Manual de uso Russell Hobbs 14993-56 Auto Steam Plancha

Manual de uso

3

3 Iron an old piece of cotton fabric, to clean the soleplate.

4 Press the S and * buttons 3 or 4 times, to check them.

C PREPARATION

5 Check for textile care symbols (i j k l).

6 Iron fabrics needing low temperatures j first, then those that need medium temperatures

k, and finish with those needing high temperatures l.

X FILLING

, Do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.

7 The iron may be used with tap-water, but if you live in a hard-water area, you should use

distilled water (not chemically descaled water).

8 If you buy distilled water, check that it is marketed as suitable for irons.

9 Don’t add anything to the water – you’ll damage the iron.

10 Unplug the appliance.

11 Open the water inlet cover.

12 Tilt the iron till the water inlet cover is vertical.

13 Pour water from the jug into the water inlet.

14 Pour slowly, to allow the air in the reservoir to escape, and avoid an airlock.

15 Don’t fill past the max mark on the reservoir, or water will escape in use.

16 Close the water inlet cover.

17 Wipe up any spillage.

C SWITCH ON

18 Sit the iron on its heel.

19 Put the plug into the power socket.

20 Turn the temperature control to bring the setting you want (see the guide below) next to the

notch.

21 The light will glow.

22 When the iron reaches the set temperature, the light will go off.

23 It will then cycle on and off as the thermostat operates to maintain the temperature.

temperature setting guide

label marking temperature setting

j cool – nylon, acrylics, polyester •

k warm – wool, polyester mixtures ••

l hot – cotton, linen •••/max

i do not iron

, If the instructions on the fabric label differ from this guide, follow the instructions on the

label.

C REDUCING TEMPERATURE

24 Reducing temperature takes longer, as the appliance has to lose heat.

25 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 6).

n DRY IRONING

26 Do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.

27 Wait till the light goes off, then start ironing.

instructions

diagrams

1 light

2 temperature control

3 steam available

4 notch

5 water inlet

6 water inlet cover

7 spray nozzle

8 soleplate

9 steam vents

10 reservoir

11 heel

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Russell Hobbs 14993-56 Auto Steam Plancha. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Russell Hobbs. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Russell Hobbs 14993-56 Auto Steam Plancha en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Russell Hobbs Planchas
Más manuales de Planchas

Preguntas frecuentes sobre Russell Hobbs 14993-56 Auto Steam Plancha

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Russell Hobbs 24800-56 Plancha

Manual de uso

Russell Hobbs 25090 One Temperature Plancha

Manual de uso

Russell Hobbs 14991-56 Auto Steam Plancha

Manual de uso

Russell Hobbs 18464-56 Power Steam Digital Plancha

Manual de uso

Russell Hobbs 15129-56 Steam Tip Plancha

Manual de uso

Russell Hobbs 27281 Plancha

Manual de uso

Russell Hobbs 26483-56 Plancha

Manual de uso

Russell Hobbs 21260-56 SmartFill Plancha

Categorias relacionadas