Manual de uso SentrySafe 6330 Caja fuerte

Manual de uso

2

2

Gain entry with the basic electronic lock

The handle should be all of the way UP, in the

horizontal position before attempting to open safe.

Opening your safe for the first time (keep door

open during setup):

1. Insert a paper clip or pen point into

the small hole of the battery cover located

directly below the keypad. Push in while

sliding cover to the right (Fig. B).

2. Disconnect and remove battery holder.

• Insert 4 new AA batteries (not included)

to power this lock.

• Reconnect the battery holder and put back into proper

position. Slide battery cover back in place.

NOTE: The yellow LED will light when the batteries need

to be replaced.

3.

Simply insert the key (if equipped) in the lock and

turn until the plunger pops out. Remove key.

4. Enter the factory code (printed on the first page of this

guide). When the green light appears, you have four

seconds to turn the handle down to open. Try this several

times before proceeding to the next step.

To unlock safe:

Enter the 5-digit factory code, a pre-programmed user code,

or a pre-programmed user pin (programming instructions

to follow). When the green LED lights you have 4 seconds

to turn the handle and open the safe.

To lock safe:

Close the door and return the handle to the horizontal

position. For greatest security, depress the key lock

(if equipped) with your finger.

NOTE: If your unit is equipped with a water-resistant

gasket additional pressure to the left corner of the door

may be required before the handle can be returned to the

horizontal position.

Access codes

There are 3 possible ways to unlock and access the safe:

1. Factory code

(Found on the front cover of this guide.) You can always

open the safe by entering the pre-set 5-digit factory code.

This code cannot be deleted.

2. User code

If you prefer to employ your own code, you can program

the safe to open using a 5-digit user code of your choice.

3. User pin

If you wish to give someone else temporary access to the

safe, you can program a 5-digit user pin that can later

be erased.

Programming the user code

NOTE: One (1) user code is allowed.

To add:

1. Press the Prog key , then enter the 5-digit factory code.

2. Enter the 5-digit user code of your choice.

To delete:

1. Press the Prog key.

2. Enter the 5-digit factory code twice.

Programming user pin

NOTE: One (1) user pin is allowed.

To add:

1. Press the Prog key 2 times.

2. Enter your 5-digit user code.

3. Enter the 5-digit user pin of your choice.

To delete:

1. Press the Prog key 2 times.

2. Enter your 5-digit user code.

3. Enter 0, 0, 0, 0, 0.

NOTE: If your safe does not appear to be working, please

check batteries before calling Sentry Customer Care.

Signals

Your electronic-lock safe communicates by means of several

audio/visual signals.

Red (Error) LED + three beeps indicates one

of the following:

1. You have pressed Program key out of sequence.

2. You have entered an invalid code or user pin.

3. You have let 5 seconds or more elapse between

key presses.

4. Lights after three consecutive invalid codes are input

(2-minute delay mode).

Green LED only:

1. Comes ON after you enter a valid code and remains

lit during the 4-second period in which the safe can be

opened.

2. Comes ON in the Programming mode and remains

lit until you have finished entering a 5-digit code.

Yellow LED only:

1. Comes ON when the batteries need to be replaced.

123

4 5 6

789

0

123

4 5 6

789

0

B

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus SentrySafe 6330 Caja fuerte. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con SentrySafe. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu SentrySafe 6330 Caja fuerte en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para SentrySafe Cajas fuertes
Más manuales de Cajas fuertes

Preguntas frecuentes sobre SentrySafe 6330 Caja fuerte

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

SentrySafe SFW123GDF Caja fuerte

Manual de uso

SentrySafe SFW082F Caja fuerte

Manual de uso

SentrySafe QAP1BLX Caja fuerte

Manual de uso

SentrySafe QAP1E Caja fuerte

Manual de uso

SentrySafe SFW123TSC Caja fuerte

Manual de uso

SentrySafe SFW123BDC Caja fuerte

Manual de uso

SentrySafe FPW082HSB Caja fuerte

Manual de uso

SentrySafe SFW123CTB Caja fuerte

Categorias relacionadas