Manual de uso Hitachi UC 9SD Cargador de batería

Manual de uso

4

English

CHARGING

Before using the power tool, charge the battery as follows.

1. Insert the battery into the charger.

Insert the battery into the battery charger as shown

in Figs. 1, 2, 3 and 4.

Make sure it contacts the bottom of the battery

charger.

2. Connect the charger power cord to the receptacle.

Connecting the power cord will turn on the charger

(the pilot lamp lights up).

CAUTION

If the pilot lamp does not light up, pull out the

power cord from the AC outlet and check the

battery mounting condition.

About 1 hour is required to fully charge the battery

at a temperature of about 20°C. The pilot lamp goes

off to indicate that the battery is fully charged.

CAUTION

If the battery is heated due to direct sunlight,

etc., just after operation, the charger pilot lamp

may not light. At that time cool the battery first,

then start charging.

3. Disconnect the charger power cord from the

receptacle.

4. Hold the charger tight and pull out the battery.

MAINTENANCE AND INSPECTION

1. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Fail-

ure to do so could result in serious hazard.

2. Cleaning of the charger

When the charger is stained, wipe with a soft dry

cloth or a cloth moistened with soapy water. Do

not use chloric solvents, gasoline or paint thinner,

as they melt plastics.

3. Store idle charger

When not in use, the charger should be stored in

dry, high or locked-up place–out of reach of children.

NOTE

Due to HITACHI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

IMPORTANT

Correct connection of the plug

The wires of the mains lead are coloured in accordance

with the following code:

Blue: – Neutral

Brown: – Live

As the colours of the wires in the mains lead of this tool

may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows:

The wire coloured blue must be connected to the terminal

marked with the letter N or coloured black.

The wire coloured brown must be connected to the

terminal marked with the letter L or coloured red.

Neither core must be connected to the earth terminal.

NOTE

This requirement is provided according to BRITISH

STANDARD 2769: 1984.

Therefore, the letter code and colour code may not be

applicable to other markets except United Kingdom.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Hitachi UC 9SD Cargador de batería. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Hitachi. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Hitachi UC 9SD Cargador de batería en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Hitachi Cargadores de bateria
Más manuales de Cargadores de bateria

Productos relacionados

Manual de uso

Hitachi UC14SD Cargador de batería

Manual de uso

Hitachi UC 3SML Cargador de batería

Manual de uso

Hitachi UC 14YF Cargador de batería

Manual de uso

Hitachi UC 18YMRL Cargador de batería

Manual de uso

Hitachi UC 24YJ Cargador de batería

Manual de uso

Hitachi UC 18YGH Cargador de batería

Manual de uso

Hitachi UC 18YGSL Cargador de batería

Manual de uso

Hitachi UC 18YK Cargador de batería

Categorias relacionadas