Manual de uso Hitachi B 16RM Taladro de columna

Manual de uso

— 5 —

English

SPECIFIC SAFETY INSTRUCTIONS FOR THE

DRILL PRESS

WARNING

For your own safety, do not try to use your drill press or

plug it in until it is completely assembled and installed

according to the instructions, and until you have read and

understood this instruction manual:

1. THIS DRILL PRESS is intended for use in dry

conditions, indoor use only.

2. WEAR EYE PROTECTION. USE A face or dust mask

along with safety goggles if drilling operation is dusty.

USE ear protectors, especially during extended

periods of operation.

3. DO NOT wear gloves, neckties, or loose clothing.

4. DO NOT try to drill material too small to be securely

held.

5. ALWAYS keep hands out of the path of a drill bit.

Avoid awkward hand positions where a sudden slip

could cause your hand to move into the drill bit.

6. DO NOT install or use any drill bit that exceeds 175

mm (7") in length or extends 150 mm (6") below the

chuck jaws. They can suddenly bend outward or

break.

7. DO NOT USE wire wheels, router bits, shaper cutters,

circle (fly) cutters, or rotary planers on this drill press.

8. WHEN cutting a large piece of material, make sure it is

fully supported at the table height.

9. DO NOT perform any operation freehand. ALWAYS

hold the workpiece firmly against the table so it will

not rock or twist. Use clamps or a vise for unstable

workpieces.

10. MAKE SURE there are no nails or foreign objects in

the part of the workpiece to be drilled.

11. CLAMP THE WORKPIECE OR BRACE IT against the left

side of the column to prevent rotation. If it is too short

or the table is tilted, clamp it solidly to the table and

use the fence provided.

12. IF THE WORKPIECE overhangs the table such that it

will fall or tip if not held, clamp it to the table or

provide auxiliary support.

13. SECURE THE WORK. Use clamps or a vise to hold the

work when practical. It’s safer than using your hand

and it frees both hands to operate tool.

14. MAKE SURE all clamps and locks are firmly tightened

before drilling.

15. SECURELY LOCK THE HEAD and table support to the

column, and the table to the table support before

operating the drill press.

16. NEVER turn your drill press on before clearing the

table of all objects (tools, scraps of wood, etc.)

17. BEFORE STARTING the operation, jog the motor

switch to make sure the drill bit does not wobble or

vibrate.

18. LET THE SPINDLE REACH FULL SPEED before starting

to drill. If your drill press makes an unfamiliar noise or

if it vibrates excessively, stop immediately, turn the

drill press off and unplug. If do not restart the unit

until the problem is corrected.

19. DO NOT perform layout assembly or set up work on

the table while the drill press is in operation.

20. USE THE RECOMMENDED SPEED for any drill press

accessory and for different workpiece material. READ

THE INSTRUCTIONS that come with the accessory.

21. WHEN DRILLING large diameter holes, clamp the

workpiece firmly to the table. Otherwise, the bit may

grap and spin the workpiece at high speeds. DO NOT

USE fly cutters or multiple-part hole cutters, as they

can come apart or become unbalanced in use.

22. MAKE SURE the spindle has come to a complete stop

before touching the workpiece.

23. TO AVOID INJURY from accidental starting, always

turn the switch “OFF” and unplug the drill press

before installing or removing any accessory or

attachment or making any adjustment.

24. KEEP GUARDS IN PLACE and in working order.

25. USE ONLY THE SELF-EJECTING TYPE CHUCK KEY as

provided with the drill press.

SAVE THESE INSTRUCTIONS

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Hitachi B 16RM Taladro de columna. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Hitachi. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Hitachi B 16RM Taladro de columna en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Hitachi Taladros de columna
Más manuales de Taladros de columna

Preguntas frecuentes sobre Hitachi B 16RM Taladro de columna

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Ayerbe AY 13 TS Taladro de columna

Manual de uso

FERM TDM1025 Taladro de columna

Manual de uso

Ryobi RDP102L Taladro de columna

Manual de uso

Knova KN DP-2000 Taladro de columna

Manual de uso

Einhell TC-BD 630 Taladro de columna

Manual de uso

Einhell BT-BD 801 E Taladro de columna

Manual de uso

Dedra DED7621 Taladro de columna

Manual de uso

Craftsman 137.229151 Taladro de columna

Categorias relacionadas