Manual de uso Panasonic ER-GC71S Cortapelos

Manual de uso

9

English

Preparation

Charging the clipper

• Make sure that the clipper is turned off.

1

Connect the appliance plug to the

appliance socket.

2

Plug in the adaptor into a

household outlet.

• Charging is completed after approx.

8 hours.

• Check that the charge indicator lamp

( ) glows.

1

2

3

Disconnect the adaptor after charging is completed.

(for safety and to reduce energy usage)

The charge indicator lamp ( ) continues to glow after

charging is complete. There is no indication to show that

“charging is complete”.

Notes

• If there is crackling noise on radios or other devices while

charging, charge the clipper using a different household outlet.

• When the appliance is not used for 6 months or more, the battery

will weaken (leak battery fluid, etc.). Fully charge the battery

once every 6 months.

• When charging the clipper for the first time or when it has not

been in use for more than 6 months, the charging time may

change or the lamp on the main body may not glow for a few

minutes. Please charge it for more than 16 hours in such cases.

• Recommended ambient temperature for charging is 0 °C – 35 °C

(32 °F – 95 °F). Battery performance may decrease outside of

the recommended temperature.

• A full charge supplies enough power for approximately

40 minutes of use.

The operating time may differ depending on the frequency of

use, the operating method and the ambient temperature.

• You can charge the battery before it is completely discharged.

However, it is recommended to charge when the battery is

completely discharged. The battery life depends strongly on

factors such as how it is used and stored.

• If the shape of the plug does not fit the power outlet, use an

attachment plug adaptor of the proper configuration.

Using the clipper

• Make sure that the clipper is turned off.

•

Apply the oil to the clipper before and after each use. (See page 14.)

• The appliance may not operate in an ambient temperature

approximately 0 °C (32 °F) or lower.

1

Mount the desired comb attachment and adjust

the trimming height as needed. (See page 10.)

• It can also be used without the comb attachment.

(Trimming height: approx. 0.5 mm (1/64˝))

2

Slide the power switch on the main body

to the “

” position to turn on the power.

Trimming hair (See page 11.)

Trimming beard

(See page 12.)

AC operation

If you connect the AC adaptor to the clipper in the same way as for

charging, and turn on the power, you can use it.

• If the remaining battery is too low, the blades may move slowly or

stop, even with the AC operation. In this case, charge the battery

for 3 minutes or more.

• The battery will be discharged, even with the AC operation.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Panasonic ER-GC71S Cortapelos. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Panasonic. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Panasonic ER-GC71S Cortapelos en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Panasonic Cortapelos
Más manuales de Cortapelos

Preguntas frecuentes sobre Panasonic ER-GC71S Cortapelos

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Panasonic ER-GP30K Cortapelos

Manual de uso

Panasonic ER-FGP82 Cortapelos

Manual de uso

Panasonic ER-HGP82 Cortapelos

Manual de uso

Panasonic ER-SB60 Cortapelos

Manual de uso

Panasonic ER-240 Cortapelos

Manual de uso

Panasonic ER-1610 Cortapelos

Manual de uso

Panasonic ER-1511 Cortapelos

Manual de uso

Panasonic ER-GP21K Cortapelos

Categorias relacionadas