Manual de uso Infiniton 77MCIXG Placa

Manual de uso

gas pressure conforms to the indications given in table 1 "Nozzle and burner characteristics".

Connection to non-flexible tube

(copper or steel)

Connection to the gas source must be done in such a way as to not create any stress points at any part of

the appliance.

The appliance is fitted with an adjustable, "L" shaped connector and a gasket for the attachment to the gas

supply.

Should this connector have to be turned, the gasket must be replaced (supplied with the appliance).

The feeding connector of the gas to the appliance is threaded 1/2 gas male cylinder.

Connection to flexible steel tube

The gas feed connector to the appliance is a threaded, male 1/2" connector for round gas pipe. Only use

pipes and sealing gaskets that that conform to the standards currently in force. The maximum length of the

flexible pipes must not exceed 2000 mm. Once the connection has been

made,ensure that the flexible metal tube does not touch any moving parts and is not crushed.

Check the Seal

Once the appliance has been installed, make sure all the connections are properly sealed, using a soapy

water solution. Never use a flame.

Electrical Connection

The cooktops fitted with a tripolar electrical supply cord are designed to be be used with alternating current

according to the indications on the rating plate located under the cooktop. The earthing wire can be identified

by its yellow-green colour.

In the case of installation over a built-in electric oven, the electrical connections for the cooktop and oven

should be independent, not only for safety purposes, but also to facilitate removal of one or both in the future.

Electrical Connection for Gas Cooktop

Fit the supply cord with a standard plug for the demand rate indicated on the rating plate or connect it directly

to the electrical mains. In the latter case, a single pole switch must be placed between the appliance and the

mains, with a minimum opening between the contacts of 3 mm in

compliance with current safety codes (the earthing wire must not be interrupted by the switch). The power

supply cord must be positioned so that it does not reach a temperature in excess of 50~C above room

temperature at any point.

Before actual connection make sure that:

● The fuse and electrical system can withstand the load required by the appliance;

● That the electrical supply system is equipped with an efficient earth hook-up according to the norms and

regulations prescribed by law;

● That the plug or switch are easily accessible.

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows: Connect the Green & Yellow wire to terminal marked "E"

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Infiniton 77MCIXG Placa. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Infiniton. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Infiniton 77MCIXG Placa en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Infiniton Placas
Más manuales de Placas

Preguntas frecuentes sobre Infiniton 77MCIXG Placa

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Infiniton IND3WH8G32 Placa

Manual de uso

Infiniton GG-332 Placa

Manual de uso

Infiniton GAS419H Placa

Manual de uso

Infiniton IND-932WH Placa

Manual de uso

Infiniton IND-320B Placa

Manual de uso

Infiniton VIT4T23 Placa

Manual de uso

Infiniton IND-4TBM Placa

Manual de uso

Infiniton GAS-IX02 Placa

Categorias relacionadas