, 4 Mil, 5 Mil)
D Reverse button (
)
E Carry handle
F Pouch / document entry slot
G Entry support shelf
H Pouch / document exit
I Cooling system vents
J Exit tray
t Pouch Tracking System
This feature will detect and alert the user if there is a mis-feed or the document
has not gone completely through the machine in normal operating time, and
automatically revers the document until the jam is cleared.
‘Reverse’ function
To remove or re-align a pouch during lamination, press and hold the reverse
button until the pouch is ejected from the entry slot.
‘Hot Swap’ function
The Hot Swap function enables the user to instantly switch between thick and
thin pouch settings without any processing delays.
t For best results, use Fellowes ® brand thermal pouches:
3 Mil, 4 Mil, 5 Mil and 5 Mil Cold Pouches.
t For self-adhesive (cold pouches) only use the cold setting.
t This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
t Always put the item to be laminated into the appropriate sized pouch.
t Always test laminate with a similar size and thickness before final process.
t Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
t If required, trim excess material from around the item after lamination and
cooling.
FEATURES & TIPS
Performance
Entry width 125 = 12.5” / 318mm
95 = 9.5” / 240mm
Pouch thickness (min) 3 Mil (per side)
Pouch thickness (max) 5 Mil (per side)
Warm up time (estimate) 1 minute
Cool down time 60-90 minutes
Lamination speed (+/- 5%) up to19”
Number of rollers 2
Ready indication Light & beep
Auto Reverse/Reverse Yes/Yes
Clear Path / Anti-jam engine Yes
Cold lamination Yes
Technical Data
Voltage / Frequency / Current(Amps) 125 = 110-120V AC, 60Hz, 6.10A
95 = 110-120V AC, 60Hz, 6.10A
Wattage 125 = 720 Watts
95 = 720 Watts
Dimensions (HxWxD) 125 = 4.3” x 22.4” x 6.1”
95 = 4.3” x 17.7” x 5.7”
Net weight 125 = 4.6lb
95 = 4lb
Max document thickness
(laminating capacity) .021” / 0.55 mm
ENGLISH
E
Únase a la conversación sobre este producto
Aquí puedes compartir lo que piensas sobre Fellowes Callisto 95 Plastificadora. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.