Manual de uso Proxxon KG 50 Sierra de inglete

Manual de uso

- Keep handles dry, clean, and free of oil and grease.

15. Pull the plug from the electric socket

- when the power tool is not being used, before maintenance,

and when replacing tool parts such as the saw blade, drill,

or milling cutter.

16. Never leave any tools keys or chucks plugged in

- Before switching on, check to see if the key, chuck, and

adjusting tools have been removed.

17. Prevent unintended starts

- Ensure the switch is switched to the off position when plug-

ging the plug into the electrical outlet.

18. Use an extension cable for outdoor areas

- Use only approved and accordingly marked extension

cables when working outdoors.

19. Be alert

- Pay attention to what you are doing. Tackle the work with a

reasonable attitude. Do not use the power tool if you lack

concentration.

20. Check the power tool for any possible damage

- Before continued use of the power tool, protective equip-

ment and slightly damaged parts must be carefully checked

for their flawless functioning and that they function as

intended.

- Check to see if movable parts are working perfectly and do

not jam and if there are any damaged parts. All parts must

be correctly installed and all conditions fulfilled to ensure

the flawless operation of the power tool.

- Damaged protective equipment and parts must be repaired

or replaced by an authorized specialist workshop as direc-

ted unless otherwise specified in the operating instructions

- Damaged switches must be replaced by a customer service-

center.

- Do not use any power tools in which the switch cannot be

switched on and off.

21. CAUTION!

- The use of other tools and accessories can result in the risk

of injury.

22. Have your power tool repaired by a trained and skilled elec-

trician

- This power tools complies with the relevant safety regula-

tions. Repairs may only be carried out by skilled and trained

electricians with use of genuine spare parts. Otherwise,

accidents could result for the user.

2. General view (fig. 1)

1. Cutting head

2. Cutting disk cover

3. Blocking lever

4. Cutting disk

5. Device foot

6. Setscrew

7. Rotary plate

8. Stop screw

9. Spindle for clamping device

10. Limit stop

11. Clamping device

12. Scale

13. Fixing bore

3. Description of the machine

Thank you very much for acquiring a PROXXON KG 50 capping

device:

It is perfectly suited for small but precise applications when

cutting metal bars of up to diameters of ca. 10 mm, for cutting

wood, and plastic bars or profiles.

The device consists of a cutting head and a device foot made

from die-cast aluminum. The cutting head houses the device’s

electrical components as well as the synchronous belt-drive for

actuating the cutting blade. It can be swiveled up and down

through the use of a joint on the device foot and is held by a

spring in the upper setting in the neutral position.

The device foot contains a circular table that can be rotated 45°:

This allows simple and precise fabrication even of diagonal cuts.

On top of that, the scale on the side permits an exact and comfor-

table angular adjustment: after that, the circular table can be lok-

ked in place using a thumbscrew.

You can clamp the workpiece into the desired position using the

vice. The vice has a span of max. 20 mm and can hold size HO

model-railroad tracks by using a prism on the top (see fig. 6).

Fixating round materials is also made easy through the use of the

groove worked into the jaw.

Even cutting workpieces to length is perfectly possible with this

device through use of the limit stop: this can be set to a maxi-

mum length of 140 mm.

5-each ceramic-bonded cutting disks and a hollow hexagon

wrench are included with the device.

3.1. Technical data

Dimensions and weights:

Device foot: ca. 100/135 x 132 mm

Height: ca. 100 mm

(when the cutting head is in the rest position)

Width: ca. 140 mm

Vice

jaw width: 30 mm

Span: 20 mm

Weight: ca. 1.4 kg

Motor:

Voltage: 220 - 240 Volt,

50/60 Hz

Power consumption: 85 Watt 10 min

Speed: 8000/min

Cutting speed: ca. 25 m/sec.

Noise emission: < 70 dB(A)

For use in dry environments only

Protection class II device

Please do not dispose in domestic waste!

9

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Proxxon KG 50 Sierra de inglete. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Proxxon. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Proxxon KG 50 Sierra de inglete en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Proxxon Sierras de inglete
Más manuales de Sierras de inglete

Preguntas frecuentes sobre Proxxon KG 50 Sierra de inglete

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Makita M2300 Sierra de inglete

Manual de uso

Vito VISCME305 Sierra de inglete

Manual de uso

Scheppach HM305SL Sierra de inglete

Manual de uso

DeWalt DHS790AB Sierra de inglete

Manual de uso

Stayer SC 261 W Sierra de inglete

Manual de uso

DeWalt DWS713 Sierra de inglete

Manual de uso

Einhell TE-MS 254 T Sierra de inglete

Manual de uso

Stayer SC 291 W Sierra de inglete

Categorias relacionadas