Manual de uso Ruwido Easytip S7 Control remoto

Manual de uso

5 seconds) until the LED flashes twice. Continue with step 3.

CD, TAPE, TUNER

Press the Preselection key to get to the AUDIO-mode. Then choose the device you want

to adjust by pressing the Level key and keep it pressed (for about 5 seconds) until the

LED blinks twice. Continue with step 3.

AMPLIFIER

Press the Preselection key to get to the AUDIO-mode. Then choose the device you want

to adjust by pressing the level key and keep it pressed (for about 5 seconds) until the LED

blinks twice. Then press the Preselection key “TUNER” briefly to get to the AMPLIFIER-

mode. Continue with step 3.

3. Enter code 001 (code search) with the number keys. The LED blinks twice.

4. Manual operation: Keep pressing the Power/Standby-key for TV, SAT and AMPLIFIER,

the Stop-key for VCR, CD and TAPE or the Numberkey 2 for TUNER at short intervals,

until the device shows reaction.

Automatic operation: Press the Power/Standby-key for TV, SAT and

AMPLIFIER, the Stop-key for VCR, CD and TAPE or the Numberkey 2 for TUNER, until

your device shows reaction. Every 1.5 seconds the TV code is continued automatically

and the appropriate standby command is sent.

5. When your easytip S7 has found the right code your device switches off and you can then

release the key.

Continue with step 5.

6. Now press the Level key again until the LED blinks twice. This shows you that your easy-

tip S7 has stored the appropriate code number.

Now check the function of your remote control. If your easytip S7 does not react to the

code number it has found, repeat steps 1 to 5 until you have found a optimal code num-

ber.

ATTENTION!

A new code search begins with the last code number found in the previous search. When the

end of the code list is reached the LED will blink three times. The search is then repeated

from the beginning. Please be patient. There may be many codes to search through before

the code for your equipment is found.

Changing the direction or the search:

It is possible, particularly in automatic search mode, to skip over the relevant code by mista-

ke. In this case, you can reverse the direction of the search for a maximum of 5 codes by

pressing the Vol-key.

ATTENTION!

After 5 codes the search direction changes back automatically. If you want, you can press

the Vol+ -key to change back to the original search direction.

Adjusting color, contrast, bass, treble,...

for your TV set

1. Press the Level key.

2. Briefly press the Shift-key.

3. Press the wanted key within 5 seconds.

Numberkey 1 = Brightness

Numberkey 2 = Color

Numberkey 3 = Contrast

Numberkey 4 = Treble

Numberkey 5 = Bass

Numberkey 6 = Balance

4. You can adjust your device by using keys Vol- and Vol+.

5. After the end of adjusting, wait for about 5 seconds until the keys get back their normal

function.

Querying the Code Numbers

You will need this function to query the code found by the automatic code search, so that

you can note it down in this operating manual.

1. Press the chosen Level key (TV, SAT, VCR, CD,...) until the LED blinks twice.

2. Now enter code 002 for query mode.

ATTENTION!

The first figure of the 3-digit cod must be entered within 5 seconds of the LED blinking twice.

Otherwise the LED will flash once and you will have to repeat the procedure from step 1.

3. Now press key 1 and count the number of times the LED blinks. (For example, if the LED

blinks twice the first number in your code is 2).

Now press key 2 and count the times the times the LED blinks. (For example, if the LED

does not blink, the second number in your code is 0).

4

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Ruwido Easytip S7 Control remoto. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Ruwido. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Ruwido Easytip S7 Control remoto en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Ruwido Controles remotos
Más manuales de Controles remotos

Preguntas frecuentes sobre Ruwido Easytip S7 Control remoto

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Ruwido Digital 2 Control remoto

Manual de uso

Ruwido Easytip S3 Control remoto

Manual de uso

Ruwido Easytip S5 Control remoto

Manual de uso

Ruwido Easytip S9 Control remoto

Manual de uso

Ruwido Easytip S2 Control remoto

Manual de uso

Ruwido Easytip Z3 Control remoto

Manual de uso

Ruwido Easytip Z1 Control remoto

Manual de uso

Ruwido M_4 Control remoto

Categorias relacionadas