Home > Jardín & Terraza > Bombas de piscina > Gre Bombas de piscina > Gre PP200 Bomba de piscina

Manual de uso Gre PP200 Bomba de piscina

¿Necesita un manual para su Gre PP200 Bomba de piscina? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 0 preguntas frecuentes, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.

¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.

Manual de uso

EN- Self-priming swimming pool pump

This mode allows making a correct installation with optimal results of your swimming pool pump. Carefully

read this instruction manual.

Your new pump is a one-stage self-priming, centrifugal pump, designed for use with a swimming-pool

filtering system. It is designed to be used with clean water for temperatures between 5 ºC and 35 ºC. It is

manufactured from high quality materials subject to strict hydraulic and electrical tests. A correct installation

of this pump is assured by following the instructions from this manual. We decline all responsibility for

damages caused by use different to that explained in this instruction manual.

IMPORTANT

This manual contains basic information on the safety measures to be adopted during installation and start-

up. The fitter and the user must therefore read the instructions before installation and start-up.

GENERAL SAFETY REGULATIONS

 The machines indicated in this Manual are especially designed for the pre-filtering and recirculation

of water in swimming pools

 Install them in line with the specific instructions for each installation

 All modifications to the pump require prior authorisation from the manufacturer. Original spare parts

and accessories authorised by the manufacturer ensure greater safety. The pump manufacturer is

exempt from all liability regarding any damage caused by unauthorised spare parts or accessories.

 When working on each machine or on the units linked to them, disconnect the unit from the power

supply and the startup devices, as the electrical parts of the pump are live during operation.

 All assembly and maintenance work must be carried out by qualified and authorised personnel who

have carefully read the installation and service instructions.

 To guarantee safety when operating the machine, you must comply with that set out in the

installation and service instructions.

 In the event of defective operation or faults, contact your supplier or nearest representative.

 If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified personin order to avoid



Make sure that water is unable to enter the motor or the live electrical parts.

 Avoid contact at all times - even accidentally - with moving machine parts while the machine is

running and/or before it comes to a complete standstill

 Wait for the machine to come to a halt before handling it.

 Before any electrical or mechanical maintenance operation, disconnect the unit from the power

supply and block the start-up devices.

 To reduce risk of injury, children should not use this product

 Do not bury the electric cable. Lay the cable so it cannot be damaged by machinery, like mowing

machines, etc.

 Do not start the pump before it is correctly connected to the swimming pool.

 To reduce risk of electric shock, change the electric cable immediately when damaged.

 To reduce risks of electric shock, do not use extension cables to connect the pump to a power

supply. Connect it to a correctly installed electricity outlet.

 Do not use the pump without water!

INSTALLATION

 Only authorised and qualified personnel should install the pump and its cabling, respecting the

current legislation.

 The pump should be installed horizontally, screwing it to the support, to avoid vibration and

unwanted noise.

 The pump should be installed far from any corrosive or flammable products.

 The pump should have sufficient drainage to avoid risk of flooding and should be protected from

excessive humidity.

 Install independent water inlet and outlet valves.

Puntuación

Dé su opinión de la Gre PP200 Bomba de piscina calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.

¿Estás satisfecho con elGre PP200 Bomba de piscina?
Sí No

Sea el primero en calificar este producto

0 votos

Únase a la conversación sobre este producto

Aquí puedes compartir lo que piensas sobre Gre PP200 Bomba de piscina. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Gre PP200 Bomba de piscina. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Gre. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Gre PP200 Bomba de piscina en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.