Use and Care Guide
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
How to Use
A. Hypoallergenic flexing shaver foil
B. Flexible trimmer
C. Lifting combs
D. On/off switch
E. Head release button
F. Anti-Slip Grip
G. Bikini trimmer comb guard
Cleaning brush and Charger
(not shown)
READ ALL
INSTRUCTIONS
BEFORE USING.
DANGER
To reduce the risk of electric shock:
nDo not place or store this appliance
where it can fall or be pulled into a
tub or sink.
nExcept when charging, always
unplug this appliance from the
electrical outlet immediately
after using.
nUnplug this appliance before
cleaning it.
nDo not use an extension cord
or a voltage converter with this
appliance.
nDo not use while bathing or in the
shower if it is plugged in.
WARNING
n This appliance is not intended for use by
people (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
n Children should be supervised to ensure
they do not play with the appliance.
nUse this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by
manufacturer.
nNever drop or insert any object into
any opening.
nDo not use this appliance with a
damaged blades or foil as injury may
occur.
nFor household use only.
nDo not store at temperatures exceeding
60° C.
nDo not plug or unplug this appliance
when your hands are wet.
nDo not wrap the cord around the
appliance.
nAlways attach the plug to the
appliance, then to the outlet. To
disconnect, turn all controls to
OFF, then remove plug from outlet.
Detach removable power cords from
appliances for storage.
nNever drop or insert any object
into any of the appliance’s openings.
nThe power unit is intended to be
correctly oriented in a vertical or
floor mount position.
nDo not use this appliance with a
damaged or broken heads or cutters,
as injury may occur.
Be
patient when first using your lady
shaver, as with any new product, it may
take a little while to familiarise yourself
with the product. Take the time to
acquaint yourself with your shaver, as we
are confident you will receive years of
enjoyable use and complete satisfaction.
Cleaning and Maintenance
Performance Guarantee
Caring For Your Shaver
nTo ensure long lasting performance of
your shaver, clean the head assembly
regularly. The easiest and the most
hygienic way to clean the shaver is by
rinsing the having head after use with
warm water.
After each use
1. Ensure the shaver is turned off.
2. Press the side release button to slip open
the head assembly.
3. Blow any loose debris from the foil.
4. Brush or rinse any accumulated hair
from the main body of the shaver, head
assembly and cutter assembly.
5. Leave the head assembly open to allow
the shaver to dry completely.
NOTE:
nThe lady shaver is suitable for use in the
bath or shower.
nDo not rinse with water hotter than 70°C.
nDo not completely submerge the lady
shaver in water.
nEnsure that the lady shaver is turned off
when cleaning.
nDo not clean the shaving foils with the
brush.
nAt regular intervals, put a drop of sewing
machine oil onto the foils and cutter
heads.
Replacing your foil and cutters
nTo ensure the continued highest quality
performance from your shaver, we
recommend that the foil and cutter are
replaced every 6 months. These can be
obtained from our nearest Remington*
Service Centre.
Signs that your foils and cut-
ters need replacing.
nIrritation: as foils get worn, you may
experience skin irritation.
nPulling: as the cutters wear, your shave
may not feel as close and you may feel
the cutter pulling your hair.
nWear through: you may notice that the
cutters have worn through the foils.
To replace the foil
TO REPLACE THE FOIL
1. Ensure the shaver is switched off.
2. Gently push the small plastic tabs
at either end of the foil carrier. The
foil carrier should then easily detach
from the shaving head.
3. To reassemble, snap the new foil
carrier into position.
4. Attach the shaving head.
CAUTION
nOnly hold the plastic to prevent
damage to the foil.
nDo not press on the foil when
replacing.
TO REPLACE THE CUTTERS
1. Ensure the shaver is switched
off and open the shaving head.
(as above)
2. To remove cutter, grasp cutter
between thumb and forefinger and
pull upward.
3. To reassemble cutter, place cutter
onto oscillator tip. Gently push down
clicking into position.
To avoid environmental and health
problems due to hazardous substances in
electrical and electronic goods, appliances
marked with this symbol must not be
disposed of with unsorted municipal
waste, but recovered, reused or recycled.
Product Disposal
When your rechargeable shaver
reaches the end of its useful life, the
batteries must be removed from the
shaver and recycled or disposed of
properly in accordance with your state
and local requirements.
How to Remove the Batteries
from the WDF4821
1. Remove screw from bottom of shaver.
2. Separate top and bottom housings.
3. Unscrew and remove inner frame.
4. Open the inner housing and remove
the batteries.
5. Insulate battery ends by placing each
battery individually into separate
plastic bags or covering the terminals
of each battery completely with
plastic or non-conductive electrical
tape.
Questions or comments:
Visit www.productosremington.com
® Registered Trademark of
Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc.
12/18 Job#24580-00
T22-7000870-A
Spectrum Brands, Inc.
Middleton, WI 53562
Electrical Charasteristics
100-240V~ 50/60Hz
Your lady shaver is suitable for legs, under-
arms and the bikini area. It can be used dry
or in the shower.
GETTING READY
Please be patient when first using
your shaver, as with any new product,
it may take a little while to familiarize
yourself with the device. If you take
the time to acquaint yourself with
your shaver, we are confident you will
receive years of enjoyable use and
complete satisfaction.
INSTRUCTIONS FOR CHARGING
Always ensure that your hands, trim-
mer and power adaptor are dry before
charging.
Before using your REMINGTON
®
shaver for the first time, charge for 24
hours. For subsequent uses, charge
four hours before use. One full charge
allows 30 mins. of cordless usage
time.
Use product until the battery is low.
This is indicated by the shaver running
distinctly slower.
Your shaver cannot be overcharged,
however, if the product is not going to
be used for an extended time period
(2-3 months), unplug it from the outlet
and store. Fully recharge your shaver
when you would like to use it again.
To preserve the life of your batteries,
let them run out every six months then
recharge for 20 hours.
CHARGING CAUTIONS
nDo not attach the power adaptor to
the outlet with wet hands.
nAlways charge the shaver in a cool,
dry place.
nDo not charge the shaver in close
proximity to water.
nThe shaver can be attached
to an electrical outlet voltage
of 120V only.
For regular shaving:
1. Switch the shaver on.
2. Hold the shaver at a right angle to your
skin and move the shaver against the
direction of the hair growth.
3. After shaving, turn the shaver off.
NOTE: Before dry shaving, ensure the area is
clean, dry and free from creams or oils.
For longer hairs:
4. If you have not shaved for a while, use
the trimmer before shaving. This will help
you achieve a more effective shaving
result.
5. Hold the shaver with the trimmer facing
your leg and slightly tilted towards you
(approximately a 45° angle).
Trimming and shaping:
6. Attach the bikini trimmer attachment.
7. Hold the shaver at a right angle to your
skin and press down gently.
8. Edge and shape the areas as desired.
For best shaving performance:
9. We recommend that you use your new
shaver daily for 2-3 weeks to allow time
to find the optimum shaving methods
for your particular type of hair growth
patterns.
CAUTION: If your skin is easily irritated by
shaving or you suffer from skin allergies,
you should test a section of your arm or
leg before using the shaver.
WDF4821
B.
C.
D.
G.
E.
F.
A.
Únase a la conversación sobre este producto
Aquí puedes compartir lo que piensas sobre Remington WDF4821 Afeitadora. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.