
11 ENGLISH
11.
-
13.
14.
-
15. -
16.
-
18.
CAUTION:
charger.
1.
-
3. -
4.
5.
ASSEMBLY
CAUTION:
Align the triangle mark on the end nozzle with the trian-
gle mark on the front pipe, then attach the end nozzle
to the front pipe, and then turn the end nozzle to lock it
into place.
Install the end nozzle so that the tip of the nozzle faces
can install the end nozzle so that the tip of the nozzle is
facing up.
Triangle mark
To remove the end nozzle, perform the installation
procedure in reverse.
NOTE:
Optional accessory
Align the groove on the adapter pipe with the pro-
trusion on the front pipe, then attach the adapter pipe to
the front pipe, and then turn it to lock it into place.
Adapter pipe
nozzle with the protrusion on the adapter pipe, then
pipe, and then turn it to lock it into place.
Adapter
pipe
Optional accessory
Align the groove on the adapter pipe with the pro-
trusion on the front pipe, then attach the adapter pipe to
the front pipe, and then turn it to lock it into place.
Insert the adapter pipe as far as it will go so that the
pipe.
Screw Hose clamp Adapter pipe
Loosen the screws on the hose clamps, and pass
the large hose clamp through the adapter pipe, and
then pass the small hose clamp.
Connect the extension pipe to the adapter pipe.
Align the groove on the extension pipe with the protru-
sion on the adapter pipe, and then slide the extension
pipe along its groove so that the triangle markings face
each other.
Adapter pipe
Únase a la conversación sobre este producto
Aquí puedes compartir lo que piensas sobre Makita UB001GT101 Soplador de hojas. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.