Manual de uso Honeywell HYF023W Ventilador

Manual de uso

2 3

NOTE: Remove all contents from the box being careful not to discard

the manual and hardware needed for assembly. A phillips head screw

driver (

) is required for assembly and is not included with the fan

purchase.

A. Base Assembly

• Gently turn the fan upside down.

• Place the power cord through the recessed channel located in the

center of the rear base assembly (Fig. 1).

• Align the rear and front base assembly and firmly snap together

by pushing the 4 round extrusion into the adjacent circles of the

connecting pieces (Fig. 2).

B. Securing the Tower Fan to the Base

• Using the 3 (M5 x 12) screws and phillips head screw driver ( )

secure the base into the bottom portion of the fan housing by

aligning the 3 screw holes on the base with the 3 screw holes on

the bottom of the fan housing (Fig. 3).

• Gently pull any slack out of the power cord and place the cord

securely in the power cord

holding bracket (Fig. 4).

• Place the fan right side up.

Your fan is now ready

for use.

DYF012 SERIES ASSEMBLY INSTRUCTIONS

Fig. 3

Fig. 4

Fig. 2

Fig. 1

DYF012 SERIES OPERATION INSTRUCTIONS

• Place the fan on a level

and dry surface.

• Plug the power cord into

a polarized 120 Volt AC

wall outlet.

• To operate, press the

appropriate speed control

option: High (

),

Medium (

), or

Low (

) (Fig. 5).

• To activate or disengage the fan oscillation, press the oscillation button (

) (Fig. 6).

• To turn the fan OFF (

) press the Off button once.

Fig. 5

Fig. 6

USER SERVICING INSTRUCTIONS

• If your fan loses power and you suspect that the fuse on your fan has

blown, grasp plug and remove from the receptacle or other outlet

device. Do not unplug by pulling on cord.

• Slide fuse cover, located on the top of the plug, towards the prongs of

the plug. (Fig. 1)

• Carefully remove the blown fuse and snap a new fuse into

place. To reduce the risk of fire, replace fuse only with 2.5 Amp, 125

volt fuse. Fully close the fuse door by sliding back into place. (Fig. 2)

Discard the blown fuse. The plug should now be ready for normal use.

• To reduce the risk of fire, do not replace attached plug. Contains a

safety device (fuse) that should not be removed. Discard product if the

attached plug is damaged.

• If you need further information on how or when to replace the fuse in

the safety plug, please contact Kaz Consumer Relations Department

by visiting our website at www.honeywellpluggedin.com/fans

or calling 1-800-477-0457.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an

electrical fault occurs. Please see below for more information on how to properly use your fan and

replace the safety plug fuse, if needed.

FUSED SAFETY PLUG – FOR US MODELS ONLY

15. Do not hang or mount fan on a wall or

ceiling.

16. Do not operate if the fan housing is

damaged.

17. A loose fit between the AC outlet

(receptacle) and plug may cause over

heating and a distortion of the plug.

Contact a qualified electrician to replace

loose or worn outlet.

18. Do not operate any fan with a damaged

cord or plug. Discard any damaged fan,

return the fan to the retailer where the

fan was purchased, or request a return

authorization to return to Kaz USA, Inc. for

examination and/or repair.

19. Do not run fan cord under carpeting. Do

not cover cord with throw rugs, runners,

or similar coverings. Do not route cord

under furniture or appliances. Arrange

cord away from traffic areas and where

it will not be tripped over.

WARNING: To Reduce The Risk of Fire or

Electric Shock, Do Not Use This Fan With

Any Solid-State Speed Control Device.

Fig. 1

Fig. 2

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Honeywell HYF023W Ventilador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Honeywell. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Honeywell HYF023W Ventilador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Honeywell Ventiladores
Más manuales de Ventiladores

Preguntas frecuentes sobre Honeywell HYF023W Ventilador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Honeywell HY-048 Ventilador

Manual de uso

Honeywell HT-109E Ventilador

Manual de uso

Honeywell HT-700WBE Ventilador

Manual de uso

Honeywell HFT-114BC Ventilador

Manual de uso

Honeywell HS-120 Ventilador

Manual de uso

Honeywell HS-1040RE Ventilador

Manual de uso

Honeywell HF-910 Turbo Force Ventilador

Manual de uso

Honeywell HY-221 Febreze Freshness Ventilador

Categorias relacionadas