Manual de uso Ryobi R18PL-0 Cepillo

Manual de uso

1

English |

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Safety, performance, and dependability have been given

top priority in the design of your planer.

INTENDED USE

The planer is intended to be used only by adults who have

read and understood the instructions and warnings in

this manual, and can be considered responsible for their

actions.

The product is intended for planing wood (removing an

even layer to provide a smooth, at nish) and rebating

wood.

The product is not intended to be used for stationary

planing.

The product should only be used in well ventilated areas.

The product is intended for consumer use only. Do not use

the product for any other purpose.

WARNING

Read all safety warnings, instructions, illustrations

and specifications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

PLANER SAFETY WARNINGS

■ Wait for the cutter to stop before setting the tool

down. An exposed rotating cutter may engage the

surface, leading to possible loss of control and serious

injury.

■ Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by your hand or against the body leaves it

unstable and may lead to loss of control.

ADDITIONAL SAFETY RULES

■ Hold the tool by insulated gripping surfaces only.

Cutting a “live” wire may make the exposed metal parts

of the tool “live” and could give the operator an electric

shock.

■ The dust produced when using this tool may be harmful

to health. Do not inhale the dust. Use a dust absorption

system and wear a suitable dust protection mask.

Remove deposited dust thoroughly, e.g., with a vacuum

cleaner.

■ Do not remove splinters or saw dust while tool is

running.

■ Only plane with sharp blades, avoid metals (nails,

screws). Check the workpiece before planing.

■ Do not reach into the danger area of the tool when

plugged in.

■ Place the front plate of the machine on to the workpiece

and switch on, before the planer blade touches the

workpiece and then guide evenly over the workpiece.

■ The v-shape notch in the front of the supporting plate

ensures safe chamfering of edges.

Note: The self opening swivel guard should be lifted only

by the workpiece or with the lever.

Note: Do not reach into the dust port with your ngers.

They could be injured by the rotating blades.

■ Stop the product, make sure that the blade comes to a

complete stop and remove the battery before:

● Cleaning a blockage or unclogging

● Checking, cleaning or working on the product

■ Use the dust collection device or connect a dust

extraction vacuum when operating the product.

■ Ambient temperature range for tool during operation is

between 0°C and 40°C.

■ Ambient temperature range for tool storage is between

0°C and 40°C.

■ The recommended ambient temperature range for the

charging system during charging is between 10°C and

38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING

To reduce the risk of re, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in uid or allow a uid to

ow inside them. Corrosive or conductive uids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

■ Ambient temperature range for battery during use is

between 0°C and 40°C.

■ Ambient temperature range for battery storage is

between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps

or tape. Do not transport batteries that are cracked or

leaking. Check with the forwarding company for further

advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still

impossible to completely eliminate certain residual risk

factors. The following hazards may arise and the operator

should pay special attention to avoid the following:

■ Injury caused by dust

– Using the product will produce considerable amount

of dust and fine particles. Use the dust collection

device or connect a dust extraction vacuum when

operating the product. Wear dust masks containing

filters appropriate to the materials being worked

on. Ensure adequate workplace ventilation. Do not

eat, drink, or smoke in the work area. Only operate

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Ryobi R18PL-0 Cepillo. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Ryobi. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Ryobi R18PL-0 Cepillo en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Ryobi Cepillos
Más manuales de Cepillos

Preguntas frecuentes sobre Ryobi R18PL-0 Cepillo

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Ryobi EPN7582N Cepillo

Manual de uso

Ryobi EPN6028C Cepillo

Manual de uso

Valex LN850 Cepillo

Manual de uso

Daihatsu HI-CG20 Cepillo

Manual de uso

Hitachi P 20DA Cepillo

Manual de uso

DeWalt DW735X Cepillo

Manual de uso

Ratio CR900NM Cepillo

Manual de uso

Metabo HO 18 LTX 20-82 Cepillo

Categorias relacionadas