Manual de uso ION Quick Play Flash Giradiscos

Manual de uso

4

HOW TO PLAYBACK FROM A FLASH DRIVE

1. Connect a USB flash drive with MP3 to the turntable’s front USB port.

2. If the light next to the

f / /  button is lit solid green, proceed to Step 3. If it is lit red, press the Mode button

once.

3. Press

f / / ; the first song will play.

Note: Songs will play in alphabetical order by file name within each folder on the drive. QUICK PLAY FLASH

will scan through the drive’s folders/subfolders for playable music files in the following order: (1) songs recorded

by the turntable that are located in the MUSIC X _ION folder. (2) songs in the root directory (3) songs in other

folders/subfolders (including any hidden or .Trash folders)

4. Press |<< or >>| to skip to the previous/next song.

HOW TO ACCESS FLASH DRIVE RECORDED MUSIC ON YOUR COMPUTER

1. Connect the USB flash drive to a free USB port on your computer (preferably one on the rear panel of your

computer).

2. On a PC, your flash drive can be accessed by opening the My Computer icon on your desktop (this is called

‘Computer’ in Windows Vista and Windows 7). On a Mac, the USB flash drive icon will appear on your desktop.

3. Select your USB flash drive from the list of drives in My Computer (PC) or on your desktop (Mac) and double

click to open the drive.

4. The files that you recorded using the QUICK PLAY FLASH can be found in the MUSIC X _ION folder and will

be titled "Rec001.MP3”, "Rec002.MP3, etc. You can then select your songs and drag them to a folder on your

computer. Then use your favorite MP3 music player software to play back the songs.

5. After you have transferred your songs, to safely remove the USB drive, right-click on the drive icon in the

System Tray and select the option to “safely remove” the drive (PC), or right-click (Ctrl+click) on the drive icon

on the desktop and select ‘Eject’ (Mac). Once the drive has been ejected, you can remove the USB flash drive

from the computer’s USB port.

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

I am not hearing any

audio when I am

recording.

Needle is not on the record. Place the needle on the record.

Cartridge connection is not

secure.

Cartridge must be securely connected to the tonearm

whenever you are using the turntable.

I am experiencing poor

sound quality.

Vinyl record is dirty or

scratched.

Try dusting off and gently wiping the surface of the record

before playing it.

When recording into my

computer on Windows

Vista, my recordings are

mono instead of stereo.

Recording input properties in

Vista not set to “stereo”.

In Vista, you may need to manually specify “stereo” for the

recording input.

Go to Start X Control Panel X Sound (in Classic View).

Then, click on the Recording tab and highlight the

Microphone input (USB Audio Codec). Click on

Properties to bring up the input settings. Next, click on the

Advanced tab and select “2 channel, 16 bit, 44100 Hz (CD

quality)” in the Default Format pull-down menu. Lastly, click

Apply to accept the settings.

My music is playing at a

strange pitch.

Incorrect speed selected on

the turntable.

Make sure that you are playing your records at the speed

they were intended to be played. Select between the

different speeds (33, 45, or 78 RPM).

When recording into my

computer on Windows 7,

my recordings are

distorted.

The Windows 7 Sound

Panel> Levels setting is

turned up too high

Go to Start X Control Panel X Sound (in Classic View).

Then click on the Recording tab and highlight the

Microphone input (USB Audio Codec). Click on

Properties to bring up the input settings. Next, click on the

Advanced tab and select “2 channel, 16 bit, 44100 Hz (CD

quality)”

Uncheck the two boxes in Exclusive Mode and click Apply.

Select the Levels tab and set the level slider to ‘4’. Then

click Apply and Ok.

My record stopped

playing before the end of

the song.

If you are playing a 45RPM

record, the Autostop feature

may have detected that the

tonearm is close enough to

the center to stop the record.

Set the Autostop Switch to "off."

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus ION Quick Play Flash Giradiscos. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con ION. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu ION Quick Play Flash Giradiscos en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para ION Giradiscos
Más manuales de Giradiscos

Preguntas frecuentes sobre ION Quick Play Flash Giradiscos

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

ION Vertical Vinyl Giradiscos

Manual de uso

ION CD Direct Giradiscos

Manual de uso

ION Duo Deck Giradiscos

Manual de uso

ION Select LP Giradiscos

Manual de uso

ION Archive LP Giradiscos

Manual de uso

ION LP 2 Go Giradiscos

Manual de uso

ION iProfile Giradiscos

Manual de uso

ION TTUSB Giradiscos

Categorias relacionadas