Manual de uso Metabo BS 18 LTX BL Q I Atornillador taladrador

Manual de uso

ENGLISHen

12

Original instructions

We declare and accept sole responsibility for

ensuring: these cordless drills/screwdrivers and

cordless hammer drills identified by their type and

serial number *1) conform to all relevant provisions

of the directives *2) and standards *3). Technical

documents at *4) - Fig. J+K.

For UK only:

We as manufacturer and authorized person to

compile the technical file, see *4)

Fig. J+K., hereby declare under sole

responsibility that these battery-powered drilling

screwdrivers and impact drills, identified by type

and serial number *1) on page 3, fulfill all relevant

provisions of following UK Regulations S.I. 2016/

1091, S.I. 2008/1597, S.I. 2012/3032 and

Designated Standards ...LTX BL...: EN 62841-

1:2015, EN 62841-2-1:2018, EN 62841-2-2:2014,

EN IEC 63000:2018

*3) ...LTX-3 BL...: *3) EN 60745-1:2009+A11:2010,

EN 60745-2-1:2010, EN 60745-2-2:2010, EN IEC

63000:2018.

The cordless drills/screwdrivers and cordless

hammer drills are suitable for drilling without impact

in metal, wood, plastic and similar materials as well

as for screwdriving and thread tapping.

The cordless hammer drills are also suitable for

impact drilling in masonry, brickwork and stone.

The user bears sole responsibility for any damage

caused by inappropriate use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your power tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Read the operating

instructions to reduce the risk of injury.

WARNING – Read all safety warnings,

instructions, illustrations and

specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Always include these documents when passing on

your power tool.

Wear ear protectors when impact drilling

(machines with the designation SB). Exposure

to noise can cause hearing loss.

Use the additional handle supplied with the

tool. Loss of control can cause personal injury.

Brace the power tool properly before use. This

tool produces a high output torque and without

properly bracing the tool during operation, loss of

control may occur resulting in personal injury.

Hold the power tool by insulated gripping

surfaces, when performing an operation where

the cutting accessory may contact hidden

wiring. Cutting accessory contacting a "live" wire

may make exposed metal parts of the power tool

"live" and could give the operator an electric shock.

Safety instructions when using long drill bits:

a) Never operate at higher speed than the

maximum speed rating of the drill bit. At higher

speeds, the bit is likely to bend if allowed to rotate

freely without contacting the workpiece, resulting in

personal injury.

b) Always start drilling at low speed and with

the bit tip in contact with the workpiece. At

higher speeds, the bit is likely to bend if allowed to

rotate freely without contacting the workpiece,

resulting in personal injury.

c) Apply pressure only in direct line with the bit

and do not apply excessive pressure. Bits can

bend causing breakage and loss of control,

resulting in personal injury.

Ensure that the spot where you wish to work is free

of power cables, gas lines or water pipes

(e.g.

using a metal detector).

Always hold the machine with both hands on the

designated handles, take a secure stance and

concentrate on the work.

Protect battery packs from water and

moisture!

Do not expose battery packs to fire!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short circuit battery pack contacts!

A slightly acidic, flammable fluid may leak

from defective Li-ion battery packs!

If battery fluid leaks out and comes into

contact with your skin, rinse immediately

with plenty of water. If battery fluid leaks out

and comes into contact with your eyes, wash them

with clean water and seek medical attention

immediately!

If the machine is defective, remove the battery pack

from the machine.

1. Declaration of Conformity

2. Specified Conditions of Use

3. General Safety Information

4. Special safety instructions

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Metabo BS 18 LTX BL Q I Atornillador taladrador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Metabo. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Metabo BS 18 LTX BL Q I Atornillador taladrador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Metabo Atornilladores taladrador
Más manuales de Atornilladores taladrador

Preguntas frecuentes sobre Metabo BS 18 LTX BL Q I Atornillador taladrador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Metabo BS 18 LTX Impuls Atornillador taladrador

Manual de uso

Metabo BS 18 LTX BL I Atornillador taladrador

Manual de uso

Metabo SB 18 LTX Impuls Atornillador taladrador

Manual de uso

Metabo SSD 18 LT Atornillador taladrador

Manual de uso

Metabo SSD 18 LTX 200 Atornillador taladrador

Manual de uso

Metabo SB 18 LT Atornillador taladrador

Manual de uso

Metabo SSW 18 LT 200 Atornillador taladrador

Manual de uso

Metabo DS 18DBFL2 Atornillador taladrador

Categorias relacionadas