Manual de uso Gemini GSS-1522 Subwoofer

Manual de uso

(3)

INTRODUCTION:

Congratulations on your purchase of a GSS-SERIES speaker, engineered

& manufactured by Gemini Sound Products. This state of the art

speaker is backed up by a three-year warranty.

FEATURES:

All GSS Speakers Have the Following:

• Push Button Connectors • Metal Corners/Full Metal Grill • Large Carrying Handles

GSS-18 SUB:

• Passive 18" Subwoofer System • 300 Watt RMS

• Rubber Feet • 35mm Stand Mount

• Speakon

TM

Input Jacks • 8 Ohms Impedance

GSS-1522:

• 15" Woofer with High Temp Voice Coil • 12" x 4" horn & two 3" tweeters

• 160 Watt RMS • 8 Ohms Impedance

• 1/4 Input Jack

CAUTIONS:

1. All operating instructions should be read before using this equipment.

2. To reduce the risk of electrical shock, do not open the unit. There are,

NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a

qualified Gemini Sound Products service technician.

In the USA: If you experience problems with this unit, please call 1 (732) 738-9003 for

Gemini Customer Service. Do not attempt to return this equipment to your dealer.

3. Do not expose this unit to direct sunlight or to a heat source such as a

radiator or stove.

4. This unit should be cleaned only with a damp cloth. Avoid solvents or

other cleaning detergents.

5. When moving this equipment, it should be placed in its original carton

and packaging. This will reduce the risk of damage during transit.

6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY

CONTROLS OR SWITCHES.

CONNECTIONS:

PLEASE NOTE IT IS VERY IMPORTANT THAT YOUR AMPLIFIER HAS

MATCHED POWER RATINGS!

Make sure your equipment is completely OFF and also lower ALL

VOLUME, LEVEL, & GAIN controls and before connecting the speaker.

1. Use a 1/4" SPEAKER or SPEAKON

TM

CABLE (1) from your AMPLIFIER

LINE OUTPUT (2) to connect to your speakers 1/4" AMPLIFIER INPUT

JACK (3) or SPEAKON

TM

CABLE INPUT (3).

2. Another way to connect your AMPLIFIER to your speaker is the

TERMINAL CUP (4). Use the PUSH-BUTTON CONNECTORS (5) to

connect the POSITIVE (-) and NEGATIVE (-) ends of a standard

SPEAKER WIRE (6) with a 12-GAUGE minimum thickness from your

AMPLIFIER LINE OUTPUT (2) to your speakers TERMINAL CUP (4).

3. You can also use the additional 1/4” AUXILIARY or SPEAKON

TM

OUTPUT JACK (7) to CHAIN-LINK an additional speaker using an

additional 1/4" SPEAKER CABLE (8).

OPERATION:

The speakers can be used in pairs for a NORMAL setup, or in groups of

four when CHAIN-LINKED together.

NORMAL SETUP:

1. Now turn on your MIXER or other signal source.

2. Then turn on your AMPLIFIER and increase the VOLUME or GAIN control

as recommended by the AMPLIFIERS owner manual.

3. Start playing from your TURNTABLE, CD PLAYER, MIC, etc. and adjust

the volume controls from your mixer to a reasonable level.

CHAIN-LINK:

Only 1 additional speaker can be added to each speaker in a CHAIN-

LINK setup. Connect your speakers first then follow the steps for a

NORMAL setup, your AMPLIFIER should compensate for the extra speakers.

SHOULD YOU EXPERIENCE ANY DIFFICULTIES OR PROBLEMS,

PLEASE CALL: 1 (732) 738-9003 FOR GEMINI CUSTOMER SERVICE.

SPECIFICATIONS:

GSS-SUB:

Amplifier’s Output Power:..............................................................................................300 Wrms

Frequency response:………….......................................................................................30Hz-2kHz

Impedance...........................................................................................................................8 Ohms

Components:….…………...............................................................…...…………….18" Subwoofer

Dimensions:……….……........................................W 21.5 x D11.25 x H25.4 (546x 740 x 646mm)

Features:..........................Speakon

TM

Input Jacks, Carrying handles, Push button connectors,

....................................................................Rubber feet, Metal Corners/Full metal grill

Weight:……………………...........................……………..............................................77 lbs (35 kg)

GSS-1522:

Amplifier’s Output Power:..............................................................................................160 Wrms

Frequency response:…………............................…...................................….......…….32Hz-20kHz

Impedance:.........................................................................................................................8 Ohms

Components:….…………........................................15" Woofer 12" x 4" horn & two 3" tweeters

Dimensions:……….……...............................W 24.5” x D 20.25” x H 33.5” (622 x 515 x 851 mm)

Features:...................1/4” TRS Jacks, Push button connectors, Metal Corners/Full metal grill

Weight:……………………...........................……………….......................................63 lbs (28.6 kg)

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT

NOTICE FOR PURPOSE OF IMPROVEMENT.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Gemini GSS-1522 Subwoofer. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Gemini. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Gemini GSS-1522 Subwoofer en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Gemini Subwoofer
Más manuales de Subwoofer

Productos relacionados

Manual de uso

Gemini GSS-18 SUB Subwoofer

Manual de uso

Panasonic SB-WA800 Subwoofer

Manual de uso

Sony SA-W505 Subwoofer

Manual de uso

Jamo S808 SUB Subwoofer

Manual de uso

Klipsch RP-1200SW Subwoofer

Manual de uso

Sony SA-W11X Subwoofer

Manual de uso

Philips TAW8506 Subwoofer

Manual de uso

JBL Arena Sub 100P Subwoofer

Categorias relacionadas