Manual de uso Maktec MT814 Taladradora de percusión

Manual de uso

3

ENGLISH (Original instructions)

Explanation of general view

1Grip base

2 Teeth

3 Side grip (auxiliary handle)

4Protrusion

5 Loosen

6Tighten

7 Drill chuck

8 Chuck key

9Sleeve

10 Ring

11 Side grip

12 Depth gauge

13 Switch trigger

14 Lock button

15 Reversing switch lever

16 Action mode changing lever

SPECIFICATIONS

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB003-5

HAMMER DRILL SAFETY WARNINGS

1. Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

4. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

5. Hold the tool firmly with both hands.

6. Keep hands away from rotating parts.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

9. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation and

skin contact. Follow material supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

ASSEMBLY

Installing side grip (auxiliary handle) (Fig. 1)

CAUTION:

• Always be sure that the tool is switched off and

unplugged before installing or removing the side grip.

Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then tighten

the grip by turning clockwise at the desired position. It

may be swung 360° so as to be secured at any position.

Model MT814 MT815

Capacities

Concrete 16 mm

Wood 30 mm

Steel 13 mm

No load speed (min

–1

)0–3,200

Blows per minute 0 – 48,000

Overall length 296 mm 295 mm

Net weight 2.1 kg 2.0 kg

Safety class

a/II

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Maktec MT814 Taladradora de percusión. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Maktec. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Maktec MT814 Taladradora de percusión en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Maktec Taladradoras de percusión
Más manuales de Taladradoras de percusión

Preguntas frecuentes sobre Maktec MT814 Taladradora de percusión

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Maktec MT081 Taladradora de percusión

Manual de uso

Maktec MT080 Taladradora de percusión

Manual de uso

Maktec MT815 Taladradora de percusión

Manual de uso

DeWalt DWD220 Taladradora de percusión

Manual de uso

Einhell TC-ID 710E Taladradora de percusión

Manual de uso

Metabo SBE 705 Taladradora de percusión

Manual de uso

DeWalt DW245 Taladradora de percusión

Manual de uso

Metabo SBE 85 Taladradora de percusión

Categorias relacionadas