Manual de uso Klip Xtreme KLS-670 ZounDtastic Altavoz

Manual de uso

VI. Advanced operation

Pairing the speaker with wireless devices

VII. Troubleshooting

3. FM radio mode

4. How to use the recording feature

1. Press the MODE button briefly to toggle through the available audio sources and select FM.

2. Press the PLAY/PAUSE button to start scanning for radio stations automatically, in the frequency range

between 87.5 and 108.0MHz.

3. Once the search is complete, the unit will save active stations automatically.

4. Use the and to select stored stations.

1. First, make sure to have a microphone connected to the MIC input, or the wireless Microphone is enabled.

2. Insert a compatible USB or memory card into the corresponding port, and press the MODE button to

select USB/SD

TM

.

3. If the USB/SD

TM

card is plugged into the speaker for the first time, this will automatically create a folder

named RECORD to save the files.

4. When you are ready, press the REC button to enable recording. The current sound output will stop, and

the Recording mode will be activated.

5. The device starts recording once the screen displays the timer. Press once more when you wish to stop.

6. To discard a recording, first go to REC Play Mode. Select the recording you wish to eliminate followed by

Delete.

Note: Before installing this product, please make sure your device is compatible with Bluetooth®.

1. Enable the Bluetooth® feature on the selected source and set it to discover the wireless speaker.

2. Place your wireless device and the speaker not more than one meter away from each other.

3. Next, cycle to the Bluetooth® feature on the speaker by pressing the MODE button found on the media

panel and select it as the input source. The BT symbol blinks fast on the display to indicate that the

speaker has entered into the pairing mode.

4. Once the speaker appears listed (KLS-670) under the newly found Bluetooth® devices of your wireless

device, it will ask if you want to pair with it.

5. Accept by pressing Yes or Ok. If you have a lower Bluetooth® version, you may be prompted to enter

the passkey 0000 (4 zeros).

6. When pairing is successful, the BT symbol stops blinking indicating that the wireless connection has been

established. If after 60 seconds the pairing process fails, please repeat steps 1 through 5 described above.

7. You can now start streaming audio through the speaker wirelessly from your favorite Bluetooth®- enabled

devices.

8. The speaker will re-pair automatically to the memorized device when the BT mode is selected on the

unit after being turn off and on again.

Technical specifications

Device

MPN KLS-670

Speaker

Microphone

Maximum Power Output (PMPO)

Reference RMS power

AC input

Buttons

Subwoofer

Driver unit

Reference RMS power

Frequency

Impedance

Sensitivity

Signal to noise ratio

Total Harmonic Distortion (THD)

Tweeter

Driver unit

Reference RMS power

Frequency

Impedance

Sensitivity

Signal to noise ratio

Total Harmonic Distortion (THD)

Microphone

Connectivity

Directivity

Frequency

Impedance

Sensitivity

Connectivity

Connection type

Memory card slot

1200W

120W

100V-240V (±10%) 60/50Hz (autosensing)

REC, Treble, Bass, GT VOL, ECHO, Play/Pause, Previous,

Next, VOL, Mode, Standby, Light SW, Power

Two 8in (45W each)

90W (45W each)

20Hz-8kHz

3Ω±10%

88dB±2dB

≥70dB

1kHz, 0dB (±10%)

Two 3in (15W each) at 4Ω

30W (15W each )

40Hz -20KHz

4Ω, ±15 %

85dB ± 3dB

≥70dB

1kHz, 0dB（±10%）

Wired and wireless

Unidirectional

40Hz-15kHz

10KΩ

5dB

Bluetooth

®

compatible

USB/SD

TM

Status Possible cause Solution

The display fails to

turn on

No sound

Distorted sound

The speaker is not connected properly

Power switch not on

Volume adjusted at the lowest level

Wrong input mode selected

Incorrect speaker connection.

Master volume is too high

The speaker is damaged

Decrease the master volume

Check or replace the speaker

Check the connection and plug in the AC adapter

Turn on the power switch

Adjust the volume to a comfortable listening level

Choose the playback mode based on the

external source being used

Check all connections and try again

Type All-in-one loudspeaker system

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Klip Xtreme KLS-670 ZounDtastic Altavoz. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Klip Xtreme. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Klip Xtreme KLS-670 ZounDtastic Altavoz en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Klip Xtreme Altavoces
Más manuales de Altavoces

Preguntas frecuentes sobre Klip Xtreme KLS-670 ZounDtastic Altavoz

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Klip Xtreme KWS-711 Rubic Altavoz

Manual de uso

Klip Xtreme KWS-612m MiniKromatik Altavoz

Manual de uso

Klip Xtreme KCS-500 Link360 Altavoz

Manual de uso

Klip Xtreme KSS-310 StereoBytes Altavoz

Manual de uso

Klip Xtreme KWS-751 Mirage Altavoz

Manual de uso

Klip Xtreme KLS-640 ZounDtastic mini Altavoz

Manual de uso

Klip Xtreme KFS-500 Forte Altavoz

Manual de uso

Klip Xtreme KWS-651 BluPulse Altavoz

Categorias relacionadas