Manual de uso House of Marley EM-JT002 Stir It Up Giradiscos

¿Necesita un manual para su House of Marley EM-JT002 Stir It Up Giradiscos? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 1 pregunta frecuente, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.

¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.

Manual de uso

Loading…

Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide
7 8 9 10 11
PLAYING A RECORD
. Put a vinyl record on the turntable.
. Assemble the balance weight and set it to a proper
position.
. To adjust the balance weight rotate the balance
weight at counter-clock wise.
. Lift and move the tone arm to turntable. Place the
tone arm on the edge of the record.
. Turn the RPM Dial knob to select the speed according
to the record you are playing.
. The turntable platter will auto stop when the music
has ended. Lift the tone arm and place it to tone arm
rest manually.
To listen to side B, flip record and repeat the above steps.
*33 RPM speed to play corresponding size 33 vinyl disc
*45 RPM speed to play corresponding size 45 vinyl disc
To power the unit off Rotate the RPM Dial knob to the off
position.
Note:
Remove the needle cover before you balance the tone arm.
Hold tone arm whenever you make any adjustment or action
so as to protect the tone arm.
Do not try to adjust the balance weight while playing a
record as this could break the needle and scratch the record.
Re-secured the tone arm before transportation to protect
the needle.
Remove the balance weight before transportation to
prevent damage or breakage to the unit.
Do not stop or turn the platter manually. Moving or
jarring the turntable without securing the Tone arm
clamp could result in damage to the Tone arm.
ANTI-SKATING
Normally the anti-skating should be set to its minimum
setting. Anti-skate compensates for inward tracking forces
that occur with certain pick-up when the stylus nears the
center of the record. If the turntable is experiencing
excessive skipping while nearing the center spindle, try
increase the anti-skating in the increments indicated
on the dial. Start by adding an increment of 1, test its
performance, then increase it more, and so on.
Note: During adjusting the anti-skating knob, leave the
tone arm and balance weight alone to prevent damaging the
stylus (needle).
VOLUME CONTROL
Increase Volume: Rotate the Volume Knob clockwise.
Decrease Volume: Rotate Volume Knob counter clockwise.
HEADPHONE OPERATION VIA HEADPHONE JACK
Connect a set of headphone (not included) in the headphone jack.
Note: Never put on the headphone till you have plugged in
the headphone plug
USB TO PC RECORDING
Download Full instruction for the Audacity Software at:
http://www.audacityteam.org/download/
• Connect the Turntable and the computer via the provided
USB cable.
• Follow the instruction of the software installation steps
and operation interface.
BLUETOOTH® PAIRING
• Power on the external Bluetooth® device first before
turning on the BT function on the Turntable.
• Press the BT button on the turntable to turn on
Bluetooth® transmitter.
• Press button again to enable the unit to search the
Bluetooth® device till BT indicator light becomes solid.
This will indicated your devices are paired.
45
33
OFF
• Blue LED light flash
• Blue LED light stable
DISCONNECT BLUETOOTH® PAIRING
Long press and hold the BT button till the BT indicator light
turns off. Turntable will then disconnect from external device.
45
33
OFF
• Blue LED light will turn off.
VOLUME +
VOLUME -
45
33
OFF
1.
3.
5.
2.
4.
6.
POWERING ON YOUR STIR IT UP WIRELESS
• Your Stir It Up Wireless uses an AC power supply and is
powered by a standard wall outlet.
• Connect the power adaptor to the wall outlet.
SETUP
Quick Start Guide
6
45
33
OFF
A. RCA Line Out
B. Pre-Amp Switch Button
C. USB to PC Recording
D. Off// Knob
LEGEND
E. Bluetooth® Button
F. - VOL + Knob
G. Headphone Jack
H. Anti-skating Knob
A.
D. E. F.
B.
G.
C.
H.
FUNCTION LAYOUT
OUT PUT
PRE-AMP
OFF ON
Descargue el manual en Español (PDF, 0.83 MB)
(Piense en el medioambiente y solo imprima este manual si es de verdad necesario)

Loading…

Puntuación

Dé su opinión de la House of Marley EM-JT002 Stir It Up Giradiscos calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.
¿Estás satisfecho con elHouse of Marley EM-JT002 Stir It Up Giradiscos?
No
Sea el primero en calificar este producto
0 votos

Únase a la conversación sobre este producto

Aquí puedes compartir lo que piensas sobre House of Marley EM-JT002 Stir It Up Giradiscos. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus House of Marley EM-JT002 Stir It Up Giradiscos. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con House of Marley. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu House of Marley EM-JT002 Stir It Up Giradiscos en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Marca House of Marley
Modelo EM-JT002 Stir It Up
Categoría Giradiscos
Tipo de archivo PDF
Tamaño del archivo 0.83 MB

Todos los manuales para House of Marley Giradiscos
Más manuales de Giradiscos

Preguntas frecuentes sobre House of Marley EM-JT002 Stir It Up Giradiscos

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

¿Cuándo debo reemplazar la aguja de mi tocadiscos? Verificado

Depende de la aguja, pero generalmente una aguja durará entre 500 y 2000 horas, dependiendo de la calidad. Cuando compre un tocadiscos de segunda mano, siempre sustituya la aguja como medida preventiva. Si no lo hace a tiempo, se pueden producir daños en los discos.

Ha sido de gran ayuda (298) Leer más
Manual de uso House of Marley EM-JT002 Stir It Up Giradiscos

Productos relacionados

Categorias relacionadas