Manual de uso Hikoki D 13VB3 Taladradora de percusión

Manual de uso

3

English

DRILL SAFETY WARNINGS

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord.

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms

to the power requirements specifi ed on the product

nameplate.

2. Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

3. When the work area is removed from the power source,

use an extension cord of suffi cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Hold the drill and side handle securely with both hands

when using.

5. Do not wear gloves made of stuff liable to roll up such as

cotton, wool, cloth or string, etc.

6. Prior to drilling into walls, ceilings or fl oors, ensure there

are no electric cables or conduits inside.

7. Drilling

○ When drilling, start the drill slowly, and gradually

increasing speed as you drill.

○ Always apply pressure in a straight line with the bit. Use

enough pressure to keep drilling, but do not push hard

enough to stall the motor or defl ect the bit.

○ To minimize stalling or breaking through the material,

reduce pressure on drill and ease the bit through the last

part of the hole.

○ If the drill stalls, release the trigger immediately, remove

the bit from the work and start again. Do not click the

trigger on and off in an attempt to start a stalled drill. This

can damage the drill.

○ The larger the drill bit diameter, the larger the reactive

force on your arm.

Be careful not to lose control of the drill because of this

reactive force.

To maintain fi rm control, establish a good foothold, use

side handle, hold the drill tightly with both hands, and

ensure that the drill is vertical to the material being drilled.

○ Precautions on boring

The drill bit may become overheated during operation;

however, it is suffi ciently operable. Do not cool the drill

bit in water or oil.

○ Caution concerning immediately after use

Immediately after use, while it is still revolving, if the Drill

is placed on a location where considerable ground chips

and dust have accumulated, dust may occasionally be

absorbed into the drill mechanism. Always pay attention

to this undesirable possibility.

Slip clutch mechanism

This unit contains a slip clutch that causes the gears

between the motor and drill bit to slip when an excessive

load is suddenly applied. The slip clutch protects the unit

from a large violent reaction the load might cause.

CAUTION

○ If the slip clutch triggers and stops the drill bit rotation,

quickly turn off the power switch.

○ Do not operate the unit in a way that frequently triggers

the slip clutch.

8. RCD

The use of a residual current device with a rated residual

current of 30 mA or less at all times is recommended.

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

D13VB3: Drill

To reduce the risk of injury, user must read

instruction manual.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2002/96/

EC on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

V

Rated voltage

P

Power Input

n

0

No-load speed

Switching ON

Switching OFF

On / Off switch lock-on

Change rotation speed - High speed

Change rotation speed - Low speed

Clockwise rotation

Counterclockwise rotation

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package

contains the accessories listed in the below.

(1) Chuck wrench (Spec. only for keyed chuck) ................1

(2) Side handle ..................................................................1

(3) Depth gauge ................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

Boring holes in metal, wood and plastic.

0000BookD13VB3.indb30000BookD13VB3.indb3 2017/12/0116:46:422017/12/0116:46:42

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Hikoki D 13VB3 Taladradora de percusión. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Hikoki. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Hikoki D 13VB3 Taladradora de percusión en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Hikoki Taladradoras de percusión
Más manuales de Taladradoras de percusión

Preguntas frecuentes sobre Hikoki D 13VB3 Taladradora de percusión

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Hikoki DV 20VD Taladradora de percusión

Manual de uso

Hikoki DV 16V Taladradora de percusión

Manual de uso

Hikoki D 13VL Taladradora de percusión

Manual de uso

Hikoki DV 13SS Taladradora de percusión

Manual de uso

Hikoki DV 20VB2 Taladradora de percusión

Manual de uso

Hikoki DV 22V Taladradora de percusión

Manual de uso

Argentec GE716S2 Taladradora de percusión

Manual de uso

Ratio TR600NM Taladradora de percusión

Categorias relacionadas