Home > Audio, TV & Foto > Docking station > Klipsch Docking station > Klipsch iGroove Docking station

Manual de uso Klipsch iGroove Docking station

¿Necesita un manual para su Klipsch iGroove Docking station? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 0 preguntas frecuentes, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.

¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.

Manual de uso

The iGroove is intelligently designed to easily accommodate all

iPods. To configure the iGroove for your specific iPod size, simply

adjust the movable back-rest, as shown below, to the proper

loca

tion based on the size of your iPod.

When using an iPod Mini or Nano, it will be necessary to place

the dock insert into the dock area as shown below. Now you are

ready to dock your iPod. While your iPod is docked, its battery is

charging (until it is fully charged).

Over time, it may become necessary to tighten the moveable

back rest. To do this, remove the rubber pad and tighten the

screw as shown below. Replace the rubber pad after the screw

is tightened.

SYSTEM OPERATION

The Dock

Your iGroove system is ready to perform as soon as you plug it in

and dock an iPod. The Power button located on the right of the

iGroove will light up “Red” in “Standby/Off” mode and “Green” in

“On” mode. The buttons on the left of the iGroove are volume up

and down.

Note:When the iPod is docked and the headphone mini-jack on

the iPod is used, sound will come from the heaphones as well as

the iGroove. The iPod’s volume will control the headphone level

only. The iPod’s volume will have no effect on the volume of

the iGroove.

The Remote

The wireless remote control allows interaction with the iGroove

as well as the iPod.

Note: This remote must be pointed at the iGroove in order to

guarantee proper interaction.

• Power – Press to turn the iGroove “On”; press again to put

the iGroove in “Standby/Off.”

•

Play/Pause – Press once to “Pause” play; press again to

resume play. Press and hold to turn the iPod “Off” (the iPod

will continue to charge).

•

Track Selection – Press and to move to the previous or

next track; press and hold to reverse or fast-forward through

the current track.

• Volume – Press + or – to decrease or increase the system

volume level.

Changing the Remote Control Battery

The remote battery will need to be changed when it

stops working or when its performance is noticeably reduced.

To remove the battery, simply pull the battery housing tab from

the remote control (as shown in the diagram) and remove the

battery. Replace only with a 3-volt CR2025 lithium battery.

Note: Lighting and other room conditions can reduce remote

perf

ormance.

Puntuación

Dé su opinión de la Klipsch iGroove Docking station calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.

¿Estás satisfecho con elKlipsch iGroove Docking station?
Sí No

Sea el primero en calificar este producto

0 votos

Únase a la conversación sobre este producto

Aquí puedes compartir lo que piensas sobre Klipsch iGroove Docking station. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Klipsch iGroove Docking station. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Klipsch. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Klipsch iGroove Docking station en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.