Manual de uso Infiniton 77MCIXG Placa

Manual de uso

NOTICE

The stainless steel grease pan and the cast-iron grill, located in the burner and grate packing box, must be

installed, respectively, below and above the electric heating element so that tile element is enclosed between

the two.

The product complies with COMMISSION REGULATION (EU) No 66/2014. In terms of the calculation

formula, please refers to the directive. The testing method is performed based on the directive EN 30-2-1：

1998+A1：2003+A2:2005 (If it is regulated by the government, the relevant testing method would be done

accordingly). Please refer to the product label for the detail concerning the testing figures

In order to reduce the unnecessary waste and control the impact by the combustion, please save the energy

and adjust the gas consumption according to the necessity.

The specialized technician should avoid any damage and deformation of every component when he repair

s the product. The change of relevant components must be done by the authorized technician under the g

uidelines by the manufacturers and distributors. This is a necessary way to avoid the working efficiency im

pacted.

How To Use Your Appliance

The position of the corresponding gas burner or electric hot plate (if present) is indicated on each control

knob.

Gas Burners

The burners differ in size and power. Choose the most appropriate one for the diameter of the cookware

being used.

The burner can be regulated with the corresonding control knob by using one of tile following settings:

OFF

High

Low

To turn on one of the burners, place a lighted match or lighter near the burner, press the knob all the

way in and turn in the counter-clockwise direction to the "High" setting.

On those models fitted with a safety device (F), the knob must be pressed in for about 6

seconds ,until the device that keeps the flame lighted warms up.

On those models fitted with an ignitor (D), the "E" ignition button, identified by the symbol, must

first be pressed and then the corresponding knob pushed all the way in and turned in the counter-clockwise

direction to the "High"setting.

Some models are equipped with an ignition switch incorporated into the control knob. If this is the case, the

ignitor (D) is present, but not the "E" switch (the symbol is located near each knob).

To light a burner, simply press the corresponding knob all the way in and, then, turn it in the counter-clockwise

direction to the High setting, keeping it pressed in until the burner lights.

Caution: If the burner accidently goes out, turn off the gas with the control knob and try to light it again

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Infiniton 77MCIXG Placa. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Infiniton. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Infiniton 77MCIXG Placa en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Infiniton Placas
Más manuales de Placas

Preguntas frecuentes sobre Infiniton 77MCIXG Placa

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Infiniton VIT3P54W Placa

Manual de uso

Infiniton GG-320 Placa

Manual de uso

Infiniton IND-320B Placa

Manual de uso

Infiniton IND-932WH Placa

Manual de uso

Infiniton GAS-CR2B Placa

Manual de uso

Infiniton GAS-320WB Placa

Manual de uso

Infiniton VIT2FBN Placa

Manual de uso

Infiniton IND-3TPA Placa

Categorias relacionadas