Manual de uso Makita BJR240 Sierra de sable

Manual de uso

5

3. Avoid cutting nails. Inspect workpiece for any

nails and remove them before operation.

4. Do not cut oversize workpiece.

5. Check for the proper clearance beyond the work-

piece before cutting so that the blade will not

strike the floor, workbench, etc.

6. Hold the tool firmly.

7. Make sure the blade is not contacting the work-

piece before the switch is turned on.

8. Keep hands away from moving parts.

9. Always switch off and wait for the blade to come

to a complete stop before removing the blade

from the workpiece.

10. Do not touch the blade or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing battery cartridge (Fig. 1)

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, withdraw it from the

tool while sliding the button on the side of the cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If you can see the red part on

the upper side of the button, it is not locked completely.

Insert it fully until the red part cannot be seen. If not, it

may accidentally fall out of the tool, causing injury to

you or someone around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Charging (Fig. 2)

1. Plug the battery charger into your power source. Two charging lights will flash in green color repeatedly.

2. Insert the battery cartridge into charger until it stops adjusting to the guide of charger. Terminal cover of charger

can be opened with inserting and closed with pulling out the battery cartridge.

3. When the battery cartridge is inserted, the charging light color will change from green to red and charging will

begin. The charging light will keep lighting up lit steadily during charging. One red charging light indicates charged

condition in 0 – 80% and two red ones indicates 80 – 100%.

4. With finish of charge, the charging lights will change from two red ones to two green ones.

5. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch into its

‘‘trickle charge (maintenance charge)’’ mode which will last approximately 24 hours.

6. After charging, unplug the charger from the power source.

NOTE:

• The battery charger is for charging Makita-battery cartridge. Never use it for other purposes or for other manufac-

turer’s batteries.

• When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it

may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the bat-

tery cartridge fully after discharging it completely and recharging a couple of times.

• If you charge a battery cartridge from a just-operated tool or battery cartridge which has been left in a location

exposed to direct sunlight for a long time, the charging light may flash in red color. If this occurs, wait for a while.

Charging will begin after the battery cartridge is cooled by the cooling fan installed in the charger. When the temper-

ature on battery is more than approx. 70°C, two charging lights may flash in red color, and when approx. 50°C –

70°C, one charging light in red color.

• If the charging light flashes alternately in green and red color, charging is not possible. The terminals on the charger

or battery cartridge are clogged with dust or the battery cartridge is worn out or damaged.

Cooling system

• This charger is equipped with cooling fan for heated battery in order to enable the battery to prove its own perfor-

mance. Sound of cooling air comes out during cooling, which means no trouble on the charger.

• Yellow light will flash for warning in the following cases.

– Trouble on cooling fan

– Incomplete cool down of battery, such as, being clogged with dust

The battery can be charged in spite of the yellow warning light. But the charging time will be longer than usual in this

case.

• Check the sound of cooling fan, vent on the charger and battery, which can be sometime clogged with dust.

• The cooling system is in order although no sound of cooling fan comes out, if the yellow warning light will not flash.

• Always keep clean the vent on charger and battery for cooling.

• The products should be sent to repair or maintenance, if the yellow warning light will frequently flash.

Battery type Capacity (mAh) Number of cells Charging time

B2417 1700 20 approx. 30 minutes

B2430 3000 20 approx. 60 minutes

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Makita BJR240 Sierra de sable. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Makita. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Makita BJR240 Sierra de sable en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Makita Sierras de sable
Más manuales de Sierras de sable

Preguntas frecuentes sobre Makita BJR240 Sierra de sable

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Makita DJR181Z Sierra de sable

Manual de uso

Makita BJR181 Sierra de sable

Manual de uso

Makita DJR145 Sierra de sable

Manual de uso

Makita JR3000VT Sierra de sable

Manual de uso

Makita BJR141 Sierra de sable

Manual de uso

Makita DJR143 Sierra de sable

Manual de uso

Makita JR180D Sierra de sable

Manual de uso

Makita JR3030T Sierra de sable

Categorias relacionadas