Manual de uso Festool T 18+3 HPC 4.0 I-Plus Atornillador taladrador

Manual de uso

3 Safety warnings

3.1 General power tool safety warnings

WARNING!

Read all safety warnings, in

structions, illustrations and specifica

tions provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1 WORK AREA SAFETY

a. Keep work area clean and well lit. Clut

tered or dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the

dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2 ELECTRICAL SAFETY

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of

electric shock.

b. Avoid body contact with earthed or

grounded surfaces, such as pipes, radia

tors, ranges and refrigerators. There is an

increased risk of electric shock if your body

is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions.

Water entering a power tool will

increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of elec

tric shock.

e. When operating a power tool outdoors,

use an extension cord suitable for outdoor

use.

Use of a cord suitable for outdoor use

reduces the risk of electric shock.

f. If operating a power tool in a damp loca

tion is unavoidable, use a residual current

device (RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

3 PERSONAL SAFETY

a. Stay alert, watch what you are doing and

use common sense when operating a pow

er tool. Do not use a power tool while you

are tired or under the influence of drugs,

alcohol or medication.

A moment of inat

tention while operating power tools may re

sult in serious personal injury.

b. Use personal protective equipment. Al

ways wear eye protection.

Protective

equipment such as a dust mask, non-skid

safety shoes, hard hat or hearing protection

used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the

switch is in the off-position before con

necting to power source and/or battery

pack, picking up or carrying the tool. Car

rying power tools with your finger on the

switch or energising power tools that have

the switch on invites accidents.

d. Remove any adjusting key or wrench be

fore turning the power tool on.

A wrench

or a key left attached to a rotating part of

the power tool may result in personal in

jury.

e. Do not overreach. Keep proper footing and

balance at all times. This enables better

control of the power tool in unexpected sit

uations.

f. Dress properly. Do not wear loose cloth

ing or jewellery. Keep your hair and cloth

ing away from moving parts. Loose

clothes, jewellery or long hair can be

caught in moving parts.

g. If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used.

Use of dust collection can reduce

dust-related hazards.

h. Do not let familiarity gained from frequent

use of tools allow you to become compla

cent and ignore tool safety principles. A

careless action can cause severe injury

within a fraction of a second.

4 POWER TOOL USE AND CARE

a. Do not force the power tool. Use the cor

rect power tool for your application. The

correct power tool will do the job better and

safer at the rate for which it was designed.

b. Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

English

8

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Festool T 18+3 HPC 4.0 I-Plus Atornillador taladrador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Festool. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Festool T 18+3 HPC 4.0 I-Plus Atornillador taladrador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Festool Atornilladores taladrador
Más manuales de Atornilladores taladrador

Preguntas frecuentes sobre Festool T 18+3 HPC 4.0 I-Plus Atornillador taladrador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Festool T 18+3-Basic Atornillador taladrador

Manual de uso

Festool T 15+3 Atornillador taladrador

Manual de uso

Festool T18+3-E Basic Atornillador taladrador

Manual de uso

Festool CXS 2.6-Plus Atornillador taladrador

Manual de uso

Festool CXS Atornillador taladrador

Manual de uso

Festool C 18 HPC 4.0 I-Plus Atornillador taladrador

Manual de uso

Festool DRC 18/4 Atornillador taladrador

Manual de uso

Festool C 12 Li Atornillador taladrador

Categorias relacionadas