Manual de uso Makita 6827 Atornillador

Manual de uso

4

ENGLISH (Original instructions)

Explanation of general view

1 Pointer

2 Locator

3 Front cap

4 Adjusting ring

5 Switch trigger

6 Lock button

7 Reversing switch lever

8 Hook

SPECIFICATIONS

Model 6827

Capacities

Self drilling screw .................................................6 mm

Machine screw .....................................................8 mm

Wood screw .......................................................6.2 mm

No load speed (min

–1

) ...................................... 0 – 2,500

Overall length ..................................................... 304 mm

Net weight ............................................................. 1.8 kg

Safety class............................................................ /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

SCREWDRIVER SAFETY WARNINGS

GEB017-4

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the fas-

tener may contact hidden wiring or its own cord.

Fasteners contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Depth adjustment (Fig.1, 2 & 3)

When you wish to drive self drilling screws, etc., adjust

the depth as follows. Turn the locator to adjust the depth.

Initially, adjust the locator to create a distance of approxi-

mately 1 mm from the tip of the front cap (which works in

conjunction with the locator) to the base of the screw

head. One full turn of the locator equals 1 mm change in

depth.

After adjusting the locator, turn the adjusting ring so that

the 6" mark is aligned with the pointer on the gear hous-

ing. Drive a trial screw into your material or a piece of

duplicate material. If the depth is not suitable for the

screw, continue adjusting until the proper depth setting is

obtained.

Switch action (Fig. 4)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

NOTE:

• Even with the switch on and motor running, the bit will

not rotate until you fit the point of the bit in the screw

head and apply forward pressure to engage the clutch.

Reversing switch action (Fig. 5)

CAUTION:

• Always check the direction of rotation before operation.

• Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation

before the tool stops may damage the tool.

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to

the

D position (A side) for clockwise rotation or the

E position (B side) for counterclockwise rotation.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Makita 6827 Atornillador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Makita. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Makita 6827 Atornillador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Makita Atornilladores
Más manuales de Atornilladores

Preguntas frecuentes sobre Makita 6827 Atornillador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Makita DFT045F Atornillador

Manual de uso

Makita FS2200 Atornillador

Manual de uso

Makita DFS451 Atornillador

Manual de uso

Makita BFT083F Atornillador

Manual de uso

Makita BFR750 Atornillador

Manual de uso

Makita BFL200F Atornillador

Manual de uso

Makita DFT087F Atornillador

Manual de uso

Makita DFL126F Atornillador

Categorias relacionadas