Manual de uso Honeywell HF-910 Turbo Force Ventilador

Manual de uso

USER SERVICING INSTRUCTIONS

1. Grasp plug and remove from the receptacle or other outlet device. Do not

unplug by pulling on cord.

2. If your fan loses power and you suspect that the fuse on your fan has

blown, you should first remove the spare fuse holder attached to the cord

plug (Fig. 1). Remove the spare fuse from the plastic spare fuse holder, and

set the spare fuse aside (Fig. 2).

3. You can gain access to the blown fuse by sliding open the door found on

the side of the plug. Slide the door outward until the blown fuse is fully

visible (Fig. 3).

4. Remove the blown fuse and snap the replacement fuse into place. Risk of

fire. Replace fuse only with 2.5 Amp, 125 volt fuse (provided with product).

Fully close the fuse door by sliding back into place. Discard the blown fuse.

The plug should now be ready for normal use

5. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse,

AFCI, LCDI) that should not be removed. Discard product if the attachement

plug is damaged.

6. If you need further information on how or when to replace the fuse in the

safety plug, please contact Kaz Consumer Relations Department by visiting

our website at www.kaz.com or calling 1-800-477-0457.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an

electrical fault occurs. Please see below for more information on how to properly use your fan and

replace the safety plug fuse, if needed.

FUSED SAFETY PLUG - FOR US MODELS ONLY

Fig. 1

Fig. 2

Fig. 3

15. Do not operate if the fan housing is

removed or damaged.

16. A loose fit between the AC outlet

(receptacle) and plug may cause

overheating and a distortion of the plug.

Contact a qualified electrician to replace

loose or worn outlet.

17. Do not operate any fan with a damaged

cord or plug. Discard any damaged fan,

or return the fan to the retailer where the

fan was purchased, or request a return

authorization to return to Kaz, Inc. for

examination and/or repair.

18. Do not run fan cord under carpeting. Do

not cover cord with throw rugs, runners,

or similar coverings. Do not route cord

under furniture or appliances. Arrange

cord away from traffic areas and where it

will not be tripped over.

WARNING: To Reduce The Risk of Fire

or Electric Shock, Do Not Use This Fan With

Any Solid State Speed Conrol Device

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Honeywell HF-910 Turbo Force Ventilador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Honeywell. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Honeywell HF-910 Turbo Force Ventilador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Honeywell Ventiladores
Más manuales de Ventiladores

Preguntas frecuentes sobre Honeywell HF-910 Turbo Force Ventilador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Honeywell HT-800C Ventilador

Manual de uso

Honeywell HFT-114B Ventilador

Manual de uso

Honeywell HY-013 Comfort Control Ventilador

Manual de uso

Honeywell HY-201 Febreze Freshness Ventilador

Manual de uso

Honeywell HT-700BE Ventilador

Manual de uso

Honeywell HT-216E Ventilador

Manual de uso

Honeywell HW-510 Ventilador

Manual de uso

Honeywell HFT-114BC Ventilador

Categorias relacionadas