Manual de uso Infiniton 77MCIXG Placa

Manual de uso

with a safety device to prevent the flame from accidentally going out must have a ventilation opening

twice the size otherwise required, i.e. a minimum of 200 cm² (Fig. 3). Otherwise, the room can be vented

indirectly through adjacent rooms fitted with ventilation ducts to the outside as described above, as long

as the adjacent rooms are not shared areas, bedrooms or present the risk of fire (Fig. 4).

Detail A Adjacent Room Room to be Vented

Examples of ventilation holes for comburant air. Enlarging the ventilation slot between window and floor

Fig.3 Fig.4

c) Intensive and prolonged use of the appliance may necessitate supplemental ventilation, e.g. opening a

Window or increasing the power of the air intake system (if present).

d) Liquidified petroleum gases are heavier than air and, as a result, settle downwards. Rooms in which

LPG tanks are installed must be fitted with ventilation openings to the outside in order to allow the gas

to escape in the event of a leak. Therefore, LPG tanks, whether empty or partially full, must not be

installed or stored in rooms or spaces below ground level'(cellars, ect.). It is also a good idea to keep

only the tank currently being used in the room, making sure that it is not near sources of heat (ovens,

fireplaces, stoves, etc.) that could raise the internal temperature of the tank above 50ºC.

Installation of built-in stove tops

The gas hobs are prepared with protection degree against excessive heating of type X, the appliance can

therefore be installed next to cabinets, provided the height does not exceed that of the hob. For a correct

installation of the cooking hob the following precautions must be followed:

a) The hob may be located in a kitchen, a kitonen/diner or bed sitting room, but not in a bathroom or shower

room.

b) The furniture standing next to the unit, that is highe1 than the working boards, must be placed at least

110mm from the edge of the board.

c) The cabinets should be positioned next to the hood at a height of at least 420 mm (Fig. 5).

Fig.5

d) Should the hob be install-ed directly under a cupboard the letter should be at least 700mm (millimetres)

from the worktop, as shown in Fig. C.

e) The dimensions of the room for the furniture must those indicated in the figures in the last two pages the

cover. Fixing hooks are provided which allow place the hob plate on work tops that measure 20 to 40 mm

in thickness (see Fig. 6).To obtain a of the hob plate it is advisable to use all the fixing supplied.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Infiniton 77MCIXG Placa. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Infiniton. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Infiniton 77MCIXG Placa en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Infiniton Placas
Más manuales de Placas

Preguntas frecuentes sobre Infiniton 77MCIXG Placa

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Infiniton IND3WH8G32 Placa

Manual de uso

Infiniton GG-332 Placa

Manual de uso

Infiniton GAS419H Placa

Manual de uso

Infiniton IND-932WH Placa

Manual de uso

Infiniton IND-320B Placa

Manual de uso

Infiniton VIT4T23 Placa

Manual de uso

Infiniton IND-4TBM Placa

Manual de uso

Infiniton GAS-IX02 Placa

Categorias relacionadas