Manual de uso Makita HP2050F Taladradora de percusión

Manual de uso

2

ENGLISH

SPECIFICATIONS

Model HP2050/2050F HP2051F

Speed High Low High Low

Concrete 20 mm (3/4") ----- 20 mm (3/4") -----

Steel 8 mm (5/16") 13 mm (1/2") 8 mm (5/16") 13 mm (1/2")

Capacities

Wood

25 mm (1") 40 mm (1-9/16") 25 mm (1") 40 mm (1-9/16")

No load speed (RPM)

0 - 2,900/min. 0 - 1,200/min. 0 - 2,900/min. 0 - 1,200/min.

Blows per minute 0 - 58,000 0 - 24,000 0 - 58,000 0 - 24,000

Overall length 362 mm (14-1/4") 360 mm (14-1/8")

Net weight 2.5 kg (5.6 lbs) 2.5 kg (5.6 lbs)

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

USA002-2

GENERAL SAFETY RULES

(For All Tools)

WARNING! Read and understand all instructions.

Failure to follow all instructions listed below, may result

in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS.

Work Area

1. Keep your work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

Electrical Safety

4. Double insulated tools are equipped with a

polarized plug ( one blade is wider than the

other.) This plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install a

polarized outlet. Do not change the plug in any

way. Double insulation

eliminates the need for

the three wire grounded power cord and grounded

power supply system.

5. Avoid body contact with grounded surfaces

such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord to

carry the tools or pull the plug from an outlet.

Keep cord away from heat, oil, sharp edges or

moving parts. Replace damaged cords

immediately. Damaged cords increase the risk of

electric shock.

8. When operating a power tool outside, use an

outdoor extension cord marked "W-A" or "W".

These cords are rated for outdoor use and reduce

the risk of electric shock.

Personal Safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

10. Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair,

clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair can be caught

in moving parts.

11. Avoid accidental starting. Be sure switch is off

before plugging in. Carrying tools with your

finger on the switch or plugging in tools that have

the switch on invites accidents.

12. Remove adjusting keys or wrenches before

turning the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in

personal injury.

13. Do not overreach. Keep proper footing and

balance at all times. Proper footing and balance

enables better control of the tool in unexpected

situations.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Makita HP2050F Taladradora de percusión. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Makita. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Makita HP2050F Taladradora de percusión en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Makita Taladradoras de percusión
Más manuales de Taladradoras de percusión

Preguntas frecuentes sobre Makita HP2050F Taladradora de percusión

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Makita 8271D Taladradora de percusión

Manual de uso

Makita 8434D Taladradora de percusión

Manual de uso

Makita BHP446 Taladradora de percusión

Manual de uso

Makita HP2070F Taladradora de percusión

Manual de uso

Makita HP2033 Taladradora de percusión

Manual de uso

Makita BGP446 Taladradora de percusión

Manual de uso

Makita BHP452 Taladradora de percusión

Manual de uso

Makita HP1640F Taladradora de percusión

Categorias relacionadas