Manual de uso Mothercare Convertible Silla alta de bebé

Manual de uso

3

care of your product

Periodically check all fittings to ensure that none have come loose.

The highchair can be cleaned by wiping with a damp cloth and drying with a soft

dry cloth.

Never clean with abrasive, ammonia based, bleach based, or spirit type cleaners.

Take care when handling or moving the highchair. Careless handling can damage

safety notes

WARNING: Do not leave the child unattended. A safety harness does not replace

adult supervision.

WARNING: do not use the highchair unless all components are correctly fitted and

adjusted.

The chair must be used with a safety harness approved to BS6684:1989, correctly

fitted and adjusted.

The Highchair must be used on a level and stable surface.

Once assembled, do not disassemble the highchair.

Strong heat sources, e.g. open, electric or gas fires in the vicinity of the highchair

may be dangerous if placed near the highchair.

Keep away from trailing cords, drapes or flexes, and away from electric sockets.

Never move (including rocking) the highchair with the child in it.

Never allow older children to climb on the highchair, especially while there is a child

in it.

When fitting the chair to the

table for use as a highchair,

ensure that the table surface

"H" is at the rear.

The lower rail of the chair

frame must sit squarely

on the cross rails "I”

and "J” and the front legs sit

squarely in the rear notches of

the footrest "K”

Refer to the diagram for

guidance.

Attach a safety harness to the

metal rings at the rear of the

right and the left chair frames

"A" and "B".

fig 3

fig 4

fitting the tray

WARNING: Ensure harness is correctly fitted.

WARNING: Be aware of the risk of open fires and other sources of strong heat, such

as electric bar fires, gas fires etc, in the vicinity of the highchair.

Once the Tray Brackets have been

secured to the underside of the Tray,

slide the locating ribs on the inside

faces of the Brackets onto the

corresponding grooves on the

outside of each chair frame. Pull

both spring loaded pins outwards

until they click into one of the two

locating holes in each groove.

(shown in fig 5)

WARNING: FAILURE TO ATTACH THE

TRAY IN ACCORDANCE WITH THE

INSTRUCTIONS COULD RESULT IN

THE CATCHES BREAKING.

On the underside of the tray “L”

attach the two Tray Brackets “O”

using the four Screws “P”

Ensure the spring loaded pins are

facing outwards.

(as shown in fig 4)

H

I J

K

Harness

Ring

fig 5

4

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Mothercare Convertible Silla alta de bebé. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Mothercare. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Mothercare Convertible Silla alta de bebé en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Mothercare Sillas altas de bebé
Más manuales de Sillas altas de bebé

Preguntas frecuentes sobre Mothercare Convertible Silla alta de bebé

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Mothercare Barcelona Silla alta de bebé

Manual de uso

Mothercare Fairground Silla alta de bebé

Manual de uso

Mothercare Fruit Salad Silla alta de bebé

Manual de uso

Mothercare Chevron Silla alta de bebé

Manual de uso

Mothercare Adjust With Me Silla alta de bebé

Manual de uso

Mothercare My Jungle Silla alta de bebé

Manual de uso

Mothercare Bear And Friends Silla alta de bebé

Manual de uso

Mothercare Picnic Silla alta de bebé

Categorias relacionadas