Manual de uso Hansgrohe Vernis Shape 70 CoolStart Grifería

Manual de uso

4

English

Assembly (see page 33)

Safety Notes

 Gloves should be worn during installation to prevent

crushing and cutting injuries.

 The product may only be used for bathing, hygienic

and body cleaning purposes.

 The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport

damages. After it has been installed, no transport or

surface damage will be honoured.

• The pipes and the fixture must be installed, flushed

and tested as per the applicable standards.

• The plumbing codes applicable in the respective

countries must be observed.

• The drain valve must only be used as intended. It is

not allowed to attach other objects to the drain valve,

for example a semi-pedestal.

• If the instantaneous water heater causes problems or

if you wish to increase the water flow, the EcoSmart

(flow limiter) located behind the aerator can be

removed.

Technical Data

This mixer series-produced with EcoSmart

(flow limiter)

Operating pressure: max. 1 MPa

Recommended operating pressure: 0,1 - 0,5 MPa

Test pressure: 1,6 MPa

(1 MPa = 10 bar = 147 PSI)

Hot water temperature: max. 60°C

Thermal disinfection: 70°C / 4 min

The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!

Adjustment (see page 37)

To adjust the hot water limiter. Using a hot water limiter in

combination with a continuous flow water heater is not

recommended.

Dimensions (see page 41)

Flow diagram (see page 42)

Spare parts (see page 39)

XXX = Colors

000 = Chrome Plated

670 = Matt Black

Special accessories (order as an extra)

• special tool #58085000 (see page 33)

• Installation putty (see page 34)

Cleaning (see page 38)

Operation (see page 42)

• Hansgrohe recommends not to use as drinking water

the first half liter of water drawn in the morning or

after a prolonged period of non-use.

• After periods of prolonged non-use, but at least every

third day, the fittings must be opened with the handle

in hot and cold position to prevent stagnation in the

connecting lines. Let the water run until the water

temperature is constant.

Test certificate (see page 44)

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Hansgrohe Vernis Shape 70 CoolStart Grifería. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Hansgrohe. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Hansgrohe Vernis Shape 70 CoolStart Grifería en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Hansgrohe Griferías
Más manuales de Griferías

Preguntas frecuentes sobre Hansgrohe Vernis Shape 70 CoolStart Grifería

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Hansgrohe Metris Grifería

Manual de uso

Hansgrohe MyCube M Grifería

Manual de uso

Hansgrohe Axor Massaud Grifería

Manual de uso

Hansgrohe Metris 230 Grifería

Manual de uso

Hansgrohe MySport M Grifería

Manual de uso

Hansgrohe Aquna Select M81 170 3jet sBox Grifería

Manual de uso

Hansgrohe Axor Bouroullec Grifería

Manual de uso

Hansgrohe Vernis Shape 70 Grifería

Categorias relacionadas