Manual de uso Lotus 15052 Reloj de pulsera

Manual de uso

ILM0S60

ENGLISH

I

INSTRUCTION MANUAL

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

1. Pull the crown out to the 2nd position.

2. Turn the crown to set hour and minute hands.

3. When the crown is pushed back to the normal position, small second hand begins to run.

C) SETTING THE DATE

1. Pull the crown out to the 1st position

2. Turn the crown counter-clockwise to set the date.

* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.

3. After the date has been set, push the crown back to the normal position.

D) USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/20 second timing up to maxinum of 11 hours 59 minutes 59

seconds 95.

Measuring time with the chronograph

1. Press button “B” to change the watch to the chroonograph mode.

The second hand stops at zero position, and changes to the chronograph 1/20 second hand.

2. The chronograph can be started and stopped each time button “A” is pressed.

The chronograph 1/20 second hand stops at zero position 30 seconds after starting .When button “A” is pressed to stop

the chronograph, the chronograph 1/20 second hand advances rapidly to display the measured time.

3. Pressing button “B” resets the chronograph and all chronograph hands return to zero position.

E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

This procedure shoud be performed when the chronograph second hand and the chronograph 1/20 second hand do not

return to zero position after the chronograph has been reset, and including after the battery has been replaced.

1. Pull the crown out to the 2nd position.

2. Press button “A” to set the chronograph second hand to zero position

3. Press button “B” to set the chronograph 1/20 second hand to zero position.

The chronograph hand can be advanced rapidly by continuously pressing button “A” or “B”.

4. Once the hand have been zeroed, return the crown to the normal position.

5. Press button “B” to check that the chronograph hands are reset to zero position.

* Do not push the crown to the normal position while the chronograph second hand and the chronograph 1/20 second hand

return to zero postion. Each hands stop on the way when crown are returned to normal position and these positions are

recognized as zero position.

Hour hand

Small Second hand or Chronograph 1/20 second hand

Button B

Button A

Minute hand

1st position

2nd position

Normal crown position

Calendar

Chronograph

hour hand

Chronograph

minute hand

Chronograph

second hand

"A"

RESET

"A"

TIME MEASUREMENT STOP

"B "

"A"

"B"

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Lotus 15052 Reloj de pulsera. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Lotus. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Lotus 15052 Reloj de pulsera en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Lotus Relojes de pulsera
Más manuales de Relojes de pulsera

Preguntas frecuentes sobre Lotus 15052 Reloj de pulsera

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Lotus 18705 Chrono Reloj de pulsera

Manual de uso

Lotus 15273 Reloj de pulsera

Manual de uso

Lotus 15683 Reloj de pulsera

Manual de uso

Lotus 10114 Reloj de pulsera

Manual de uso

Lotus 15334 Reloj de pulsera

Manual de uso

Lotus 18687 Chrono Reloj de pulsera

Manual de uso

Lotus 18690 Chrono Reloj de pulsera

Manual de uso

Lotus 18352 Reloj de pulsera

Categorias relacionadas